Some functions are common across cryptodev pmd and the event
crypto adapter. This patch moves them into a helper file.
Signed-off-by: Ankur Dwivedi <adwiv...@marvell.com>
---
drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 65 +---------------
.../octeontx2/otx2_cryptodev_ops_helper.h | 74 +++++++++++++++++++
2 files changed, 75 insertions(+), 64 deletions(-)
create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
index d38365a33..027fd0d47 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
@@ -13,6 +13,7 @@
#include "otx2_cryptodev_hw_access.h"
#include "otx2_cryptodev_mbox.h"
#include "otx2_cryptodev_ops.h"
+#include "otx2_cryptodev_ops_helper.h"
#include "otx2_ipsec_po_ops.h"
#include "otx2_mbox.h"
#include "otx2_sec_idev.h"
@@ -416,24 +417,6 @@ sym_session_configure(int driver_id, struct
rte_crypto_sym_xform *xform,
return -ENOTSUP;
}
-static void
-sym_session_clear(int driver_id, struct rte_cryptodev_sym_session *sess)
-{
- void *priv = get_sym_session_private_data(sess, driver_id);
- struct rte_mempool *pool;
-
- if (priv == NULL)
- return;
-
- memset(priv, 0, cpt_get_session_size());
-
- pool = rte_mempool_from_obj(priv);
-
- set_sym_session_private_data(sess, driver_id, NULL);
-
- rte_mempool_put(pool, priv);
-}
-
static __rte_always_inline int32_t __rte_hot
otx2_cpt_enqueue_req(const struct otx2_cpt_qp *qp,
struct pending_queue *pend_q,
@@ -919,52 +902,6 @@ otx2_cpt_dequeue_post_process(struct otx2_cpt_qp *qp,
struct rte_crypto_op *cop,
}
}
-static __rte_always_inline uint8_t
-otx2_cpt_compcode_get(struct cpt_request_info *req)
-{
- volatile struct cpt_res_s_9s *res;
- uint8_t ret;
-
- res = (volatile struct cpt_res_s_9s *)req->completion_addr;
-
- if (unlikely(res->compcode == CPT_9X_COMP_E_NOTDONE)) {
- if (rte_get_timer_cycles() < req->time_out)
- return ERR_REQ_PENDING;
-
- CPT_LOG_DP_ERR("Request timed out");
- return ERR_REQ_TIMEOUT;
- }
-
- if (likely(res->compcode == CPT_9X_COMP_E_GOOD)) {
- ret = NO_ERR;
- if (unlikely(res->uc_compcode)) {
- ret = res->uc_compcode;
- CPT_LOG_DP_DEBUG("Request failed with microcode error");
- CPT_LOG_DP_DEBUG("MC completion code 0x%x",
- res->uc_compcode);
- }
- } else {
- CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
-
- ret = res->compcode;
- switch (res->compcode) {
- case CPT_9X_COMP_E_INSTERR:
- CPT_LOG_DP_ERR("Request failed with instruction error");
- break;
- case CPT_9X_COMP_E_FAULT:
- CPT_LOG_DP_ERR("Request failed with DMA fault");
- break;
- case CPT_9X_COMP_E_HWERR:
- CPT_LOG_DP_ERR("Request failed with hardware error");
- break;
- default:
- CPT_LOG_DP_ERR("Request failed with unknown completion
code");
- }
- }
-
- return ret;
-}
-
static uint16_t
otx2_cpt_dequeue_burst(void *qptr, struct rte_crypto_op **ops, uint16_t nb_ops)
{
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h
b/drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h
new file mode 100644
index 000000000..764daadea
--- /dev/null
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef _OTX2_CRYPTODEV_OPS_HELPER_H_
+#define _OTX2_CRYPTODEV_OPS_HELPER_H_
+
+#include "cpt_pmd_logs.h"
+
+static void
+sym_session_clear(int driver_id, struct rte_cryptodev_sym_session *sess)
+{
+ void *priv = get_sym_session_private_data(sess, driver_id);
+ struct rte_mempool *pool;
+
+ if (priv == NULL)
+ return;
+
+ memset(priv, 0, cpt_get_session_size());
+
+ pool = rte_mempool_from_obj(priv);
+
+ set_sym_session_private_data(sess, driver_id, NULL);
+
+ rte_mempool_put(pool, priv);
+}
+
+static __rte_always_inline uint8_t
+otx2_cpt_compcode_get(struct cpt_request_info *req)
+{
+ volatile struct cpt_res_s_9s *res;
+ uint8_t ret;
+
+ res = (volatile struct cpt_res_s_9s *)req->completion_addr;
+
+ if (unlikely(res->compcode == CPT_9X_COMP_E_NOTDONE)) {
+ if (rte_get_timer_cycles() < req->time_out)
+ return ERR_REQ_PENDING;
+
+ CPT_LOG_DP_ERR("Request timed out");
+ return ERR_REQ_TIMEOUT;
+ }
+
+ if (likely(res->compcode == CPT_9X_COMP_E_GOOD)) {
+ ret = NO_ERR;
+ if (unlikely(res->uc_compcode)) {
+ ret = res->uc_compcode;
+ CPT_LOG_DP_DEBUG("Request failed with microcode error");
+ CPT_LOG_DP_DEBUG("MC completion code 0x%x",
+ res->uc_compcode);
+ }
+ } else {
+ CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
+
+ ret = res->compcode;
+ switch (res->compcode) {
+ case CPT_9X_COMP_E_INSTERR:
+ CPT_LOG_DP_ERR("Request failed with instruction error");
+ break;
+ case CPT_9X_COMP_E_FAULT:
+ CPT_LOG_DP_ERR("Request failed with DMA fault");
+ break;
+ case CPT_9X_COMP_E_HWERR:
+ CPT_LOG_DP_ERR("Request failed with hardware error");
+ break;
+ default:
+ CPT_LOG_DP_ERR("Request failed with unknown completion
code");
+ }
+ }
+
+ return ret;
+}
+
+#endif /* _OTX2_CRYPTODEV_OPS_HELPER_H_ */
--
2.28.0
