Hi Morten,
Thank you for your comments.
It is packet count instead of frames count.
So 4K TCP packet should be handle as one instead of 3 Ethernet Frames.
We will update the struct as below:
enum rte_mtr_algorithm {
......
/** Single Rate Three Color Marker, Packet based (srTCMp).
* - - similar to IETF RFC 2697 but rate is packet per second.
*/
RTE_MTR_SRTCMP,
}
struct rte_mtr_meter_profile {
......
/** Items only valid when *alg* is set to srTCMp. */
struct {
/** Committed Information Rate (CIR)
* (packets/second).
*/
uint64_t cir;
/** Committed Burst Size (CBS) (packets). */
uint64_t cbs;
/** Excess Burst Size (EBS) (packets). */
uint64_t ebs;
} srtcmp;
}
Regards,
Li Zhang
> -----Original Message-----
> From: dev <dev-boun...@dpdk.org> On Behalf Of Morten Br?rup
> Sent: Tuesday, February 23, 2021 4:25 PM
> To: Li Zhang <l...@nvidia.com>; Ferruh Yigit <ferruh.yi...@intel.com>; Dekel
> Peled <dek...@nvidia.com>; Ori Kam <or...@nvidia.com>; Slava Ovsiienko
> <viachesl...@nvidia.com>; Matan Azrad <ma...@nvidia.com>; Dumitrescu,
> Cristian <cristian.dumitre...@intel.com>
> Cc: dev@dpdk.org; NBU-Contact-Thomas Monjalon <tho...@monjalon.net>;
> Raslan Darawsheh <rasl...@nvidia.com>
> Subject: Re: [dpdk-dev] [PATCH] [RFC, v2]: adds support PPS(packet per second)
> on meter
>
> > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Li Zhang
> > Sent: Tuesday, February 23, 2021 3:07 AM
> >
> > Thanks for your comments.
> > We changed the struct as below:
> > struct rte_mtr_meter_profile {
> > ......
> > /** Items only valid when alg is set to sprTCM. */
> > struct {
> > /** Committed Information Packet Rate (CIPR). */
> > uint64_t cipr;
> >
> > /** Committed Packet Burst Size (CPBS). */
> > uint64_t cpbs;
> >
> > /** Excess Packet Burst Size (EPBS). */
> > uint64_t epbs;
> > } sprtcm;
> > }
>
> That is certainly not an improvement! Please stick with the broadly accepted
> industry standard names (CIR, CBS, EBS, etc.). Newly invented names like CIPR
> will only cause confusion. Please note that CIR, CBS, EBS don't say anything
> about their units; it could be bytes, packets, cells, frames, messages or
> anything else. So it is perfectly natural using the same names for packets
> instead of bytes.
>
> I propose the following modifications instead.
>
> For the algorithm, keep the "Single Rate Three Color Marker" name mentioned
> in the RFCs, but indicate that the variant is packet based:
>
> /** Single Rate Three Color Marker, Packet based (srTCMp). */
> RTE_MTR_SRTCMP,
>
> Or if you prefer the packet based indicator at the front instead:
>
> /** Packet based Single Rate Three Color Marker (psrTCM). */
> RTE_MTR_PSRTCM,
>
> And for the meter profile, keep the industry standard names, but update the
> descriptions:
>
> /** Items only valid when *alg* is set to srTCMp. */
> struct {
> /** Committed Information Rate (CIR)
> (packets/second). */
> uint64_t cir;
>
> /** Committed Burst Size (CBS) (packets). */
> uint64_t cbs;
>
> /** Excess Burst Size (EBS) (packets). */
> uint64_t ebs;
> } srtcmp;
>
>
> Come to think of it: Is the unit packets, or is it actually Ethernet frames?
> In
> other words: Does a 4 KB TCP packet that the NIC's offload function chops up
> into three Ethernet frames count as one or three in this algorithm?
>
>
> Med venlig hilsen / kind regards
> - Morten Brørup
>
> >
> > Regards,
> > Li Zhang
> > > -----Original Message-----
> > > From: dev <dev-boun...@dpdk.org> On Behalf Of Morten Br?rup
> > > Sent: Friday, February 12, 2021 3:41 PM
> > > To: Ferruh Yigit <ferruh.yi...@intel.com>; Li Zhang
> > <l...@nvidia.com>; Dekel
> > > Peled <dek...@nvidia.com>; Ori Kam <or...@nvidia.com>; Slava
> > Ovsiienko
> > > <viachesl...@nvidia.com>; Matan Azrad <ma...@nvidia.com>;
> > > Dumitrescu, Cristian <cristian.dumitre...@intel.com>
> > > Cc: dev@dpdk.org; NBU-Contact-Thomas Monjalon
> <tho...@monjalon.net>;
> > > Raslan Darawsheh <rasl...@nvidia.com>
> > > Subject: Re: [dpdk-dev] [PATCH] [RFC, v2]: adds support PPS(packet
> > per second)
> > > on meter
> > >
> > > > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Ferruh Yigit
> > > > Sent: Thursday, January 28, 2021 7:28 PM
> > > >
> > > > On 1/25/2021 1:20 AM, Li Zhang wrote:
> > > > > Currently the flow Meter algorithms in rte_flow only supports
> > bytes
> > > > > per second(BPS).
> > > > > Such as Single Rate Three Color Marker (srTCM rfc2697) This RFC
> > adds
> > > > > the packet per second definition in Meter algorithms structure,
> > to
> > > > > support the rte_mtr APIs with type srTCM pps mode.
> > > > > The below structure will be extended:
> > > > > rte_mtr_algorithm
> > > > > rte_mtr_meter_profile
> > > > > Signed-off-by: Li Zhang <l...@nvidia.com>
> > > >
> > > > cc'ed Cristian for review/comment.
> > > >
> > > > > ---
> > > > > lib/librte_ethdev/rte_mtr.h | 28 ++++++++++++++++++++++++++++
> > > > > 1 file changed, 28 insertions(+)
> > > > >
> > > > > diff --git a/lib/librte_ethdev/rte_mtr.h
> > > > b/lib/librte_ethdev/rte_mtr.h
> > > > > index 916a09c5c3..3e88904faf 100644
> > > > > --- a/lib/librte_ethdev/rte_mtr.h
> > > > > +++ b/lib/librte_ethdev/rte_mtr.h
> > > > > @@ -119,6 +119,9 @@ enum rte_mtr_algorithm {
> > > > >
> > > > > /** Two Rate Three Color Marker (trTCM) - IETF RFC 4115. */
> > > > > RTE_MTR_TRTCM_RFC4115,
> > > > > +
> > > > > + /** Single Rate Three Color Marker (srTCM) in Packet per
> > second
> > > > mode */
> > > > > + RTE_MTR_SRTCM_PPS,
> > > > > };
> > > > >
> > > > > /**
> > > > > @@ -171,6 +174,18 @@ struct rte_mtr_meter_profile {
> > > > > /** Excess Burst Size (EBS) (bytes). */
> > > > > uint64_t ebs;
> > > > > } trtcm_rfc4115;
> > > > > +
> > > > > + /** Items only valid when *alg* is set to srTCM -
> > PPS. */
> > > > > + struct {
> > > > > + /** Committed Information Rate
> > > (CIR)(packets/second).
> > > > */
> > > > > + uint64_t cir;
> > > > > +
> > > > > + /** Committed Burst Size (CBS) (bytes). */
> > > > > + uint64_t cbs;
> > > > > +
> > > > > + /** Excess Burst Size (EBS) (bytes). */
> > > > > + uint64_t ebs;
> > > > > + } srtcm_pps;
> > >
> > > In PPS mode, the burst sizes (ebs, ebs) must be packets, not bytes.
> > >
> > > > > };
> > > > > };
> > > > >
> > > > > @@ -317,6 +332,13 @@ struct rte_mtr_capabilities {
> > > > > */
> > > > > uint32_t meter_trtcm_rfc4115_n_max;
> > > > >
> > > > > + /** Maximum number of MTR objects that can have their
> meter
> > > > configured
> > > > > + * to run the srTCM packet per second algorithm. The value
> > of 0
> > > > > + * indicates this metering algorithm is not supported.
> > > > > + * The maximum value is *n_max*.
> > > > > + */
> > > > > + uint32_t meter_srtcm_pps_n_max;
> > > > > +
> > > > > /** Maximum traffic rate that can be metered by a single
> > MTR
> > > > object. For
> > > > > * srTCM RFC 2697, this is the maximum CIR rate. For trTCM
> > RFC
> > > > 2698,
> > > > > * this is the maximum PIR rate. For trTCM RFC 4115, this
> > is the
> > > > maximum
> > > > > @@ -342,6 +364,12 @@ struct rte_mtr_capabilities {
> > > > > */
> > > > > int color_aware_trtcm_rfc4115_supported;
> > > > >
> > > > > + /**
> > > > > + * When non-zero, it indicates that color aware mode is
> > supported
> > > > for
> > > > > + * the srTCM packet per second metering algorithm.
> > >
> > > No need for two spaces between the words second and metering.
> > >
> > > > > + */
> > > > > + int color_aware_srtcm_pps_supported;
> > > > > +
> > > > > /** When non-zero, it indicates that the policer packet
> > recolor
> > > > actions
> > > > > * are supported.
> > > > > * @see enum rte_mtr_policer_action
> > > > >
> > > >
