Hi Beilei,
> -----Original Message-----
> From: Xing, Beilei <beilei.x...@intel.com>
> Sent: Friday, January 29, 2021 11:34 AM
> To: Zhang, AlvinX <alvinx.zh...@intel.com>; Guo, Jia <jia....@intel.com>;
> Zhang, Qi Z <qi.z.zh...@intel.com>
> Cc: dev@dpdk.org
> Subject: RE: [PATCH] net/i40e: fix X722 FDIR field mask
>
>
>
> > -----Original Message-----
> > From: Zhang,Alvin <alvinx.zh...@intel.com>
> > Sent: Friday, January 29, 2021 10:09 AM
> > To: Guo, Jia <jia....@intel.com>; Xing, Beilei
> > <beilei.x...@intel.com>; Zhang, Qi Z <qi.z.zh...@intel.com>
> > Cc: dev@dpdk.org
> > Subject: [PATCH] net/i40e: fix X722 FDIR field mask
> >
> > From: Alvin Zhang <alvinx.zh...@intel.com>
> >
> > The absolute field offsets of IPv4 or IPv6 header are related to
> > hardware configuration. The X710 and X722 have different hardware
> > configurations, and users can even modify the hardware configuration.
> > Therefore, The default values cannot be used when calculating mask offset.
> >
> > commands and packets as below:
> > flow create 0 ingress pattern eth / ipv4 proto is 255 / end
> > actions queue index 2 / end
> > pkt = Ether()/IP(ttl=63, proto=255)/Raw('X'*40)
> >
> > flow create 0 ingress pattern eth / ipv4 tos is 50 / udp / end
> > actions queue index 2 / end
> > pkt = Ether()/IP(tos=50)/UDP()/Raw('X'*40)
> >
> > flow create 0 ingress pattern eth / ipv6 tc is 12 / udp / end
> > actions queue index 3 / end
> > pkt = Ether()/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw('X'*40)
> >
> > flow create 0 ingress pattern eth / ipv6 hop is 34 / end actions
> > queue index 3 / end
> > pkt = Ether()/IPv6(tc=12,hlim=34,fl=0x98765)/Raw('X'*40)
>
> Not very clear about the issue, the above flows will fail to be created with
> X722?
> And you fix is for FDIR, does RSS have similar issue?
Above flows created succeed, but they can not take effect.
>
> Beilei
>
