Hi, Konstantin, Helin,
there is a documented limitation of xl710 controllers (i40e driver)
which is not handled in any way by a DPDK driver.
From the datasheet chapter 8.4.1:
"? A single transmit packet may span up to 8 buffers (up to 8 data descriptors
per packet including
both the header and payload buffers).
? The total number of data descriptors for the whole TSO (explained later on in
this chapter) is
unlimited as long as each segment within the TSO obeys the previous rule (up to
8 data descriptors
per segment for both the TSO header and the segment payload buffers)."
This means that, for instance, long cluster with small fragments has to
be linearized before it may be placed on the HW ring.
In more standard environments like Linux or FreeBSD drivers the solution
is straight forward - call skb_linearize()/m_collapse() corresponding.
In the non-conformist environment like DPDK life is not that easy -
there is no easy way to collapse the cluster into a linear buffer from
inside the device driver
since device driver doesn't allocate memory in a fast path and utilizes
the user allocated pools only.
Here are two proposals for a solution:
1. We may provide a callback that would return a user TRUE if a give
cluster has to be linearized and it should always be called before
rte_eth_tx_burst(). Alternatively it may be called from inside the
rte_eth_tx_burst() and rte_eth_tx_burst() is changed to return some
error code for a case when one of the clusters it's given has to be
linearized.
2. Another option is to allocate a mempool in the driver with the
elements consuming a single page each (standard 2KB buffers would
do). Number of elements in the pool should be as Tx ring length
multiplied by "64KB/(linear data length of the buffer in the pool
above)". Here I use 64KB as a maximum packet length and not taking
into an account esoteric things like "Giant" TSO mentioned in the
spec above. Then we may actually go and linearize the cluster if
needed on top of the buffers from the pool above, post the buffer
from the mempool above on the HW ring, link the original cluster to
that new cluster (using the private data) and release it when the
send is done.
The first is a change in the API and would require from the application
some additional handling (linearization). The second would require some
additional memory but would keep all dirty details inside the driver and
would leave the rest of the code intact.
Pls., comment.
thanks,
vlad
