It seems Trex server is not launched successfully. So DTS as a client can’t
connect it.
Here are some tips to make sure Trex can work before integrating into DTS.
· Simple manual test for trex
o Go to $TREX/scripts: cd ./scripts
o Launch dpdk application, e.g. testpmd on dut. Testpmd can be launch at
first, also can be launch after trex server launched, but no matter when you
run testpmd, dut must be up before staring trex server.
o Launch trex server: ./t-rex-64 -i -c 20 # -c means cores number, here we
use 20 cores.
./t-rex-64 -c 20 -f /etc/trex_cfg.yaml # if you don't use default name
o Launch trex client and start traffic:
§ ./trex-console, we give commands to trex through trex-console.
§ start -f stl/bench.py -t size=64,vm=cached --port 0 -m 100% --force --pin
(64 frame size + 100% LR + P0)
§ start -f stl/bench.py -t size=64,vm=cached --port 1 -m 100% --force --pin
(64 frame size + 100% LR + P1)
§ tui (you will get a more friendship view of statistics)
§ Note: you can get other traffic scripts from ./stl, stl/bench.py is just
the one we used.
o Notes: to get the best performance, here are some suggestions:
§ Give trex enough cores.
§ Cores and NIC are in the same socket.
§ Simply what you want trex to do, complicated computer will cause performance
drop.
From: David Liu <d...@iol.unh.edu>
Sent: 2020年11月20日 3:34
To: Tu, Lijuan <lijuan...@intel.com>
Cc: dpdk-dev <dev@dpdk.org>
Subject: Re: DTS Test Nic Single Core Perf Scapy Naming Conflict
Hi Lijuan,
The DTS started without error but the nic single core test failed on a
"connection timeout - no response from TRex server" when I tried to run it on
an intel nic.
This happens when DTS uses arm-dell (traffic generator) to send packets to
arm-gigabyte (DUT) using the Intel nic {Ethernet Controller XL710 for 40GbE
QSFP+}
I wonder if you have any clue on this issue?
19/11/2020 19:05:55 TestNicSingleCorePerf: Test Case
test_perf_nic_single_core Result ERROR: Traceback (most recent call last):
File "/opt/dts/framework/test_case.py", line 319, in _execute_test_case
case_obj()
File "tests/TestSuite_nic_single_core_perf.py", line 200, in
test_perf_nic_single_core
self.perf_test(self.nb_ports)
File "tests/TestSuite_nic_single_core_perf.py", line 274, in perf_test
_, packets_received =
self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
File "/opt/dts/framework/pktgen_base.py", line 245, in measure_throughput
self._prepare_transmission(stream_ids=stream_ids)
File "/opt/dts/framework/pktgen_trex.py", line 778, in _prepare_transmission
self._conn.reset(ports=self._ports)
File
"/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
line 51, in wrap2
ret = f(*args, **kwargs)
File
"/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
line 339, in reset
self.clear_stats(ports)
File
"/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
line 51, in wrap2
ret = f(*args, **kwargs)
File
"/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
line 1492, in clear_stats
self._clear_stats_common(ports, clear_global, clear_xstats)
File
"/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/common/trex_client.py",
line 2876, in _clear_stats_common
raise TRexError(rc)
trex.common.trex_exceptions.TRexError: ^[[1m*** [RPC] - Failed to get server
response from tcp://172.18.0.40:4501<http://172.18.0.40:4501>^[[22m
19/11/2020 19:05:55 dts:
TEST SUITE ENDED: TestNicSingleCorePerf
19/11/2020 19:06:11 TestNicSingleCorePerf: tear_down_all failed:
Traceback (most recent call last):
File "/opt/dts/framework/test_case.py", line 430, in execute_tear_downall
self.tear_down_all()
File "tests/TestSuite_nic_single_core_perf.py", line 405, in tear_down_all
self.dut.build_install_dpdk(self.target)
File "/opt/dts/framework/project_dpdk.py", line 283, in build_install_dpdk
build_install_dpdk(target, extra_options)
File "/opt/dts/framework/project_dpdk.py", line 316, in
build_install_dpdk_linux_meson
self.send_expect("rm -rf " + target, "#")
File "/opt/dts/framework/crb.py", line 93, in send_expect
return self.session.send_expect(cmds, expected, timeout, verify)
File "/opt/dts/framework/ssh_connection.py", line 64, in send_expect
out = self.session.send_expect(cmds, expected, timeout, verify)
File "/opt/dts/framework/ssh_pexpect.py", line 103, in send_expect
raise(e)
File "/opt/dts/framework/ssh_pexpect.py", line 90, in send_expect
ret = self.send_expect_base(command, expected, timeout)
File "/opt/dts/framework/ssh_pexpect.py", line 81, in send_expect_base
self.__prompt(command, timeout)
File "/opt/dts/framework/ssh_pexpect.py", line 149, in __prompt
raise TimeoutException(command, self.get_output_all()) from None
exception.TimeoutException: TIMEOUT on rm -rf x86_64-native-linuxapp-gcc
Thanks,
David
On Thu, Nov 19, 2020 at 12:56 PM David Liu
<d...@iol.unh.edu<mailto:d...@iol.unh.edu>> wrote:
Hi Lijuan,
Thank you for the help.
I can run DTS without that error now,
Thanks,
David
On Tue, Nov 17, 2020 at 9:12 PM Tu, Lijuan
<lijuan...@intel.com<mailto:lijuan...@intel.com>> wrote:
Hi David,
Snice some protocols are only supported by scapy 2.4.4, it's recemented that
scapy 2.4.4 as major version for DTS.
However perf users might not care these advanced protocols, to be compatible
with trex, dts captured these exceptions and let it go through.
Fix was contained in the latest DTS. Could you update it.
commit 362ae41844e1992163b4eed53a721729985644be
Author: Chen, BoX C <box.c.c...@intel.com<mailto:box.c.c...@intel.com>>
Date: Wed Nov 4 10:52:09 2020 +0800
framework: fix Trex mode not working
DTS requires Trex compatible scapy, modify package loading mode and scapy
version verification rules
Signed-off-by: Chen, BoX C
<box.c.c...@intel.com<mailto:box.c.c...@intel.com>>
From: David Liu <d...@iol.unh.edu<mailto:d...@iol.unh.edu>>
Sent: 2020年11月18日 4:24
To: Tu, Lijuan <lijuan...@intel.com<mailto:lijuan...@intel.com>>
Cc: dpdk-dev <dev@dpdk.org<mailto:dev@dpdk.org>>
Subject: DTS Test Nic Single Core Perf Scapy Naming Conflict
Hi Lijuan,
I currently have issues with running the Nic Single-Core Perf Test.
I believe this is the scapy naming conflict issue, so I follow the solution
mentioned on the website to replace system scapy with trex scapy.
Then I got into another error that I wasn't able to get pass:
root@arm-dell:/opt/dts# ./dts
Traceback (most recent call last):
File "./main.py", line 50, in <module>
import dts
File "/opt/dts/framework/dts.py", line 47, in <module>
from tester import Tester
File "/opt/dts/framework/tester.py", line 52, in <module>
from packet import SCAPY_IMP_CMD
File "/opt/dts/framework/packet.py", line 72, in <module>
locals().update({clazz: getattr(module, clazz)})
AttributeError: module 'scapy.contrib.gtp' has no attribute
'GTPPDUSessionContainer'
Do you have any clue how to fix this?
Thanks.
David
