The patch adds following functions. - rte_eth_dev_save() The function is used for saving current rte_eth_dev structures. - rte_eth_dev_get_changed_port() The function receives the rte_eth_dev structures, then compare these with current values to know which port is actually attached or detached. - rte_eth_dev_get_addr_by_port() The function returns a pci address of a ethdev specified by port identifier. - rte_eth_dev_get_port_by_addr() The function returns a port identifier of a ethdev specified by pci address. - rte_eth_dev_get_name_by_port() The function returns a unique identifier name of a ethdev specified by port identifier. - Add rte_eth_dev_check_detachable() The function returns whether a PMD supports detach function.
Also the patch changes scope of rte_eth_dev_allocated() to global. This function will be called by virtual PMDs to support port hotplug. So change scope of the function to global. v5: - Fix return value of below functions. rte_eth_dev_get_changed_port(). rte_eth_dev_get_port_by_addr(). v4: - Add paramerter checking. v3: - Fix if-condition bug while comparing pci addresses. - Add error checking codes. Reported-by: Mark Enright <menrigh at brocade.com> Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp> --- lib/librte_ether/rte_ethdev.c | 98 ++++++++++++++++++++++++++++++++++++++++++- lib/librte_ether/rte_ethdev.h | 80 +++++++++++++++++++++++++++++++++++ 2 files changed, 177 insertions(+), 1 deletion(-) diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c index fd19140..2acafc7 100644 --- a/lib/librte_ether/rte_ethdev.c +++ b/lib/librte_ether/rte_ethdev.c @@ -206,7 +206,7 @@ rte_eth_dev_data_alloc(void) RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data)); } -static struct rte_eth_dev * +struct rte_eth_dev * rte_eth_dev_allocated(const char *name) { unsigned i; @@ -428,6 +428,102 @@ rte_eth_dev_count(void) return (nb_ports); } +void +rte_eth_dev_save(struct rte_eth_dev *devs) +{ + if (devs == NULL) + return; + + /* save current rte_eth_devices */ + memcpy(devs, rte_eth_devices, + sizeof(struct rte_eth_dev) * RTE_MAX_ETHPORTS); +} + +int +rte_eth_dev_get_changed_port(struct rte_eth_dev *devs, uint8_t *port_id) +{ + if ((devs == NULL) || (port_id == NULL)) + return -EINVAL; + + /* check which port was attached or detached */ + for (*port_id = 0; *port_id < RTE_MAX_ETHPORTS; (*port_id)++, devs++) { + if (rte_eth_devices[*port_id].attached ^ devs->attached) + return 0; + } + return -ENODEV; +} + +int +rte_eth_dev_get_addr_by_port(uint8_t port_id, struct rte_pci_addr *addr) +{ + if (rte_eth_dev_validate_port(port_id, TRACE) == DEV_INVALID) + return -EINVAL; + + if (addr == NULL) { + PMD_DEBUG_TRACE("Null pointer is specified\n"); + return -EINVAL; + } + + *addr = rte_eth_devices[port_id].pci_dev->addr; + return 0; +} + +int +rte_eth_dev_get_port_by_addr(struct rte_pci_addr *addr, uint8_t *port_id) +{ + struct rte_pci_addr *tmp; + + if ((addr == NULL) || (port_id == NULL)) { + PMD_DEBUG_TRACE("Null pointer is specified\n"); + return -EINVAL; + } + + for (*port_id = 0; *port_id < RTE_MAX_ETHPORTS; (*port_id)++) { + if (!rte_eth_devices[*port_id].attached) + continue; + if (!rte_eth_devices[*port_id].pci_dev) + continue; + tmp = &rte_eth_devices[*port_id].pci_dev->addr; + if (eal_compare_pci_addr(tmp, addr) == 0) + return 0; + } + return -ENODEV; +} + +int +rte_eth_dev_get_name_by_port(uint8_t port_id, char *name) +{ + char *tmp; + + if (rte_eth_dev_validate_port(port_id, TRACE) == DEV_INVALID) + return -EINVAL; + + if (name == NULL) { + PMD_DEBUG_TRACE("Null pointer is specified\n"); + return -EINVAL; + } + + /* shouldn't check 'rte_eth_devices[i].data', + * because it might be overwritten by VDEV PMD */ + tmp = rte_eth_dev_data[port_id].name; + strncpy(name, tmp, strlen(tmp) + 1); + return 0; +} + +int +rte_eth_dev_check_detachable(uint8_t port_id) +{ + uint32_t drv_flags; + + if (port_id >= RTE_MAX_ETHPORTS) { + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); + return -EINVAL; + } + + drv_flags = rte_eth_devices[port_id].driver->pci_drv.drv_flags; + return !(drv_flags & RTE_PCI_DRV_DETACHABLE); +} + static int rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues) { diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index 0b4c27c..ebc48b0 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -1616,6 +1616,86 @@ extern struct rte_eth_dev rte_eth_devices[]; extern uint8_t rte_eth_dev_count(void); /** + * Function for internal use by port hotplug functions. + * Copies current ethdev structures to the specified pointer. + * + * @param devs The pointer to the ethdev structures + */ +extern void rte_eth_dev_save(struct rte_eth_dev *devs); + +/** + * Function for internal use by port hotplug functions. + * Compare the specified ethdev structures with currents. Then + * if there is a port which status is changed, fill the specified pointer + * with the port id of that port. + * @param devs The pointer to the ethdev structures + * @param port_id The pointer to the port id + * @return + * - 0 on success, negative on error + */ +extern int rte_eth_dev_get_changed_port( + struct rte_eth_dev *devs, uint8_t *port_id); + +/** + * Function for internal use by port hotplug functions. + * Returns a pci address of a ethdev specified by port identifier. + * @param port_id + * The port identifier of the Ethernet device + * @param addr + * The pointer to the pci address + * @return + * - 0 on success, negative on error + */ +extern int rte_eth_dev_get_addr_by_port( + uint8_t port_id, struct rte_pci_addr *addr); + +/** + * Function for internal use by port hotplug functions. + * Returns a port identifier of a ethdev specified by pci address. + * @param addr + * The pointer to the pci address of the Ethernet device. + * @param port_id + * The pointer to the port identifier + * @return + * - 0 on success, negative on error + */ +extern int rte_eth_dev_get_port_by_addr( + struct rte_pci_addr *addr, uint8_t *port_id); + +/** + * Function for internal use by port hotplug functions. + * Returns a unique identifier name of a ethdev specified by port identifier. + * @param port_id + * The port identifier. + * @param name + * The pointer to the Unique identifier name for each Ethernet device + * @return + * - 0 on success, negative on error + */ +extern int rte_eth_dev_get_name_by_port(uint8_t port_id, char *name); + +/** + * Function for internal use by port hotplug functions. + * Check whether or not, a PMD that is handling the ethdev specified by port + * identifier can support detach function. + * @param port_id + * The port identifier + * @return + * - 0 on supporting detach function, negative on not supporting + */ +extern int rte_eth_dev_check_detachable(uint8_t port_id); + +/** + * Function for internal use by port hotplug functions. + * Returns a ethdev slot specified by the unique identifier name. + * @param name + * The pointer to the Unique identifier name for each Ethernet device + * @return + * - The pointer to the ethdev slot, on success. NULL on error + */ +extern struct rte_eth_dev *rte_eth_dev_allocated(const char *name); + +/** * Function for internal use by dummy drivers primarily, e.g. ring-based * driver. * Allocates a new ethdev slot for an ethernet device and returns the pointer -- 1.9.1