Hi Huawei,
Nice work, just some small comments.
>-----Original Message-----
>From: dev <dev-boun...@dpdk.org> On Behalf Of 谢华伟(此时此刻）
>Sent: Thursday, October 22, 2020 11:51 PM
>To: ferruh.yi...@intel.com
>Cc: dev@dpdk.org; maxime.coque...@redhat.com;
>anatoly.bura...@intel.com; david.march...@redhat.com;
>zhihong.w...@intel.com; chenbo....@intel.com; gr...@u256.net; 谢华伟(此
>时此刻） <huawei....@alibaba-inc.com>
>Subject: [dpdk-dev] [PATCH v5 2/3] PCI: support MMIO in
>rte_pci_ioport_map/unap/read/write
>
>From: "huawei.xhw" <huawei....@alibaba-inc.com>
>
>If IO BAR, we get PIO address.
>If MMIO BAR, we get mapped virtual address.
>We distinguish PIO and MMIO by their address like how kernel does.
>ioread/write8/16/32 is provided to access PIO/MMIO.
>BTW, for virtio on arch other than x86, BAR flag indicates PIO but is mapped.
>
>Signed-off-by: huawei.xhw <huawei....@alibaba-inc.com>
>---
> drivers/bus/pci/linux/pci.c | 4 --
> drivers/bus/pci/linux/pci_uio.c | 123 ++++++++++++++++++++++++++-----------
>---
> 2 files changed, 82 insertions(+), 45 deletions(-)
>
>diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c index
>0f38abf..0dc99e9 100644
>--- a/drivers/bus/pci/linux/pci.c
>+++ b/drivers/bus/pci/linux/pci.c
>@@ -715,8 +715,6 @@ int rte_pci_write_config(const struct rte_pci_device
>*device,
> break;
> #endif
> case RTE_PCI_KDRV_IGB_UIO:
>- pci_uio_ioport_read(p, data, len, offset);
>- break;
> case RTE_PCI_KDRV_UIO_GENERIC:
> pci_uio_ioport_read(p, data, len, offset);
> break;
>@@ -736,8 +734,6 @@ int rte_pci_write_config(const struct rte_pci_device
>*device,
> break;
> #endif
> case RTE_PCI_KDRV_IGB_UIO:
>- pci_uio_ioport_write(p, data, len, offset);
>- break;
> case RTE_PCI_KDRV_UIO_GENERIC:
> pci_uio_ioport_write(p, data, len, offset);
> break;
>diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
>index 01f2a40..c19382f 100644
>--- a/drivers/bus/pci/linux/pci_uio.c
>+++ b/drivers/bus/pci/linux/pci_uio.c
>@@ -379,14 +379,9 @@
> char buf[BUFSIZ];
> uint64_t phys_addr, end_addr, flags;
> unsigned long base;
>+ bool iobar;
> int i;
>
>- if (rte_eal_iopl_init() != 0) {
>- RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for
>PCI device %s\n",
>- __func__, dev->name);
>- return -1;
>- }
>-
> /* open and read addresses of the corresponding resource in sysfs */
> snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
> rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
>@@ -408,15 +403,30 @@
> &end_addr, &flags) < 0)
> goto error;
>
>- if (!(flags & IORESOURCE_IO)) {
>- RTE_LOG(ERR, EAL, "%s(): bar resource other than IO is not
>supported\n", __func__);
>+ if (flags & IORESOURCE_IO) {
>+ iobar = 1;
>+ base = (unsigned long)phys_addr;
>+ RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n",
>__func__, base);
>+ } else if (flags & IORESOURCE_MEM) {
>+ iobar = 0;
>+ base = (unsigned long)dev->mem_resource[bar].addr;
>+ RTE_LOG(INFO, EAL, "%s(): MMIO BAR %08lx detected\n",
>__func__, base);
Same here, INFO level seems chatty.
>+ } else {
>+ RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
>+ goto error;
>+ }
>+
>+
>+ if (iobar && rte_eal_iopl_init() != 0) {
>+ RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for
>PCI device %s\n",
>+ __func__, dev->name);
> goto error;
> }
Same as Maxime's suggestion, please move this block as well.
>- base = (unsigned long)phys_addr;
>- RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__,
>base);
>
>- if (base > UINT16_MAX)
>+ if (iobar && (base > UINT16_MAX)) {
PIO_MAX defined below, please use it here. UNI16_MAX used in patch 1/3 as well.
>+ RTE_LOG(ERR, EAL, "%s(): %08lx too large PIO resource\n",
>__func__,
>+base);
> goto error;
>+ }
>
> /* FIXME only for primary process ? */
> if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) { @@ -
>517,6 +527,61 @@ } #endif
>
>+#define PIO_MAX 0x10000
>+static inline uint8_t ioread8(void *addr) {
>+ uint8_t val;
>+
>+ val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>+ *(volatile uint8_t *)addr :
>+ inb((unsigned long)addr);
>+
>+ return val;
>+}
>+
>+static inline uint16_t ioread16(void *addr) {
>+ uint16_t val;
>+
>+ val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>+ *(volatile uint16_t *)addr :
>+ inw((unsigned long)addr);
>+
>+ return val;
>+}
>+
>+static inline uint32_t ioread32(void *addr) {
>+ uint32_t val;
>+
>+ val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>+ *(volatile uint32_t *)addr :
>+ inl((unsigned long)addr);
>+
>+ return val;
>+}
>+
>+static inline void iowrite8(uint8_t val, void *addr) {
>+ (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>+ *(volatile uint8_t *)addr = val :
>+ outb(val, (unsigned long)addr);
>+}
>+
>+static inline void iowrite16(uint16_t val, void *addr) {
>+ (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>+ *(volatile uint16_t *)addr = val :
>+ outw(val, (unsigned long)addr);
>+}
>+
>+static inline void iowrite32(uint32_t val, void *addr) {
>+ (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>+ *(volatile uint32_t *)addr = val :
>+ outl(val, (unsigned long)addr);
>+}
>+
> void
> pci_uio_ioport_read(struct rte_pci_ioport *p,
> void *data, size_t len, off_t offset) @@ -528,25 +593,13
>@@
> for (d = data; len > 0; d += size, reg += size, len -= size) {
> if (len >= 4) {
> size = 4;
>-#if defined(RTE_ARCH_X86)
>- *(uint32_t *)d = inl(reg);
>-#else
>- *(uint32_t *)d = *(volatile uint32_t *)reg;
>-#endif
>+ *(uint32_t *)d = ioread32((void *)reg);
> } else if (len >= 2) {
> size = 2;
>-#if defined(RTE_ARCH_X86)
>- *(uint16_t *)d = inw(reg);
>-#else
>- *(uint16_t *)d = *(volatile uint16_t *)reg;
>-#endif
>+ *(uint16_t *)d = ioread16((void *)reg);
> } else {
> size = 1;
>-#if defined(RTE_ARCH_X86)
>- *d = inb(reg);
>-#else
>- *d = *(volatile uint8_t *)reg;
>-#endif
>+ *d = ioread8((void *)reg);
> }
> }
> }
>@@ -562,25 +615,13 @@
> for (s = data; len > 0; s += size, reg += size, len -= size) {
> if (len >= 4) {
> size = 4;
>-#if defined(RTE_ARCH_X86)
>- outl_p(*(const uint32_t *)s, reg);
>-#else
>- *(volatile uint32_t *)reg = *(const uint32_t *)s;
>-#endif
>+ iowrite32(*(const uint32_t *)s, (void *)reg);
> } else if (len >= 2) {
> size = 2;
>-#if defined(RTE_ARCH_X86)
>- outw_p(*(const uint16_t *)s, reg);
>-#else
>- *(volatile uint16_t *)reg = *(const uint16_t *)s;
>-#endif
>+ iowrite16(*(const uint16_t *)s, (void *)reg);
> } else {
> size = 1;
>-#if defined(RTE_ARCH_X86)
>- outb_p(*s, reg);
>-#else
>- *(volatile uint8_t *)reg = *s;
>-#endif
>+ iowrite8(*s, (void *)reg);
> }
> }
> }
>--
>1.8.3.1
