While there's the modify action and sample action with ratio=1
in the E-Switch flow, and modify action is after the sample
action, means that the modify should only impact on after sample.
MLX5 PMD will monitor the above case and split the E-Switch flow
into two sub flows, similar as sample flow did before:
- the prefix sub flow with all actions preceding the sample and the
sample action itself, also append the new jump action after sample
in the prefix sub flow;
- the suffix sub flow with the modify action and other actions
following the sample action.
The flow split as below:
Original flow: items / actions pre / sample / modify / actions sfx
prefix sub flow -
items / actions pre / set_tag action / sample / jump
suffix sub flow -
tag_item / modify / actions sfx
Signed-off-by: Jiawei Wang <jiaw...@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viachesl...@nvidia.com>
---
drivers/net/mlx5/mlx5_flow.c | 175 ++++++++++++++++++++++++++++------------
drivers/net/mlx5/mlx5_flow_dv.c | 10 ---
2 files changed, 123 insertions(+), 62 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 055474b..df79318 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -4490,6 +4490,8 @@ struct mlx5_hlist_entry *
* Pointer to the position of the matched action if exists, otherwise is -1.
* @param[out] qrss_action_pos
* Pointer to the position of the Queue/RSS action if exists, otherwise is
-1.
+ * @param[out] modify_after_mirror
+ * Pointer to the flag of modify action after FDB mirroring.
*
* @return
* > 0 the total number of actions.
@@ -4499,13 +4501,15 @@ struct mlx5_hlist_entry *
flow_check_match_action(const struct rte_flow_action actions[],
const struct rte_flow_attr *attr,
enum rte_flow_action_type action,
- int *match_action_pos, int *qrss_action_pos)
+ int *match_action_pos, int *qrss_action_pos,
+ int *modify_after_mirror)
{
const struct rte_flow_action_sample *sample;
int actions_n = 0;
uint32_t ratio = 0;
int sub_type = 0;
int flag = 0;
+ int fdb_mirror = 0;
*match_action_pos = -1;
*qrss_action_pos = -1;
@@ -4514,25 +4518,53 @@ struct mlx5_hlist_entry *
flag = 1;
*match_action_pos = actions_n;
}
- if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE ||
- actions->type == RTE_FLOW_ACTION_TYPE_RSS)
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ case RTE_FLOW_ACTION_TYPE_RSS:
*qrss_action_pos = actions_n;
- if (actions->type == RTE_FLOW_ACTION_TYPE_SAMPLE) {
+ break;
+ case RTE_FLOW_ACTION_TYPE_SAMPLE:
sample = actions->conf;
ratio = sample->ratio;
sub_type = ((const struct rte_flow_action *)
(sample->actions))->type;
+ if (ratio == 1 && attr->transfer)
+ fdb_mirror = 1;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
+ case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
+ case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+ case RTE_FLOW_ACTION_TYPE_SET_TTL:
+ case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
+ case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
+ case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
+ case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ case RTE_FLOW_ACTION_TYPE_SET_META:
+ case RTE_FLOW_ACTION_TYPE_SET_TAG:
+ if (fdb_mirror)
+ *modify_after_mirror = 1;
+ break;
+ default:
+ break;
}
actions_n++;
}
- if (flag && action == RTE_FLOW_ACTION_TYPE_SAMPLE && attr->transfer) {
- if (ratio == 1) {
- /* FDB mirroring uses the destination array to implement
- * instead of FLOW_SAMPLER object.
- */
- if (sub_type != RTE_FLOW_ACTION_TYPE_END)
- flag = 0;
- }
+ if (flag && fdb_mirror && !*modify_after_mirror) {
+ /* FDB mirroring uses the destination array to implement
+ * instead of FLOW_SAMPLER object.
+ */
+ if (sub_type != RTE_FLOW_ACTION_TYPE_END)
+ flag = 0;
}
/* Count RTE_FLOW_ACTION_TYPE_END. */
return flag ? actions_n + 1 : 0;
@@ -4567,6 +4599,8 @@ struct mlx5_hlist_entry *
* The sample action position.
* @param[in] qrss_action_pos
* The Queue/RSS action position.
+ * @param[in] jump_table
+ * Add extra jump action flag.
* @param[out] error
* Perform verbose error reporting if not NULL.
*
@@ -4584,14 +4618,17 @@ struct mlx5_hlist_entry *
int actions_n,
int sample_action_pos,
int qrss_action_pos,
+ int jump_table,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_rte_flow_action_set_tag *set_tag;
struct mlx5_rte_flow_item_tag *tag_spec;
struct mlx5_rte_flow_item_tag *tag_mask;
+ struct rte_flow_action_jump *jump_action;
uint32_t tag_id = 0;
int index;
+ int append_index = 0;
int ret;
if (sample_action_pos < 0)
@@ -4599,13 +4636,37 @@ struct mlx5_hlist_entry *
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "invalid position of sample "
"action in list");
+ /* Prepare the actions for prefix and suffix flow. */
+ if (qrss_action_pos >= 0 && qrss_action_pos < sample_action_pos) {
+ index = qrss_action_pos;
+ /* Put the preceding the Queue/RSS action into prefix flow. */
+ if (index != 0)
+ memcpy(actions_pre, actions,
+ sizeof(struct rte_flow_action) * index);
+ /* Put others preceding the sample action into prefix flow. */
+ if (sample_action_pos > index + 1)
+ memcpy(actions_pre + index, actions + index + 1,
+ sizeof(struct rte_flow_action) *
+ (sample_action_pos - index - 1));
+ index = sample_action_pos - 1;
+ /* Put Queue/RSS action into Suffix flow. */
+ memcpy(actions_sfx, actions + qrss_action_pos,
+ sizeof(struct rte_flow_action));
+ actions_sfx++;
+ } else {
+ index = sample_action_pos;
+ if (index != 0)
+ memcpy(actions_pre, actions,
+ sizeof(struct rte_flow_action) * index);
+ }
/* For CX5, add an extra tag action for NIC-RX and E-Switch ingress.
* For CX6DX and above, metadata registers Cx preserve their value,
- * add an extra tag action for NIC-RX and E-Switch ingress and egress.
+ * add an extra tag action for NIC-RX and E-Switch Domain.
*/
if (add_tag) {
/* Prepare the prefix tag action. */
- set_tag = (void *)(actions_pre + actions_n + 1);
+ append_index++;
+ set_tag = (void *)(actions_pre + actions_n + append_index);
ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, 0, error);
if (ret < 0)
return ret;
@@ -4630,31 +4691,7 @@ struct mlx5_hlist_entry *
.type = (enum rte_flow_item_type)
RTE_FLOW_ITEM_TYPE_END,
};
- }
- /* Prepare the actions for prefix and suffix flow. */
- if (qrss_action_pos >= 0 && qrss_action_pos < sample_action_pos) {
- index = qrss_action_pos;
- /* Put the preceding the Queue/RSS action into prefix flow. */
- if (index != 0)
- memcpy(actions_pre, actions,
- sizeof(struct rte_flow_action) * index);
- /* Put others preceding the sample action into prefix flow. */
- if (sample_action_pos > index + 1)
- memcpy(actions_pre + index, actions + index + 1,
- sizeof(struct rte_flow_action) *
- (sample_action_pos - index - 1));
- index = sample_action_pos - 1;
- /* Put Queue/RSS action into Suffix flow. */
- memcpy(actions_sfx, actions + qrss_action_pos,
- sizeof(struct rte_flow_action));
- actions_sfx++;
- } else {
- index = sample_action_pos;
- if (index != 0)
- memcpy(actions_pre, actions,
- sizeof(struct rte_flow_action) * index);
- }
- if (add_tag) {
+ /* Prepare the tag action in prefix subflow. */
actions_pre[index++] =
(struct rte_flow_action){
.type = (enum rte_flow_action_type)
@@ -4665,6 +4702,22 @@ struct mlx5_hlist_entry *
memcpy(actions_pre + index, actions + sample_action_pos,
sizeof(struct rte_flow_action));
index += 1;
+ /* For the modify action after the sample action in E-Switch mirroring,
+ * Add the extra jump action in prefix subflow and jump into the next
+ * table, then do the modify action in the new table.
+ */
+ if (jump_table) {
+ /* Prepare the prefix jump action. */
+ append_index++;
+ jump_action = (void *)(actions_pre + actions_n + append_index);
+ jump_action->group = jump_table;
+ actions_pre[index++] =
+ (struct rte_flow_action){
+ .type = (enum rte_flow_action_type)
+ RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = jump_action,
+ };
+ }
actions_pre[index] = (struct rte_flow_action){
.type = (enum rte_flow_action_type)
RTE_FLOW_ACTION_TYPE_END,
@@ -5068,12 +5121,16 @@ struct mlx5_hlist_entry *
int sample_action_pos;
int qrss_action_pos;
int add_tag = 0;
+ int modify_after_mirror = 0;
+ uint16_t jump_table = 0;
+ const uint32_t next_ft_step = 1;
int ret = 0;
if (priv->sampler_en)
actions_n = flow_check_match_action(actions, attr,
RTE_FLOW_ACTION_TYPE_SAMPLE,
- &sample_action_pos, &qrss_action_pos);
+ &sample_action_pos, &qrss_action_pos,
+ &modify_after_mirror);
if (actions_n) {
/* The prefix actions must includes sample, tag, end. */
act_size = sizeof(struct rte_flow_action) * (actions_n * 2 + 1)
@@ -5097,16 +5154,23 @@ struct mlx5_hlist_entry *
if (add_tag)
sfx_items = (struct rte_flow_item *)((char *)sfx_actions
+ act_size);
+ if (modify_after_mirror)
+ jump_table = attr->group * MLX5_FLOW_TABLE_FACTOR +
+ next_ft_step;
pre_actions = sfx_actions + actions_n;
tag_id = flow_sample_split_prep(dev, add_tag, sfx_items,
actions, sfx_actions,
pre_actions, actions_n,
sample_action_pos,
- qrss_action_pos, error);
+ qrss_action_pos, jump_table,
+ error);
if (tag_id < 0 || (add_tag && !tag_id)) {
ret = -rte_errno;
goto exit;
}
+ if (modify_after_mirror)
+ flow_split_info->skip_scale =
+ 1 << MLX5_SCALE_JUMP_FLOW_GROUP_BIT;
/* Add the prefix subflow. */
ret = flow_create_split_inner(dev, flow, &dev_flow, attr,
items, pre_actions,
@@ -5117,21 +5181,28 @@ struct mlx5_hlist_entry *
}
dev_flow->handle->split_flow_id = tag_id;
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- /* Set the sfx group attr. */
- sample_res = (struct mlx5_flow_dv_sample_resource *)
- dev_flow->dv.sample_res;
- sfx_tbl = (struct mlx5_flow_tbl_resource *)
- sample_res->normal_path_tbl;
- sfx_tbl_data = container_of(sfx_tbl,
- struct mlx5_flow_tbl_data_entry, tbl);
- sfx_attr.group = sfx_attr.transfer ?
- (sfx_tbl_data->table_id - 1) :
- sfx_tbl_data->table_id;
+ if (!modify_after_mirror) {
+ /* Set the sfx group attr. */
+ sample_res = (struct mlx5_flow_dv_sample_resource *)
+ dev_flow->dv.sample_res;
+ sfx_tbl = (struct mlx5_flow_tbl_resource *)
+ sample_res->normal_path_tbl;
+ sfx_tbl_data = container_of(sfx_tbl,
+ struct mlx5_flow_tbl_data_entry,
+ tbl);
+ sfx_attr.group = sfx_attr.transfer ?
+ (sfx_tbl_data->table_id - 1) :
+ sfx_tbl_data->table_id;
+ } else {
+ MLX5_ASSERT(attr->transfer);
+ sfx_attr.group = jump_table;
+ }
flow_split_info->prefix_layers =
flow_get_prefix_layer_flags(dev_flow);
flow_split_info->prefix_mark = dev_flow->handle->mark;
/* Suffix group level already be scaled with factor, set
- * skip_scale to 1 to avoid scale again in translation.
+ * MLX5_SCALE_FLOW_GROUP_BIT of skip_scale to 1 to avoid scale
+ * again in translation.
*/
flow_split_info->skip_scale = 1 << MLX5_SCALE_FLOW_GROUP_BIT;
#endif
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 63569ad..4b191fd 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3600,8 +3600,6 @@ struct mlx5_cache_entry *
(dev, &res, dev_flow, error);
}
-static int fdb_mirror_limit;
-
/**
* Validate the modify-header actions.
*
@@ -3629,12 +3627,6 @@ struct mlx5_cache_entry *
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have encap action before"
" modify action");
- if ((action_flags & MLX5_FLOW_ACTION_SAMPLE) && fdb_mirror_limit)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION, NULL,
- "can't support sample action before"
- " modify action for E-Switch"
- " mirroring");
return 0;
}
@@ -4365,7 +4357,6 @@ struct mlx5_hlist_entry *
int actions_n = 0;
int ret;
- fdb_mirror_limit = 0;
if (!sample)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
@@ -4482,7 +4473,6 @@ struct mlx5_hlist_entry *
"E-Switch doesn't support "
"any optional action "
"for sampling");
- fdb_mirror_limit = 1;
if (sub_action_flags & MLX5_FLOW_ACTION_QUEUE)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
--
1.8.3.1
