Hi Nipun, Some nits. Looks good otherwise.
> On Oct 15, 2020, at 8:23 AM, nipun.gu...@nxp.com <nipun.gu...@nxp.com> wrote: > > From: Nipun Gupta <nipun.gu...@nxp.com> > > With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload > capability, and separate RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL > capability to drop all error packets in hardware, testpmd > showcases this with a new added configuration option > 'enable-hw-drop-err-all'. > > Signed-off-by: Nipun Gupta <nipun.gu...@nxp.com> > --- > app/test-pmd/config.c | 35 +++++++++++++++++++++ > app/test-pmd/parameters.c | 7 +++++ > app/test-pmd/testpmd.c | 8 +++++ > app/test-pmd/testpmd.h | 1 + > doc/guides/nics/features.rst | 44 +++++++++++++++++++++++++++ > doc/guides/testpmd_app_ug/run_app.rst | 4 +++ > 6 files changed, 99 insertions(+) > > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c > index e73dc66c8..14ef4e468 100644 > --- a/app/test-pmd/config.c > +++ b/app/test-pmd/config.c > @@ -1027,6 +1027,41 @@ port_offload_cap_display(portid_t port_id) > printf("off\n"); > } > > + if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_ERR_PKT_DROP) { > + if (dev_info.rx_err_drop_offload_capa & > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS) { > + printf("RX L1 FCS Error pkt drop: "); > + if (ports[port_id].dev_conf.err_pkt_drop_conf.l1_fcs) > + printf("on\n"); > + else > + printf("off\n"); > + } > + if (dev_info.rx_err_drop_offload_capa & > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM) { > + printf("RX L3 Csum Error pkt drop: "); > + if (ports[port_id].dev_conf.err_pkt_drop_conf.l3_csum) > + printf("on\n"); > + else > + printf("off\n"); > + } > + if (dev_info.rx_err_drop_offload_capa & > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM) { > + printf("RX L4 Csum Error pkt drop: "); > + if (ports[port_id].dev_conf.err_pkt_drop_conf.l4_csum) > + printf("on\n"); > + else > + printf("off\n"); > + } > + if (dev_info.rx_err_drop_offload_capa & > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL) { > + printf("RX all Error pkt drop: "); > + if (ports[port_id].dev_conf.err_pkt_drop_conf.all) > + printf("on\n"); > + else > + printf("off\n"); > + } > + } > + > if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VLAN_INSERT) { > printf("VLAN insert: "); > if (ports[port_id].dev_conf.txmode.offloads & > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c > index 1ead59579..508612426 100644 > --- a/app/test-pmd/parameters.c > +++ b/app/test-pmd/parameters.c > @@ -142,6 +142,7 @@ usage(char* progname) > printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n"); > printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n"); > printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n"); > + printf(" --enable-hw-drop-err-all: enable hardware packet drop for all > error packets.\n"); > printf(" --enable-drop-en: enable per queue packet drop.\n"); > printf(" --disable-rss: disable rss.\n"); > printf(" --port-topology=<paired|chained|loop>: set port topology > (paired " > @@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv) > { "enable-hw-vlan-strip", 0, 0, 0 }, > { "enable-hw-vlan-extend", 0, 0, 0 }, > { "enable-hw-qinq-strip", 0, 0, 0 }, > + { "enable-hw-drop-err-all", 0, 0, 0 }, > { "enable-drop-en", 0, 0, 0 }, > { "disable-rss", 0, 0, 0 }, > { "port-topology", 1, 0, 0 }, > @@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv) > rmv_interrupt = 0; > if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all")) > flow_isolate_all = 1; > + if (!strcmp(lgopts[opt_idx].name, > + "enable-hw-drop-err-all")) { > + rx_err_pkt_drop_all = 1; > + } { } can be removed. > + > if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) { > char *end = NULL; > n = strtoull(optarg, &end, 16); > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c > index ccba71c07..c9e7397e6 100644 > --- a/app/test-pmd/testpmd.c > +++ b/app/test-pmd/testpmd.c > @@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */ > */ > uint8_t rmv_interrupt = 1; /* enabled by default */ > > +/* > + * Drop all RX error packets on HW itself. > + */ > +uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */ = 0 can be removed. > + > uint8_t hot_plug = 0; /**< hotplug disabled by default. */ > > /* After attach, port setup is called on event or by iterator */ > @@ -3359,6 +3364,9 @@ init_port_config(void) > (rte_eth_devices[pid].data->dev_flags & > RTE_ETH_DEV_INTR_RMV)) > port->dev_conf.intr_conf.rmv = 1; > + > + if (rx_err_pkt_drop_all) > + port->dev_conf.err_pkt_drop_conf.all = 1; > } > } > > diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h > index c7e7e41a9..eab154ed4 100644 > --- a/app/test-pmd/testpmd.h > +++ b/app/test-pmd/testpmd.h > @@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by > "--disable-device-start" parameter */ > extern volatile int test_done; /* stop packet forwarding when set to 1. */ > extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter > */ > extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter > */ > +extern uint8_t rx_err_pkt_drop_all; /**< enabled by > "--enable-hw-drop-err-all" parameter */ > extern uint32_t event_print_mask; > /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */ > extern bool setup_on_probe_event; /**< disabled by port setup-on iterator */ > diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst > index dd8c9555b..cb7fdfd8b 100644 > --- a/doc/guides/nics/features.rst > +++ b/doc/guides/nics/features.rst > @@ -606,6 +606,50 @@ Supports inner packet L4 checksum. > ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``. > > > +.. _nic_features_l1_fcs_rx_error_packet_drop: > + > +L1 FCS Error Packet drop on Rx > +------------------------------ > + > +Supports dropping of packets having L1 FCS error on Rx. > + > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l1_fcs``. > +* **[provides] rte_eth_dev_info**: > ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS``. > + > + > +.. _nic_features_l3_csum_rx_error_packet_drop: > + > +L3 checksum Error Packet drop on Rx > +----------------------------------- > + > +Supports dropping of packets having L3 Checksum error on Rx. > + > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l3_csum``. > +* **[provides] rte_eth_dev_info**: > ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM``. > + > + > +.. _nic_features_l4_csum_rx_error_packet_drop: > + > +L4 Checksum Error Packet drop on Rx > +----------------------------------- > + > +Supports dropping of packets having L1 FCS error on Rx. > + > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l4_csum``. > +* **[provides] rte_eth_dev_info**: > ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM``. > + > + > +.. _nic_features_all_rx_error_packet_drop: > + > +All/any Error Packet drop on Rx > +------------------------------- > + > +Supports dropping of packets having any of the errors like L1 FSC, L3/L4 > Checksum on Rx. s/FSC/FCS > + > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.all``. > +* **[provides] rte_eth_dev_info**: > ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL``. > + > + > .. _nic_features_packet_type_parsing: > > Packet type parsing > diff --git a/doc/guides/testpmd_app_ug/run_app.rst > b/doc/guides/testpmd_app_ug/run_app.rst > index e2539f693..20f2f8083 100644 > --- a/doc/guides/testpmd_app_ug/run_app.rst > +++ b/doc/guides/testpmd_app_ug/run_app.rst > @@ -213,6 +213,10 @@ The command line options are: > > Enable hardware QINQ strip. > > +* ``--enable-hw-drop-err-all`` > + > + Enable hardware packet drop for any error packets > + > * ``--enable-drop-en`` > > Enable per-queue packet drop for packets with no descriptors. > — > 2.17.1 > Reviewed-by: Dharmik Thakkar <dharmik.thak...@arm.com>