From: Huisong Li <lihuis...@huawei.com>
Currently, 'nb_fwd_lcores' value are both adjusted based on
'nb_fwd_streams' in rss/simple/icmp_echo_fwd_config_setup. But the
operation is lack for dcb_fwd_config_setup, which may lead to a
bad events where multiple polling threads operate on the same
queue. As a result, various possible exceptions will occur. The
procedure is as follows:
startup testpmd app as follows:
testpmd> port stop all
testpmd> set nbcore 8
testpmd> port config 0 dcb vt off 4 pfc on
testpmd> port config all rxq 16
testpmd> port config all txq 16
testpmd> port start all
testpmd> set fwd mac
Logical Core 1 (socket 0) forwards packets on 4 streams:
RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
Logical Core 2 (socket 0) forwards packets on 4 streams:
RX P=0/Q=4 (socket 0) -> TX P=0/Q=4 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=5 (socket 0) -> TX P=0/Q=5 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=6 (socket 0) -> TX P=0/Q=6 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=7 (socket 0) -> TX P=0/Q=7 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 4 streams:
RX P=0/Q=8 (socket 0) -> TX P=0/Q=8 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=9 (socket 0) -> TX P=0/Q=9 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=10 (socket 0) -> TX P=0/Q=10 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=11 (socket 0) -> TX P=0/Q=11 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 4 streams:
RX P=0/Q=12 (socket 0) -> TX P=0/Q=12 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=13 (socket 0) -> TX P=0/Q=13 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=14 (socket 0) -> TX P=0/Q=14 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=15 (socket 0) -> TX P=0/Q=15 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 1 streams:
RX P=0/Q=4 (socket 0) -> TX P=0/Q=4 (socket 0) peer=02:00:00:00:00:00
Logical Core 6 (socket 0) forwards packets on 1 streams:
RX P=0/Q=5 (socket 0) -> TX P=0/Q=5 (socket 0) peer=02:00:00:00:00:00
Logical Core 7 (socket 0) forwards packets on 1 streams:
RX P=0/Q=6 (socket 0) -> TX P=0/Q=6 (socket 0) peer=02:00:00:00:00:00
Logical Core 8 (socket 0) forwards packets on 1 streams:
RX P=0/Q=7 (socket 0) -> TX P=0/Q=7 (socket 0) peer=02:00:00:00:00:00
Notice: number of rxq and txq in running cmdline are greater than
used nb_tc.
For the DCB forwarding test, each core is assigned on each traffic class
and each core is assigned a multi-stream. Therefore, 'nb_fwd_lcores'
value can be adjusted based on 'total_tc_num' in all forwarding ports.
In addition, after operation of port stop/port start, forwarding
configuration is changed by rss_fwd_config_setup. In "start_port"
function, dcb_test is set to 1 based on dcb_config. So it also
should be cleared when dcb_config is 0.
Fixes: 900550de04a7 ("app/testpmd: add dcb support")
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Cc: sta...@dpdk.org
Signed-off-by: Huisong Li <lihuis...@huawei.com>
Signed-off-by: Lijun Ou <ouli...@huawei.com>
---
app/test-pmd/config.c | 19 +++++++++++++++++++
app/test-pmd/testpmd.c | 12 +++++++-----
2 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 576d5ac..c89f8cd 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2864,6 +2864,21 @@ rss_fwd_config_setup(void)
}
}
+static uint16_t
+get_fwd_port_total_tc_num(void)
+{
+ struct rte_eth_dcb_info dcb_info;
+ uint16_t total_tc_num = 0;
+ unsigned int i;
+
+ for (i = 0; i < nb_fwd_ports; i++) {
+ (void)rte_eth_dev_get_dcb_info(fwd_ports_ids[i], &dcb_info);
+ total_tc_num += dcb_info.nb_tcs;
+ }
+
+ return total_tc_num;
+}
+
/**
* For the DCB forwarding test, each core is assigned on each traffic class.
*
@@ -2883,12 +2898,16 @@ dcb_fwd_config_setup(void)
lcoreid_t lc_id;
uint16_t nb_rx_queue, nb_tx_queue;
uint16_t i, j, k, sm_id = 0;
+ uint16_t total_tc_num = 0;
uint8_t tc = 0;
cur_fwd_config.nb_fwd_lcores = (lcoreid_t) nb_fwd_lcores;
cur_fwd_config.nb_fwd_ports = nb_fwd_ports;
cur_fwd_config.nb_fwd_streams =
(streamid_t) (nb_rxq * cur_fwd_config.nb_fwd_ports);
+ total_tc_num = get_fwd_port_total_tc_num();
+ if (cur_fwd_config.nb_fwd_lcores > total_tc_num)
+ cur_fwd_config.nb_fwd_lcores = total_tc_num;
/* reinitialize forwarding streams */
init_fwd_streams();
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 1a57324..7eb810b 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2707,14 +2707,16 @@ stop_port(portid_t pid)
portid_t peer_pl[RTE_MAX_ETHPORTS];
int peer_pi;
- if (dcb_test) {
- dcb_test = 0;
- dcb_config = 0;
- }
-
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
+ /*
+ * In "start_port" function, dcb_test is set to 1 based on dcb_config.
+ * So it should be cleared when dcb_config is 0.
+ */
+ if (dcb_config == 0)
+ dcb_test = 0;
+
printf("Stopping ports...\n");
RTE_ETH_FOREACH_DEV(pi) {
--
2.7.4
