On Thu, Jan 21, 2021 at 10:27 AM Lance Richardson
<lance.richard...@broadcom.com> wrote:
>
> On Mon, Jan 18, 2021 at 2:08 AM Steve Yang <stevex.y...@intel.com> wrote:
> >
> > When the max rx packet length is smaller than the sum of mtu size and
> > ether overhead size, it should be enlarged, otherwise the VLAN packets
> > will be dropped.
> >
> > Removed the rx_offloads assignment for jumbo frame during command line
> > parsing, and set the correct jumbo frame flag if MTU size is larger than
> > the default value 'RTE_ETHER_MTU' within 'init_config()'.
> >
> > Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
> > Fixes: 35b2d13fd6fd ("net: add rte prefix to ether defines")
> > Fixes: ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
> > Fixes: 150c9ac2df13 ("app/testpmd: update Rx offload after setting MTU")
> >
> > Cc: Wenzhuo Lu <wenzhuo...@intel.com>
> > Cc: Beilei Xing <beilei.x...@intel.com>
> > Cc: Bernard Iremonger <bernard.iremon...@intel.com>
> >
> > Signed-off-by: Steve Yang <stevex.y...@intel.com>
> > ---
> >  app/test-pmd/cmdline.c    |  6 ------
> >  app/test-pmd/config.c     |  2 +-
> >  app/test-pmd/parameters.c |  7 ++-----
> >  app/test-pmd/testpmd.c    | 18 ++++++++++++++++++
> >  4 files changed, 21 insertions(+), 12 deletions(-)
> >
> > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> > index 2ccbaa039e..65042fcff5 100644
> > --- a/app/test-pmd/cmdline.c
> > +++ b/app/test-pmd/cmdline.c
> > @@ -1886,7 +1886,6 @@ cmd_config_max_pkt_len_parsed(void *parsed_result,
> >
> >         RTE_ETH_FOREACH_DEV(pid) {
> >                 struct rte_port *port = &ports[pid];
> > -               uint64_t rx_offloads = port->dev_conf.rxmode.offloads;
> >
> >                 if (!strcmp(res->name, "max-pkt-len")) {
> >                         if (res->value < RTE_ETHER_MIN_LEN) {
> > @@ -1898,11 +1897,6 @@ cmd_config_max_pkt_len_parsed(void *parsed_result,
> >                                 return;
> >
> >                         port->dev_conf.rxmode.max_rx_pkt_len = res->value;
> > -                       if (res->value > RTE_ETHER_MAX_LEN)
> > -                               rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
> > -                       else
> > -                               rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
> > -                       port->dev_conf.rxmode.offloads = rx_offloads;
> >                 } else {
> >                         printf("Unknown parameter\n");
> >                         return;
> > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> > index 3f6c8642b1..1195f054f3 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -1434,7 +1434,7 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
> >                  * device supports jumbo frame.
> >                  */
> >                 eth_overhead = dev_info.max_rx_pktlen - dev_info.max_mtu;
> > -               if (mtu > RTE_ETHER_MAX_LEN - eth_overhead) {
> > +               if (mtu > RTE_ETHER_MTU) {
> >                         rte_port->dev_conf.rxmode.offloads |=
> >                                                 DEV_RX_OFFLOAD_JUMBO_FRAME;
> >                         rte_port->dev_conf.rxmode.max_rx_pkt_len =
> > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > index 414a0068fb..df5eb10d84 100644
> > --- a/app/test-pmd/parameters.c
> > +++ b/app/test-pmd/parameters.c
> > @@ -834,12 +834,9 @@ launch_args_parse(int argc, char** argv)
> >                         }
> >                         if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
> >                                 n = atoi(optarg);
> > -                               if (n >= RTE_ETHER_MIN_LEN) {
> > +                               if (n >= RTE_ETHER_MIN_LEN)
> >                                         rx_mode.max_rx_pkt_len = (uint32_t) 
> > n;
> > -                                       if (n > RTE_ETHER_MAX_LEN)
> > -                                               rx_offloads |=
> > -                                                       
> > DEV_RX_OFFLOAD_JUMBO_FRAME;
> > -                               } else
> > +                               else
> >                                         rte_exit(EXIT_FAILURE,
> >                                                  "Invalid max-pkt-len=%d - 
> > should be > %d\n",
> >                                                  n, RTE_ETHER_MIN_LEN);
> > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> > index 2b60f6c5d3..c256e719ae 100644
> > --- a/app/test-pmd/testpmd.c
> > +++ b/app/test-pmd/testpmd.c
> > @@ -1410,6 +1410,7 @@ init_config(void)
> >         struct rte_gro_param gro_param;
> >         uint32_t gso_types;
> >         uint16_t data_size;
> > +       uint16_t eth_overhead;
> >         bool warning = 0;
> >         int k;
> >         int ret;
> > @@ -1446,6 +1447,23 @@ init_config(void)
> >                         rte_exit(EXIT_FAILURE,
> >                                  "rte_eth_dev_info_get() failed\n");
> >
> > +               /* Update the max_rx_pkt_len to have MTU as RTE_ETHER_MTU */
> > +               if (port->dev_info.max_mtu != UINT16_MAX &&
> > +                   port->dev_info.max_rx_pktlen > port->dev_info.max_mtu)
> > +                       eth_overhead = port->dev_info.max_rx_pktlen -
> > +                               port->dev_info.max_mtu;
> > +               else
> > +                       eth_overhead =
> > +                               RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
> > +
> > +               if (port->dev_conf.rxmode.max_rx_pkt_len <=
> > +                       (uint32_t)(RTE_ETHER_MTU + eth_overhead))
> > +                       port->dev_conf.rxmode.max_rx_pkt_len =
> > +                                       RTE_ETHER_MTU + eth_overhead;
> > +               else
> > +                       port->dev_conf.rxmode.offloads |=
> > +                                       DEV_RX_OFFLOAD_JUMBO_FRAME;
> > +
> >                 if (!(port->dev_info.tx_offload_capa &
> >                       DEV_TX_OFFLOAD_MBUF_FAST_FREE))
> >                         port->dev_conf.txmode.offloads &=
> > --
> > 2.17.1
> >
>
> Moving the setting of DEV_RX_OFFLOAD_JUMBO_FRAME from
> cmd_config_max_pkt_len_parsed() to init_config() doesn't seem to
> be correct for the case where max_rx_pkt_len is changed from the
> command line via "port config all max-pkt-len".
>
> The init_config() function is only called when testpmd is started,
> but the DEV_RX_OFFLOAD_JUMBO_FRAME setting needs to
> be recomputed whenever max_rx_pkt_len changes.
>
> (Of course this won't matter when DEV_RX_OFFLOAD_JUMBO_FRAME
> is removed, which seems like a great idea, but for now this is impacting
> some test automation with 21.02-rc1.)

+Ferruh (sorry, thought he was already on this thread.)

Reply via email to