On Wed, 2021-03-24 at 14:48 +0530, Jerin Jacob wrote:
> On Mon, Mar 22, 2021 at 10:38 PM Igor Russkikh
> <irussk...@marvell.com> wrote:
> >
> >
> >
> > On 3/5/2021 2:13 PM, Balazs Nemeth wrote:
> > > External Email
> > >
> > > -----------------------------------------------------------------
> > > -----
> > > This patch set optimizes qede_{rx,tx}_entry and introduces
> > > rte_pktmbuf_free_bulk in qede_process_tx_compl. The overall
> > > performance
> > > improvement depends on the use-case; in a physical-virtual-
> > > physical test
> > > on a ThunderX2 99xx system with two SMT threads used in ovs,
> > > and two cores used in a vm, an improvement of around 2.55% is
> > > observed
> > > due to this patch set.
> > >
> > > Balazs Nemeth (8):
> > > net/qede: remove flags from qede_tx_entry and simplify to
> > > rte_mbuf
> > > net/qede: avoid repeatedly calling ecore_chain_get_cons_idx
> > > net/qede: assume txq->sw_tx_ring[idx] is never null in
> > > qede_free_tx_pkt
> > > net/qede: inline qede_free_tx_pkt to prepare for
> > > rte_pktmbuf_free_bulk
> > > net/qede: use rte_pktmbuf_free_bulk instead of rte_pktmbuf_free
> > > net/qede: prefetch txq->hw_cons_ptr
> > > net/qede: prefetch next packet to free
> > > net/qede: remove page_offset from struct qede_rx_entry and
> > > simplify
> > >
> > > drivers/net/qede/qede_rxtx.c | 148 +++++++++++++++++++----------
> > > ------
> > > drivers/net/qede/qede_rxtx.h | 21 +----
> > > 2 files changed, 81 insertions(+), 88 deletions(-)
> >
> > Series reviewed, for the series
> >
> > Acked-by: Igor Russkikh <irussk...@marvell.com>
> >
> > One checkpatch warn I see in patchwork output, probably worth
> > fixing:
> >
> > ERROR:POINTER_LOCATION: "(foo**)" should be "(foo **)"
> > #120: FILE: drivers/net/qede/qede_rxtx.c:56:
> > + ret = rte_mempool_get_bulk(rxq->mb_pool, (void**)&rxq-
> > >sw_rx_ring[idx], count);
>
>
> Hi @Balazs Nemeth
>
> Please fix the following checkpatc.shh and check-git-log.sh issues
> and
> add Igor reviewed by in next version.
> I will merge the next version with the fixes. Updaed this series
> status in the patchwork as "Changes requested"
>
Ok I will provide a new version next week. Thanks for the feedback!
>
> Wrong headline format:
> net/qede: remove flags from qede_tx_entry and simplify to
> rte_mbuf
> net/qede: avoid repeatedly calling ecore_chain_get_cons_idx
> net/qede: assume txq->sw_tx_ring[idx] is never null in
> qede_free_tx_pkt
> net/qede: inline qede_free_tx_pkt to prepare for
> rte_pktmbuf_free_bulk
> net/qede: use rte_pktmbuf_free_bulk instead of
> rte_pktmbuf_free
> net/qede: prefetch txq->hw_cons_ptr
> net/qede: remove page_offset from struct qede_rx_entry and
> simplify
> Headline too long:
> net/qede: remove flags from qede_tx_entry and simplify to
> rte_mbuf
> net/qede: assume txq->sw_tx_ring[idx] is never null in
> qede_free_tx_pkt
> net/qede: inline qede_free_tx_pkt to prepare for
> rte_pktmbuf_free_bulk
> net/qede: use rte_pktmbuf_free_bulk instead of
> rte_pktmbuf_free
> net/qede: remove page_offset from struct qede_rx_entry and
> simplify
>
> Invalid patch(es) found - checked 8 patches
> check-git-log failed
>
>
>
> ### net/qede: remove flags from qede_tx_entry and simplify to
> rte_mbuf
>
> WARNING:LONG_LINE: line length of 89 exceeds 80 columns
> #37: FILE: drivers/net/qede/qede_rxtx.c:429:
> + (sizeof(txq->sw_tx_ring)
> * txq->nb_tx_desc),
>
> total: 0 errors, 1 warnings, 0 checks, 87 lines checked
>
> ### net/qede: avoid repeatedly calling ecore_chain_get_cons_idx
>
> WARNING:BRACES: braces {} are not necessary for single statement
> blocks
> #82: FILE: drivers/net/qede/qede_rxtx.c:934:
> + while (remaining) {
> + remaining -= qede_free_tx_pkt(txq);
> + }
>
> total: 0 errors, 1 warnings, 0 checks, 67 lines checked
>
> ### net/qede: use rte_pktmbuf_free_bulk instead of rte_pktmbuf_free
>
> WARNING:LONG_LINE: line length of 89 exceeds 80 columns
> #48: FILE: drivers/net/qede/qede_rxtx.c:930:
> + rte_pktmbuf_free_bulk(&txq->sw_tx_ring[first_idx],
> mask - first_idx + 1);
>
> WARNING:LONG_LINE: line length of 84 exceeds 80 columns
> #51: FILE: drivers/net/qede/qede_rxtx.c:933:
> + rte_pktmbuf_free_bulk(&txq->sw_tx_ring[first_idx],
> idx
> - first_idx);
>
> total: 0 errors, 2 warnings, 0 checks, 32 lines checked
>
> ### net/qede: prefetch next packet to free
>
> WARNING:REPEATED_WORD: Possible repeated word: 'next'
> #6:
> While handling the current mbuf, pull the next next mbuf into the
> cache.
>
> WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
> #21: FILE: drivers/net/qede/qede_rxtx.c:919:
> + /* Prefetch the next mbuf. Note that at least the
> last 4 mbufs
> + that are prefetched will not be used in the
> current call. */
>
> WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a
> separate line
> #21: FILE: drivers/net/qede/qede_rxtx.c:919:
> + that are prefetched will not be used in the
> current call. */
>
> total: 0 errors, 3 warnings, 0 checks, 11 lines checked
>
> ### net/qede: remove page_offset from struct qede_rx_entry and
> simplify
>
> WARNING:LONG_LINE: line length of 87 exceeds 80 columns
> #49: FILE: drivers/net/qede/qede_rxtx.c:56:
> + ret = rte_mempool_get_bulk(rxq->mb_pool,
> (void**)&rxq->sw_rx_ring[idx], count);
>
> ERROR:POINTER_LOCATION: "(foo**)" should be "(foo **)"
> #49: FILE: drivers/net/qede/qede_rxtx.c:56:
> + ret = rte_mempool_get_bulk(rxq->mb_pool,
> (void**)&rxq->sw_rx_ring[idx], count);
>
> total: 1 errors, 1 warnings, 0 checks, 174 lines checked
>
>
>
> >
> > Thanks
> > Igor
>
Regards,
Balazs
