On Fri, Oct 23, 2020 at 11:59 PM Timothy McDaniel
<timothy.mcdan...@intel.com> wrote:
>
> Adds the meson build infrastructure, which includes
> compile-time constants in rte_config.h. DLB2 is
> only supported on Linux X86 platforms at this time.
>
> Signed-off-by: Timothy McDaniel <timothy.mcdan...@intel.com>
> Reviewed-by: Gage Eads <gage.e...@intel.com>
There is the following build error[1] with this patch when testing
with the latest dpdk-next-eventdev branch.
Timothy, Please check ./devtools/test-meson-builds.sh for each patch
before sending the next version of DLB and DLB2 to avoid delay in
pulling this series.
[1]
Message: Disabling mlx5 [drivers/vdpa/mlx5]: missing internal
dependency "common_mlx5"
drivers/meson.build:179: WARNING: Custom target input
'/export/dpdk-next-eventdev/drivers/event/dlb2/version.map' can't be
converted to File object(s).
This will become a hard error in the future.
drivers/meson.build:184: WARNING: Custom target input
'/export/dpdk-next-eventdev/drivers/event/dlb2/version.map' can't be
converted to File object(s).
This will become a hard error in the future.
drivers/meson.build:207:3: ERROR: File
/export/dpdk-next-eventdev/drivers/event/dlb2/version.map does not
exist.
> ---
> MAINTAINERS | 5 +++
> config/rte_config.h | 7 ++++
> doc/guides/eventdevs/dlb2.rst | 40
> +++++++++++++++++++++++
> doc/guides/eventdevs/index.rst | 1 +
> drivers/event/dlb2/meson.build | 13 ++++++++
> drivers/event/dlb2/rte_pmd_dlb2_event_version.map | 3 ++
> drivers/event/meson.build | 3 +-
> 7 files changed, 71 insertions(+), 1 deletion(-)
> create mode 100644 doc/guides/eventdevs/dlb2.rst
> create mode 100644 drivers/event/dlb2/meson.build
> create mode 100644 drivers/event/dlb2/rte_pmd_dlb2_event_version.map
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3b16d7a..f732f28 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1188,6 +1188,11 @@ M: Peter Mccarthy <peter.mccar...@intel.com>
> F: drivers/event/opdl/
> F: doc/guides/eventdevs/opdl.rst
>
> +Intel DLB2 Eventdev PMD
> +M: Timothy McDaniel <timothy.mcdan...@intel.com>
> +F: drivers/event/dlb2/
> +F: doc/guides/eventdevs/dlb2.rst
> +
>
> Rawdev Drivers
> --------------
> diff --git a/config/rte_config.h b/config/rte_config.h
> index 0bae630..fd1b3c3 100644
> --- a/config/rte_config.h
> +++ b/config/rte_config.h
> @@ -131,4 +131,11 @@
> /* QEDE PMD defines */
> #define RTE_LIBRTE_QEDE_FW ""
>
> +/* DLB2 defines */
> +#define RTE_LIBRTE_PMD_DLB2_POLL_INTERVAL 1000
> +#define RTE_LIBRTE_PMD_DLB2_UMWAIT_CTL_STATE 0
> +#undef RTE_LIBRTE_PMD_DLB2_QUELL_STATS
> +#define RTE_LIBRTE_PMD_DLB2_SW_CREDIT_QUANTA 32
> +#define RTE_PMD_DLB2_DEFAULT_DEPTH_THRESH 256
> +
> #endif /* _RTE_CONFIG_H_ */
> diff --git a/doc/guides/eventdevs/dlb2.rst b/doc/guides/eventdevs/dlb2.rst
> new file mode 100644
> index 0000000..e3091c9
> --- /dev/null
> +++ b/doc/guides/eventdevs/dlb2.rst
> @@ -0,0 +1,40 @@
> +.. SPDX-License-Identifier: BSD-3-Clause
> + Copyright(c) 2020 Intel Corporation.
> +
> +Driver for the Intel® Dynamic Load Balancer (DLB2)
> +==================================================
> +
> +The DPDK dlb poll mode driver supports the Intel® Dynamic Load Balancer.
> +
> +Prerequisites
> +-------------
> +
> +Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
> +the basic DPDK environment.
> +
> +Configuration
> +-------------
> +
> +The DLB2 PF PMD is a user-space PMD that uses VFIO to gain direct
> +device access. To use this operation mode, the PCIe PF device must be bound
> +to a DPDK-compatible VFIO driver, such as vfio-pci.
> +
> +Eventdev API Notes
> +------------------
> +
> +The DLB2 provides the functions of a DPDK event device; specifically, it
> +supports atomic, ordered, and parallel scheduling events from queues to
> ports.
> +However, the DLB2 hardware is not a perfect match to the eventdev API. Some
> DLB2
> +features are abstracted by the PMD such as directed ports.
> +
> +In general the dlb PMD is designed for ease-of-use and does not require a
> +detailed understanding of the hardware, but these details are important when
> +writing high-performance code. This section describes the places where the
> +eventdev API and DLB2 misalign.
> +
> +Flow ID
> +~~~~~~~
> +
> +The flow ID field is preserved in the event when it is scheduled in the
> +DLB2.
> +
> diff --git a/doc/guides/eventdevs/index.rst b/doc/guides/eventdevs/index.rst
> index bb66a5e..738788d 100644
> --- a/doc/guides/eventdevs/index.rst
> +++ b/doc/guides/eventdevs/index.rst
> @@ -11,6 +11,7 @@ application through the eventdev API.
> :maxdepth: 2
> :numbered:
>
> + dlb2
> dpaa
> dpaa2
> dsw
> diff --git a/drivers/event/dlb2/meson.build b/drivers/event/dlb2/meson.build
> new file mode 100644
> index 0000000..5324043
> --- /dev/null
> +++ b/drivers/event/dlb2/meson.build
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2019-2020 Intel Corporation
> +
> +if not is_linux or not dpdk_conf.has('RTE_ARCH_X86_64')
> + build = false
> + reason = 'only supported on ARCH_X86_64 Linux'
> + subdir_done()
> +endif
> +
> +sources = files(
> +)
> +
> +deps += ['mbuf', 'mempool', 'ring', 'pci', 'bus_pci']
> diff --git a/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
> b/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
> new file mode 100644
> index 0000000..4a76d1d
> --- /dev/null
> +++ b/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
> @@ -0,0 +1,3 @@
> +DPDK_21 {
> + local: *;
> +};
> diff --git a/drivers/event/meson.build b/drivers/event/meson.build
> index ebe76a7..1a54de4 100644
> --- a/drivers/event/meson.build
> +++ b/drivers/event/meson.build
> @@ -5,7 +5,8 @@ if is_windows
> subdir_done()
> endif
>
> -drivers = ['dpaa', 'dpaa2', 'octeontx2', 'opdl', 'skeleton', 'sw', 'dsw']
> +drivers = ['dlb2', 'dpaa', 'dpaa2', 'octeontx2', 'opdl', 'skeleton', 'sw',
> + 'dsw']
> if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
> dpdk_conf.has('RTE_ARCH_ARM64'))
> drivers += 'octeontx'
> --
> 2.6.4
>
