From: Liang Ma <liang.j...@intel.com>
Add a simple API to allow getting the monitor conditions for
power-optimized monitoring of the Rx queues from the PMD, as well as
release notes information.
Signed-off-by: Liang Ma <liang.j...@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.bura...@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybche...@oktetlabs.ru>
---
Notes:
v13:
- Fix typos and issues raised by Andrew
doc/guides/rel_notes/release_21_02.rst | 5 +++++
lib/librte_ethdev/rte_ethdev.c | 28 ++++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 25 +++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev_driver.h | 22 ++++++++++++++++++++
lib/librte_ethdev/version.map | 3 +++
5 files changed, 83 insertions(+)
diff --git a/doc/guides/rel_notes/release_21_02.rst
b/doc/guides/rel_notes/release_21_02.rst
index 638f98168b..6de0cb568e 100644
--- a/doc/guides/rel_notes/release_21_02.rst
+++ b/doc/guides/rel_notes/release_21_02.rst
@@ -55,6 +55,11 @@ New Features
Also, make sure to start the actual text at the margin.
=======================================================
+* **ethdev: added new API for PMD power management**
+
+ * ``rte_eth_get_monitor_addr()``, to be used in conjunction with
+ ``rte_power_monitor()`` to enable automatic power management for PMD's.
+
Removed Items
-------------
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 17ddacc78d..e19dbd838b 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -5115,6 +5115,34 @@ rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t
queue_id,
dev->dev_ops->tx_burst_mode_get(dev, queue_id, mode));
}
+int
+rte_eth_get_monitor_addr(uint16_t port_id, uint16_t queue_id,
+ struct rte_power_monitor_cond *pmc)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_monitor_addr, -ENOTSUP);
+
+ if (queue_id >= dev->data->nb_rx_queues) {
+ RTE_ETHDEV_LOG(ERR, "Invalid Rx queue_id=%u\n", queue_id);
+ return -EINVAL;
+ }
+
+ if (pmc == NULL) {
+ RTE_ETHDEV_LOG(ERR, "Invalid power monitor condition=%p\n",
+ pmc);
+ return -EINVAL;
+ }
+
+ return eth_err(port_id,
+ dev->dev_ops->get_monitor_addr(dev->data->rx_queues[queue_id],
+ pmc));
+}
+
int
rte_eth_dev_set_mc_addr_list(uint16_t port_id,
struct rte_ether_addr *mc_addr_set,
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index f5f8919186..ca0f91312e 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -157,6 +157,7 @@ extern "C" {
#include <rte_common.h>
#include <rte_config.h>
#include <rte_ether.h>
+#include <rte_power_intrinsics.h>
#include "rte_ethdev_trace_fp.h"
#include "rte_dev_info.h"
@@ -4334,6 +4335,30 @@ __rte_experimental
int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
struct rte_eth_burst_mode *mode);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Retrieve the monitor condition for a given receive queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The Rx queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param pmc
+ * The pointer point to power-optimized monitoring condition structure.
+ *
+ * @return
+ * - 0: Success.
+ * -ENOTSUP: Operation not supported.
+ * -EINVAL: Invalid parameters.
+ * -ENODEV: Invalid port ID.
+ */
+__rte_experimental
+int rte_eth_get_monitor_addr(uint16_t port_id, uint16_t queue_id,
+ struct rte_power_monitor_cond *pmc);
+
/**
* Retrieve device registers and register attributes (number of registers and
* register size)
diff --git a/lib/librte_ethdev/rte_ethdev_driver.h
b/lib/librte_ethdev/rte_ethdev_driver.h
index 0eacfd8425..3b3b0ec1a0 100644
--- a/lib/librte_ethdev/rte_ethdev_driver.h
+++ b/lib/librte_ethdev/rte_ethdev_driver.h
@@ -763,6 +763,26 @@ typedef int (*eth_hairpin_queue_peer_unbind_t)
(struct rte_eth_dev *dev, uint16_t cur_queue, uint32_t direction);
/**< @internal Unbind peer queue from the current queue. */
+/**
+ * @internal
+ * Get address of memory location whose contents will change whenever there is
+ * new data to be received on an Rx queue.
+ *
+ * @param rxq
+ * Ethdev queue pointer.
+ * @param pmc
+ * The pointer to power-optimized monitoring condition structure.
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success
+ * @retval -EINVAL
+ * Invalid parameters
+ */
+typedef int (*eth_get_monitor_addr_t)(void *rxq,
+ struct rte_power_monitor_cond *pmc);
+
/**
* @internal A structure containing the functions exported by an Ethernet
driver.
*/
@@ -917,6 +937,8 @@ struct eth_dev_ops {
/**< Set up the connection between the pair of hairpin queues. */
eth_hairpin_queue_peer_unbind_t hairpin_queue_peer_unbind;
/**< Disconnect the hairpin queues of a pair from each other. */
+ eth_get_monitor_addr_t get_monitor_addr;
+ /**< Get power monitoring condition for Rx queue. */
};
/**
diff --git a/lib/librte_ethdev/version.map b/lib/librte_ethdev/version.map
index d3f5410806..a124e1e370 100644
--- a/lib/librte_ethdev/version.map
+++ b/lib/librte_ethdev/version.map
@@ -240,6 +240,9 @@ EXPERIMENTAL {
rte_flow_get_restore_info;
rte_flow_tunnel_action_decap_release;
rte_flow_tunnel_item_release;
+
+ # added in 21.02
+ rte_eth_get_monitor_addr;
};
INTERNAL {
--
2.25.1
