> -----Original Message-----
> From: Pavan Nikhilesh Bhagavatula <pbhagavat...@marvell.com>
> Sent: Thursday, March 25, 2021 2:54 PM
> To: Jayatheerthan, Jay <jay.jayatheert...@intel.com>; Jerin Jacob
> Kollanukkaran <jer...@marvell.com>; Carrillo, Erik G
> <erik.g.carri...@intel.com>; Gujjar, Abhinandan S
> <abhinandan.guj...@intel.com>; McDaniel, Timothy
> <timothy.mcdan...@intel.com>; hemant.agra...@nxp.com; Van Haaren, Harry
> <harry.van.haa...@intel.com>; mattias.ronnblom
> <mattias.ronnb...@ericsson.com>; Ma, Liang J <liang.j...@intel.com>; Ray
> Kinsella <m...@ashroe.eu>; Neil Horman
> <nhor...@tuxdriver.com>
> Cc: dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v5 2/8] eventdev: introduce event vector Rx
> capability
>
> >> From: pbhagavat...@marvell.com <pbhagavat...@marvell.com>
> >> Sent: Wednesday, March 24, 2021 10:35 AM
> >> To: jer...@marvell.com; Jayatheerthan, Jay
> ><jay.jayatheert...@intel.com>; Carrillo, Erik G
> ><erik.g.carri...@intel.com>; Gujjar,
> >> Abhinandan S <abhinandan.guj...@intel.com>; McDaniel, Timothy
> ><timothy.mcdan...@intel.com>; hemant.agra...@nxp.com; Van
> >> Haaren, Harry <harry.van.haa...@intel.com>; mattias.ronnblom
> ><mattias.ronnb...@ericsson.com>; Ma, Liang J
> >> <liang.j...@intel.com>; Ray Kinsella <m...@ashroe.eu>; Neil Horman
> ><nhor...@tuxdriver.com>
> >> Cc: dev@dpdk.org; Pavan Nikhilesh <pbhagavat...@marvell.com>
> >> Subject: [dpdk-dev] [PATCH v5 2/8] eventdev: introduce event vector
> >Rx capability
> >>
> >> From: Pavan Nikhilesh <pbhagavat...@marvell.com>
> >>
> >> Introduce event ethernet Rx adapter event vector capability.
> >>
> >> If an event eth Rx adapter has the capability of
> >> RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR then a given Rx
> >queue
> >> can be configured to enable event vectorization by passing the
> >> flag RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR to
> >> rte_event_eth_rx_adapter_queue_conf::rx_queue_flags while
> >configuring
> >> Rx adapter through rte_event_eth_rx_adapter_queue_add().
> >>
> >> The max vector size, vector timeout define the vector size and
> >> mempool used for allocating vector event are configured through
> >> rte_event_eth_rx_adapter_queue_add. The element size of the
> >element
> >> in the vector pool should be equal to
> >> sizeof(struct rte_event_vector) + (vector_sz * sizeof(uintptr_t))
> >>
> >> Application can use `rte_event_vector_pool_create` to create the
> >> vector mempool used for
> >> rte_event_eth_rx_adapter_queue_conf::vector_mp.
> >>
> >> The Rx adapter would be responsible for vectorizing the mbufs
> >> based on the flow, the vector limits configured by the application
> >> and add the vector event of mbufs to the event queue set via
> >> rte_event_eth_rx_adapter_queue_conf::ev::queue_id.
> >> It should also mark rte_event_vector::union_valid and fill
> >> rte_event_vector::port, rte_event_vector::queue.
> >>
> >> Signed-off-by: Pavan Nikhilesh <pbhagavat...@marvell.com>
> >> Acked-by: Jerin Jacob <jer...@marvell.com>
> >> ---
> >> .../prog_guide/event_ethernet_rx_adapter.rst | 38 ++++++
> >> lib/librte_eventdev/eventdev_pmd.h | 53 ++++++++
> >> .../rte_event_eth_rx_adapter.c | 114 ++++++++++++++++++
> >> .../rte_event_eth_rx_adapter.h | 105 ++++++++++++++++
> >> lib/librte_eventdev/rte_eventdev.h | 30 ++++-
> >> lib/librte_eventdev/version.map | 2 +
> >> 6 files changed, 340 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> >b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> >> index cb44ce0e4..5eefef355 100644
> >> --- a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> >> +++ b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> >> @@ -186,3 +186,41 @@ the event buffer fill level is low. The
> >> ``rte_event_eth_rx_adapter_cb_register()`` function allow the
> >application
> >> to register a callback that selects which packets to enqueue to the
> >event
> >> device.
> >> +
> >> +Rx event vectorization
> >> +~~~~~~~~~~~~~~~~~~~~~~
> >> +
> >> +The event devices, ethernet device pairs which support the capability
> >> +``RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR`` can
> >aggregate packets based on
> >> +flow characteristics and generate a ``rte_event`` containing
> >``rte_event_vector``
> >> +whose event type is either ``RTE_EVENT_TYPE_ETHDEV_VECTOR`` or
> >> +``RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR``.
> >> +The aggregation size and timeout are configurable at a queue level
> >and the
> >> +maximum, minimum vector sizes and timeouts vary based on the
> >device capability
> >> +and can be queried using
> >``rte_event_eth_rx_adapter_vector_limits_get``.
> >> +The Rx adapter additionally might include useful data such as
> >ethernet device
> >> +port and queue identifier in the ``rte_event_vector::port`` and
> >> +``rte_event_vector::queue`` and mark
> >``rte_event_vector::attr_valid`` as true.
> >> +
> >> +A loop processing ``rte_event_vector`` containing mbufs is shown
> >below.
> >> +
> >> +.. code-block:: c
> >> +
> >> + event = rte_event_dequeue_burst(event_dev, event_port,
> >&event,
> >> + 1, 0);
> >> + if (!event)
> >> + continue;
> >> +
> >> + switch (ev.event_type) {
> >> + case RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR:
> >> + case RTE_EVENT_TYPE_ETHDEV_VECTOR:
> >> + struct rte_mbufs **mbufs;
> >> +
> >> + mbufs = (struct rte_mbufs **)ev[i].vec->mbufs;
> >> + for (i = 0; i < ev.vec->nb_elem; i++) {
> >> + /* Process each mbuf. */
> >> + }
> >> + break;
> >> + case ...
> >> + ...
> >> + }
> >> diff --git a/lib/librte_eventdev/eventdev_pmd.h
> >b/lib/librte_eventdev/eventdev_pmd.h
> >> index 7eb9a7739..9297f1433 100644
> >> --- a/lib/librte_eventdev/eventdev_pmd.h
> >> +++ b/lib/librte_eventdev/eventdev_pmd.h
> >> @@ -645,6 +645,53 @@ typedef int
> >(*eventdev_eth_rx_adapter_stats_reset)
> >> */
> >> typedef int (*eventdev_selftest)(void);
> >>
> >> +struct rte_event_eth_rx_adapter_vector_limits;
> >> +/**
> >> + * Get event vector limits for a given event, ethernet device pair.
> >> + *
> >> + * @param dev
> >> + * Event device pointer
> >> + *
> >> + * @param eth_dev
> >> + * Ethernet device pointer
> >> + *
> >> + * @param[out] limits
> >> + * Pointer to the limits structure to be filled.
> >> + *
> >> + * @return
> >> + * - 0: Success.
> >> + * - <0: Error code returned by the driver function.
> >> + */
> >> +typedef int (*eventdev_eth_rx_adapter_vector_limits_get_t)(
> >> + const struct rte_eventdev *dev, const struct rte_eth_dev
> >*eth_dev,
> >> + struct rte_event_eth_rx_adapter_vector_limits *limits);
> >> +
> >> +struct rte_event_eth_rx_adapter_event_vector_config;
> >> +/**
> >> + * Enable event vector on an given Rx queue of a ethernet devices
> >belonging to
> >> + * the Rx adapter.
> >> + *
> >> + * @param dev
> >> + * Event device pointer
> >> + *
> >> + * @param eth_dev
> >> + * Ethernet device pointer
> >> + *
> >> + * @param rx_queue_id
> >> + * The Rx queue identifier
> >> + *
> >> + * @param config
> >> + * Pointer to the event vector configuration structure.
> >> + *
> >> + * @return
> >> + * - 0: Success.
> >> + * - <0: Error code returned by the driver function.
> >> + */
> >> +typedef int (*eventdev_eth_rx_adapter_event_vector_config_t)(
> >> + const struct rte_eventdev *dev, const struct rte_eth_dev
> >*eth_dev,
> >> + int32_t rx_queue_id,
> >> + const struct rte_event_eth_rx_adapter_event_vector_config
> >*config);
> >> +
> >> typedef uint32_t rte_event_pmd_selftest_seqn_t;
> >> extern int rte_event_pmd_selftest_seqn_dynfield_offset;
> >>
> >> @@ -1067,6 +1114,12 @@ struct rte_eventdev_ops {
> >> /**< Get ethernet Rx stats */
> >> eventdev_eth_rx_adapter_stats_reset
> >eth_rx_adapter_stats_reset;
> >> /**< Reset ethernet Rx stats */
> >> + eventdev_eth_rx_adapter_vector_limits_get_t
> >> + eth_rx_adapter_vector_limits_get;
> >> + /**< Get event vector limits for the Rx adapter */
> >> + eventdev_eth_rx_adapter_event_vector_config_t
> >> + eth_rx_adapter_event_vector_config;
> >> + /**< Configure Rx adapter with event vector */
> >>
> >> eventdev_timer_adapter_caps_get_t timer_adapter_caps_get;
> >> /**< Get timer adapter capabilities */
> >> diff --git a/lib/librte_eventdev/rte_event_eth_rx_adapter.c
> >b/lib/librte_eventdev/rte_event_eth_rx_adapter.c
> >> index d8c635e99..ac8ba5bf0 100644
> >> --- a/lib/librte_eventdev/rte_event_eth_rx_adapter.c
> >> +++ b/lib/librte_eventdev/rte_event_eth_rx_adapter.c
> >> @@ -2263,6 +2263,120 @@
> >rte_event_eth_rx_adapter_queue_del(uint8_t id, uint16_t eth_dev_id,
> >> return ret;
> >> }
> >>
> >> +int
> >> +rte_event_eth_rx_adapter_queue_event_vector_config(
> >> + uint8_t id, uint16_t eth_dev_id, int32_t rx_queue_id,
> >> + struct rte_event_eth_rx_adapter_event_vector_config *config)
> >> +{
> >> + struct rte_event_eth_rx_adapter_vector_limits limits;
> >> + struct rte_event_eth_rx_adapter *rx_adapter;
> >> + struct rte_eventdev *dev;
> >> + uint32_t cap;
> >> + int ret;
> >> +
> >> + RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_ERR_RET(id, -
> >EINVAL);
> >> + RTE_ETH_VALID_PORTID_OR_ERR_RET(eth_dev_id, -EINVAL);
> >> +
> >> + rx_adapter = rxa_id_to_adapter(id);
> >> + if ((rx_adapter == NULL) || (config == NULL))
> >> + return -EINVAL;
> >> +
> >> + dev = &rte_eventdevs[rx_adapter->eventdev_id];
> >> + ret = rte_event_eth_rx_adapter_caps_get(rx_adapter-
> >>eventdev_id,
> >> + eth_dev_id, &cap);
> >> + if (ret) {
> >> + RTE_EDEV_LOG_ERR("Failed to get adapter caps edev
> >%" PRIu8
> >> + "eth port %" PRIu16,
> >> + id, eth_dev_id);
> >> + return ret;
> >> + }
> >> +
> >> + if (!(cap &
> >RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR)) {
> >> + RTE_EDEV_LOG_ERR("Event vectorization is not
> >supported,"
> >> + " eth port: %" PRIu16 " adapter id: %"
> >PRIu8,
> >> + eth_dev_id, id);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + ret = rte_event_eth_rx_adapter_vector_limits_get(
> >> + rx_adapter->eventdev_id, eth_dev_id, &limits);
> >> + if (ret) {
> >> + RTE_EDEV_LOG_ERR("Failed to get vector limits edev
> >%" PRIu8
> >> + "eth port %" PRIu16,
> >> + rx_adapter->eventdev_id, eth_dev_id);
> >> + return ret;
> >> + }
> >> +
> >> + if (config->vector_sz < limits.min_sz ||
> >> + config->vector_sz > limits.max_sz ||
> >> + config->vector_timeout_ns < limits.min_timeout_ns ||
> >> + config->vector_timeout_ns > limits.max_timeout_ns ||
> >> + config->vector_mp == NULL) {
> >> + RTE_EDEV_LOG_ERR("Invalid event vector
> >configuration,"
> >> + " eth port: %" PRIu16 " adapter id: %"
> >PRIu8,
> >> + eth_dev_id, id);
> >> + return -EINVAL;
> >> + }
> >> + if (config->vector_mp->elt_size <
> >> + (sizeof(struct rte_event_vector) +
> >> + (sizeof(uintptr_t) * config->vector_sz))) {
> >> + RTE_EDEV_LOG_ERR("Invalid event vector
> >configuration,"
> >> + " eth port: %" PRIu16 " adapter id: %"
> >PRIu8,
> >> + eth_dev_id, id);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + if (cap &
> >RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT) {
> >> + RTE_FUNC_PTR_OR_ERR_RET(
> >> + *dev->dev_ops-
> >>eth_rx_adapter_event_vector_config,
> >> + -ENOTSUP);
> >> + ret = dev->dev_ops-
> >>eth_rx_adapter_event_vector_config(
> >> + dev, &rte_eth_devices[eth_dev_id],
> >rx_queue_id, config);
> >> + } else {
> >> + ret = -ENOTSUP;
> >> + }
> >
> >Trying to understand why non-INTERNAL_PORT based event device
> >implementation returns ENOTSUP. Do you foresee any issues if such a
> >device implements this function?
> >
>
> I just didn't want to move the implementation here as this patch is only
> Intended for spec.
> The implementation for non-INTERNAL_PORT is in 4/8
Makes sense. Thanks!
>
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int
> >> +rte_event_eth_rx_adapter_vector_limits_get(
> >> + uint8_t dev_id, uint16_t eth_port_id,
> >> + struct rte_event_eth_rx_adapter_vector_limits *limits)
> >> +{
> >> + struct rte_eventdev *dev;
> >> + uint32_t cap;
> >> + int ret;
> >> +
> >> + RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
> >> + RTE_ETH_VALID_PORTID_OR_ERR_RET(eth_port_id, -EINVAL);
> >> +
> >> + if (limits == NULL)
> >> + return -EINVAL;
> >> +
> >> + dev = &rte_eventdevs[dev_id];
> >> +
> >> + ret = rte_event_eth_rx_adapter_caps_get(dev_id, eth_port_id,
> >&cap);
> >> + if (ret) {
> >> + RTE_EDEV_LOG_ERR("Failed to get adapter caps edev
> >%" PRIu8
> >> + "eth port %" PRIu16,
> >> + dev_id, eth_port_id);
> >> + return ret;
> >> + }
> >> +
> >> + if (cap &
> >RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT) {
> >> + RTE_FUNC_PTR_OR_ERR_RET(
> >> + *dev->dev_ops-
> >>eth_rx_adapter_vector_limits_get,
> >> + -ENOTSUP);
> >> + ret = dev->dev_ops-
> >>eth_rx_adapter_vector_limits_get(
> >> + dev, &rte_eth_devices[eth_port_id], limits);
> >> + } else {
> >> + ret = -ENOTSUP;
> >> + }
> >> +
> >
> >Same here.
> >
> >> + return ret;
> >> +}
> >> +
> >> int
> >> rte_event_eth_rx_adapter_start(uint8_t id)
> >> {
> >> diff --git a/lib/librte_eventdev/rte_event_eth_rx_adapter.h
> >b/lib/librte_eventdev/rte_event_eth_rx_adapter.h
> >> index 21bb1e54c..7407cde00 100644
> >> --- a/lib/librte_eventdev/rte_event_eth_rx_adapter.h
> >> +++ b/lib/librte_eventdev/rte_event_eth_rx_adapter.h
> >> @@ -92,6 +92,10 @@ extern "C" {
> >> /**< This flag indicates the flow identifier is valid
> >> * @see rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
> >> */
> >> +#define RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR
> > 0x2
> >> +/**< This flag indicates that mbufs arriving on the queue need to be
> >vectorized
> >> + * @see rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
> >> + */
> >>
> >> /**
> >> * Adapter configuration structure that the adapter configuration
> >callback
> >> @@ -169,6 +173,36 @@ struct
> >rte_event_eth_rx_adapter_queue_conf {
> >> */
> >> };
> >>
> >> +struct rte_event_eth_rx_adapter_event_vector_config {
> >> + uint16_t vector_sz;
> >> + /**<
> >> + * Indicates the maximum number for mbufs to combine and
> >form a vector.
> >> + * Should be within
> >> + * @see
> >rte_event_eth_rx_adapter_vector_limits::min_vector_sz
> >> + * @see
> >rte_event_eth_rx_adapter_vector_limits::max_vector_sz
> >> + * Valid when
> >RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR flag is set in
> >> + * @see
> >rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
> >> + */
> >> + uint64_t vector_timeout_ns;
> >> + /**<
> >> + * Indicates the maximum number of nanoseconds to wait for
> >receiving
> >> + * mbufs. Should be within vectorization limits of the
> >> + * adapter
> >> + * @see
> >rte_event_eth_rx_adapter_vector_limits::min_vector_ns
> >> + * @see
> >rte_event_eth_rx_adapter_vector_limits::max_vector_ns
> >> + * Valid when
> >RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR flag is set in
> >> + * @see
> >rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
> >> + */
> >> + struct rte_mempool *vector_mp;
> >> + /**<
> >> + * Indicates the mempool that should be used for allocating
> >> + * rte_event_vector container.
> >> + * Should be created by using `rte_event_vector_pool_create`.
> >> + * Valid when
> >RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR flag is set in
> >> + * @see
> >rte_event_eth_rx_adapter_queue_conf::rx_queue_flags.
> >> + */
> >> +};
> >> +
> >> /**
> >> * A structure used to retrieve statistics for an eth rx adapter
> >instance.
> >> */
> >> @@ -199,6 +233,32 @@ struct rte_event_eth_rx_adapter_stats {
> >> /**< Received packet count for interrupt mode Rx queues */
> >> };
> >>
> >> +/**
> >> + * A structure used to retrieve eth rx adapter vector limits.
> >> + */
> >> +struct rte_event_eth_rx_adapter_vector_limits {
> >> + uint16_t min_sz;
> >> + /**< Minimum vector limit configurable.
> >> + * @see
> >rte_event_eth_rx_adapter_event_vector_config::vector_sz
> >> + */
> >> + uint16_t max_sz;
> >> + /**< Maximum vector limit configurable.
> >> + * @see
> >rte_event_eth_rx_adapter_event_vector_config::vector_sz
> >> + */
> >> + uint8_t log2_sz;
> >> + /**< True if the size configured should be in log2.
> >> + * @see
> >rte_event_eth_rx_adapter_event_vector_config::vector_sz
> >> + */
> >> + uint64_t min_timeout_ns;
> >> + /**< Minimum vector timeout configurable.
> >> + * @see
> >rte_event_eth_rx_adapter_event_vector_config::vector_timeout_ns
> >> + */
> >> + uint64_t max_timeout_ns;
> >> + /**< Maximum vector timeout configurable.
> >> + * @see
> >rte_event_eth_rx_adapter_event_vector_config::vector_timeout_ns
> >> + */
> >> +};
> >> +
> >> /**
> >> *
> >> * Callback function invoked by the SW adapter before it continues
> >> @@ -467,6 +527,51 @@ int
> >rte_event_eth_rx_adapter_cb_register(uint8_t id, uint16_t eth_dev_id,
> >>
> >rte_event_eth_rx_adapter_cb_fn cb_fn,
> >> void *cb_arg);
> >>
> >> +/**
> >> + * Retrieve vector limits for a given event dev and eth dev pair.
> >> + * @see rte_event_eth_rx_adapter_vector_limits
> >> + *
> >> + * @param dev_id
> >> + * Event device identifier.
> >> + * @param eth_port_id
> >> + * Port identifier of the ethernet device.
> >> + * @param [out] limits
> >> + * A pointer to rte_event_eth_rx_adapter_vector_limits structure
> >that has to
> >> + * be filled.
> >> + *
> >> + * @return
> >> + * - 0: Success.
> >> + * - <0: Error code on failure.
> >> + */
> >> +__rte_experimental
> >> +int rte_event_eth_rx_adapter_vector_limits_get(
> >> + uint8_t dev_id, uint16_t eth_port_id,
> >> + struct rte_event_eth_rx_adapter_vector_limits *limits);
> >> +
> >> +/**
> >> + * Configure event vectorization for a given ethernet device queue,
> >that has
> >> + * been added to a event eth Rx adapter.
> >> + *
> >> + * @param id
> >> + * The identifier of the ethernet Rx event adapter.
> >> + *
> >> + * @param eth_dev_id
> >> + * The identifier of the ethernet device.
> >> + *
> >> + * @param rx_queue_id
> >> + * Ethernet device receive queue index.
> >> + * If rx_queue_id is -1, then all Rx queues configured for the
> >ethernet device
> >> + * are configured with event vectorization.
> >> + *
> >> + * @return
> >> + * - 0: Success, Receive queue configured correctly.
> >> + * - <0: Error code on failure.
> >> + */
> >> +__rte_experimental
> >> +int rte_event_eth_rx_adapter_queue_event_vector_config(
> >> + uint8_t id, uint16_t eth_dev_id, int32_t rx_queue_id,
> >> + struct rte_event_eth_rx_adapter_event_vector_config
> >*config);
> >> +
> >> #ifdef __cplusplus
> >> }
> >> #endif
> >> diff --git a/lib/librte_eventdev/rte_eventdev.h
> >b/lib/librte_eventdev/rte_eventdev.h
> >> index aa4dd3959..678338247 100644
> >> --- a/lib/librte_eventdev/rte_eventdev.h
> >> +++ b/lib/librte_eventdev/rte_eventdev.h
> >> @@ -919,10 +919,28 @@ rte_event_dev_close(uint8_t dev_id);
> >> * Event vector structure.
> >> */
> >> struct rte_event_vector {
> >> - uint64_t nb_elem : 16;
> >> + uint16_t nb_elem;
> >> /**< Number of elements in this event vector. */
> >> - uint64_t rsvd : 48;
> >> + uint16_t rsvd : 15;
> >> /**< Reserved for future use */
> >> + uint16_t attr_valid : 1;
> >> + /**< Indicates that the below union attributes have valid
> >information.
> >> + */
> >> + union {
> >> + /* Used by Rx adapter.
> >> + * Indicates that all the elements in this vector belong to
> >the
> >> + * same port and queue pair when originating from Rx
> >adapter,
> >> + * valid only when event type is ETHDEV_VECTOR or
> >> + * ETH_RX_ADAPTER_VECTOR.
> >> + */
> >> + struct {
> >> + uint16_t port;
> >> + /* Ethernet device port id. */
> >> + uint16_t queue;
> >> + /* Ethernet device queue id. */
> >> + };
> >> + };
> >> + /**< Union to hold common attributes of the vector array. */
> >> uint64_t impl_opaque;
> >> /**< Implementation specific opaque value.
> >> * An implementation may use this field to hold implementation
> >specific
> >> @@ -1025,8 +1043,14 @@ struct rte_event_vector {
> >> * // Classify and handle event.
> >> * }
> >> */
> >> +#define RTE_EVENT_TYPE_ETHDEV_VECTOR
> >\
> >> + (RTE_EVENT_TYPE_VECTOR | RTE_EVENT_TYPE_ETHDEV)
> >> +/**< The event vector generated from ethdev subsystem */
> >> #define RTE_EVENT_TYPE_CPU_VECTOR (RTE_EVENT_TYPE_VECTOR
> >| RTE_EVENT_TYPE_CPU)
> >> /**< The event vector generated from cpu for pipelining. */
> >> +#define RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR
> >\
> >> + (RTE_EVENT_TYPE_VECTOR |
> >RTE_EVENT_TYPE_ETH_RX_ADAPTER)
> >> +/**< The event vector generated from eth Rx adapter. */
> >>
> >> #define RTE_EVENT_TYPE_MAX 0x10
> >> /**< Maximum number of event types */
> >> @@ -1171,6 +1195,8 @@ struct rte_event {
> >> * @see struct rte_event_eth_rx_adapter_queue_conf::ev
> >> * @see struct
> >rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
> >> */
> >> +#define RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR
> > 0x8
> >> +/**< Adapter supports event vectorization per ethdev. */
> >>
> >> /**
> >> * Retrieve the event device's ethdev Rx adapter capabilities for the
> >> diff --git a/lib/librte_eventdev/version.map
> >b/lib/librte_eventdev/version.map
> >> index a070ef56e..902df0ae3 100644
> >> --- a/lib/librte_eventdev/version.map
> >> +++ b/lib/librte_eventdev/version.map
> >> @@ -141,6 +141,8 @@ EXPERIMENTAL {
> >>
> >> #added in 21.05
> >> rte_event_vector_pool_create;
> >> + rte_event_eth_rx_adapter_vector_limits_get;
> >> + rte_event_eth_rx_adapter_queue_event_vector_config;
> >> };
> >>
> >> INTERNAL {
> >> --
> >> 2.17.1
> >
> >More of informational queries.
> >
> >Acked-by: Jay Jayatheerthan <jay.jayatheert...@intel.com>
