Hi Akhil,
Comments inline.
> -----Original Message-----
> From: Akhil Goyal <akhil.go...@nxp.com>
> Sent: Friday, September 18, 2020 9:03 PM
> To: Zhang, Roy Fan <roy.fan.zh...@intel.com>; dev@dpdk.org
> Cc: Trahe, Fiona <fiona.tr...@intel.com>; Kusztal, ArkadiuszX
> <arkadiuszx.kusz...@intel.com>; Dybkowski, AdamX
> <adamx.dybkow...@intel.com>
> Subject: RE: [dpdk-dev v9 3/4] test/crypto: add unit-test for cryptodev direct
> APIs
>
> Hi Fan,
>
> > Subject: [dpdk-dev v9 3/4] test/crypto: add unit-test for cryptodev direct
> APIs
> >
> > This patch adds the QAT test to use cryptodev symmetric crypto
> > direct APIs.
> >
> > Signed-off-by: Fan Zhang <roy.fan.zh...@intel.com>
> > ---
> > app/test/test_cryptodev.c | 461 +++++++++++++++++++++++---
> > app/test/test_cryptodev.h | 7 +
> > app/test/test_cryptodev_blockcipher.c | 51 ++-
> > 3 files changed, 456 insertions(+), 63 deletions(-)
> >
> > diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> > index 70bf6fe2c..13f642e0e 100644
> > --- a/app/test/test_cryptodev.c
> > +++ b/app/test/test_cryptodev.c
> > @@ -49,6 +49,8 @@
> > #define VDEV_ARGS_SIZE 100
> > #define MAX_NB_SESSIONS 4
> >
> > +#define MAX_DRV_SERVICE_CTX_SIZE 256
> > +
> > #define IN_PLACE 0
> > #define OUT_OF_PLACE 1
> >
> > @@ -57,6 +59,8 @@ static int gbl_driver_id;
> > static enum rte_security_session_action_type gbl_action_type =
> > RTE_SECURITY_ACTION_TYPE_NONE;
> >
> > +int cryptodev_dp_test;
> > +
>
> Why do we need this? We should make decision based on Feature flag of
> crypto device.
Even the feature flag is supported we may want to test both cryptodev_op
Datapath and the new data pathes. The parameter is set by the command
Only.
>
>
> > struct crypto_testsuite_params {
> > struct rte_mempool *mbuf_pool;
> > struct rte_mempool *large_mbuf_pool;
> > @@ -147,6 +151,182 @@ ceil_byte_length(uint32_t num_bits)
> > return (num_bits >> 3);
> > }
> >
> > +void
> > +process_sym_hw_api_op(uint8_t dev_id, uint16_t qp_id, struct
> rte_crypto_op
> > *op,
> > + uint8_t is_cipher, uint8_t is_auth, uint8_t len_in_bits,
> > + uint8_t cipher_iv_len)
> > +{
> > + int32_t n;
> > + struct rte_crypto_sym_op *sop;
> > + struct rte_crypto_op *ret_op = NULL;
> > + struct rte_crypto_vec data_vec[UINT8_MAX];
> > + union rte_crypto_sym_additional_data a_data;
> > + union rte_crypto_sym_ofs ofs;
> > + int32_t status;
> > + uint32_t max_len;
> > + union rte_cryptodev_session_ctx sess;
> > + enum rte_crypto_dp_service service_type;
> > + uint32_t count = 0;
> > + uint8_t service_data[MAX_DRV_SERVICE_CTX_SIZE] = {0};
> > + struct rte_crypto_dp_service_ctx *ctx = (void *)service_data;
> > + uint32_t cipher_offset = 0, cipher_len = 0, auth_offset = 0,
> > + auth_len = 0;
> > + int ctx_service_size;
> > +
> > + sop = op->sym;
> > +
> > + sess.crypto_sess = sop->session;
> > +
> > + if (is_cipher && is_auth) {
> > + service_type = RTE_CRYPTO_DP_SYM_CHAIN;
> > + cipher_offset = sop->cipher.data.offset;
> > + cipher_len = sop->cipher.data.length;
> > + auth_offset = sop->auth.data.offset;
> > + auth_len = sop->auth.data.length;
> > + max_len = RTE_MAX(cipher_offset + cipher_len,
> > + auth_offset + auth_len);
> > + } else if (is_cipher) {
> > + service_type = RTE_CRYPTO_DP_SYM_CIPHER_ONLY;
> > + cipher_offset = sop->cipher.data.offset;
> > + cipher_len = sop->cipher.data.length;
> > + max_len = cipher_len + cipher_offset;
> > + } else if (is_auth) {
> > + service_type = RTE_CRYPTO_DP_SYM_AUTH_ONLY;
> > + auth_offset = sop->auth.data.offset;
> > + auth_len = sop->auth.data.length;
> > + max_len = auth_len + auth_offset;
> > + } else { /* aead */
> > + service_type = RTE_CRYPTO_DP_SYM_AEAD;
> > + cipher_offset = sop->aead.data.offset;
> > + cipher_len = sop->aead.data.length;
> > + max_len = cipher_len + cipher_offset;
> > + }
> > +
> > + if (len_in_bits) {
> > + max_len = max_len >> 3;
> > + cipher_offset = cipher_offset >> 3;
> > + auth_offset = auth_offset >> 3;
> > + cipher_len = cipher_len >> 3;
> > + auth_len = auth_len >> 3;
> > + }
> > +
> > + ctx_service_size =
> rte_cryptodev_dp_get_service_ctx_data_size(dev_id);
> > + assert(ctx_service_size <= MAX_DRV_SERVICE_CTX_SIZE &&
> > + ctx_service_size > 0);
> > +
> > + if (rte_cryptodev_dp_configure_service(dev_id, qp_id, service_type,
> > + RTE_CRYPTO_OP_WITH_SESSION, sess, ctx, 0) < 0) {
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
>
> **_dp_configure_service does not provide context of the API. What does
> service mean here?
> Can we rename it to rte_cryptodev_configure_raw_dp?
> This gives better readability to have an API to configure crypto device for
> raw
> data path.
Great name. Thanks. Will change.
>
> > +
> > + /* test update service */
> > + if (rte_cryptodev_dp_configure_service(dev_id, qp_id, service_type,
> > + RTE_CRYPTO_OP_WITH_SESSION, sess, ctx, 1) < 0) {
>
> Do we really need an extra parameter to specify update? Can we not call
> again same API
> for update? Anyway the implementation will be copying the complete
> information from
> the sess.
Explained in the last email replying your comments to the 4th patch.
>
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
> > +
> > + n = rte_crypto_mbuf_to_vec(sop->m_src, 0, max_len,
> > + data_vec, RTE_DIM(data_vec));
> > + if (n < 0 || n > sop->m_src->nb_segs) {
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
> > +
> > + ofs.raw = 0;
> > +
> > + switch (service_type) {
> > + case RTE_CRYPTO_DP_SYM_AEAD:
> > + ofs.ofs.cipher.head = cipher_offset;
> > + ofs.ofs.cipher.tail = max_len - cipher_offset - cipher_len;
> > + a_data.aead.iv_ptr = rte_crypto_op_ctod_offset(op, void *,
> > + IV_OFFSET);
> > + a_data.aead.iv_iova = rte_crypto_op_ctophys_offset(op,
> > + IV_OFFSET);
> > + a_data.aead.aad_ptr = (void *)sop->aead.aad.data;
> > + a_data.aead.aad_iova = sop->aead.aad.phys_addr;
> > + a_data.aead.digest_ptr = (void *)sop->aead.digest.data;
> > + a_data.aead.digest_iova = sop->aead.digest.phys_addr;
> > + break;
> > + case RTE_CRYPTO_DP_SYM_CIPHER_ONLY:
> > + ofs.ofs.cipher.head = cipher_offset;
> > + ofs.ofs.cipher.tail = max_len - cipher_offset - cipher_len;
> > + a_data.cipher_auth.cipher_iv_ptr =
> rte_crypto_op_ctod_offset(
> > + op, void *, IV_OFFSET);
> > + a_data.cipher_auth.cipher_iv_iova =
> > + rte_crypto_op_ctophys_offset(op,
> IV_OFFSET);
> > + break;
> > + case RTE_CRYPTO_DP_SYM_AUTH_ONLY:
> > + ofs.ofs.auth.head = auth_offset;
> > + ofs.ofs.auth.tail = max_len - auth_offset - auth_len;
> > + a_data.cipher_auth.auth_iv_ptr =
> rte_crypto_op_ctod_offset(
> > + op, void *, IV_OFFSET + cipher_iv_len);
> > + a_data.cipher_auth.auth_iv_iova =
> > + rte_crypto_op_ctophys_offset(op,
> IV_OFFSET +
> > + cipher_iv_len);
> > + a_data.cipher_auth.digest_ptr = (void *)sop-
> >auth.digest.data;
> > + a_data.cipher_auth.digest_iova = sop-
> >auth.digest.phys_addr;
> > + break;
> > + case RTE_CRYPTO_DP_SYM_CHAIN:
> > + ofs.ofs.cipher.head = cipher_offset;
> > + ofs.ofs.cipher.tail = max_len - cipher_offset - cipher_len;
> > + ofs.ofs.auth.head = auth_offset;
> > + ofs.ofs.auth.tail = max_len - auth_offset - auth_len;
> > + a_data.cipher_auth.cipher_iv_ptr =
> rte_crypto_op_ctod_offset(
> > + op, void *, IV_OFFSET);
> > + a_data.cipher_auth.cipher_iv_iova =
> > + rte_crypto_op_ctophys_offset(op,
> IV_OFFSET);
> > + a_data.cipher_auth.auth_iv_ptr =
> rte_crypto_op_ctod_offset(
> > + op, void *, IV_OFFSET + cipher_iv_len);
> > + a_data.cipher_auth.auth_iv_iova =
> > + rte_crypto_op_ctophys_offset(op,
> IV_OFFSET +
> > + cipher_iv_len);
> > + a_data.cipher_auth.digest_ptr = (void *)sop-
> >auth.digest.data;
> > + a_data.cipher_auth.digest_iova = sop-
> >auth.digest.phys_addr;
>
> Instead of cipher_auth, it should be chain. Can we also support "hash then
> cipher" case also?
Cipher_auth is a name to describe the fields needed for cipher only, auth only,
and chain Operation. The "cipher" is shown before "auth" is merely because of
alphabetical order. Of course hash then cipher is supported - as long as a
session can be created successfully by a PMD, the API supports it (but not OOP).
>
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + status = rte_cryptodev_dp_sym_submit_single_job(ctx, data_vec, n,
> ofs,
> > + &a_data, (void *)op);
> > + if (status < 0) {
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
> > +
> > + status = rte_cryptodev_dp_sym_submit_done(ctx, 1);
> > + if (status < 0) {
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
> > +
> > +
> > + status = -1;
> > + while (count++ < 65535 && status == -1) {
> > + status = rte_cryptodev_dp_sym_dequeue_single_job(ctx,
> > + (void **)&ret_op);
> > + if (status == -1)
> > + rte_pause();
> > + }
> > +
> > + if (status != -1) {
> > + if (rte_cryptodev_dp_sym_dequeue_done(ctx, 1) < 0) {
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
> > + }
> > +
> > + if (count == 65536 || status != 1 || ret_op != op) {
>
> Remove hardcode 65536
Will do.
>
> > + op->status = RTE_CRYPTO_OP_STATUS_ERROR;
> > + return;
> > + }
> > +
> > + op->status = status == 1 ? RTE_CRYPTO_OP_STATUS_SUCCESS :
> > + RTE_CRYPTO_OP_STATUS_ERROR;
> > +}
> > +
> > static void
> > process_cpu_aead_op(uint8_t dev_id, struct rte_crypto_op *op)
> > {
> > @@ -1656,6 +1836,9 @@
> > test_AES_CBC_HMAC_SHA512_decrypt_perform(struct
> > rte_cryptodev_sym_session *sess,
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 0, 0);
>
> Can we rename process_sym_hw_api_op to process_sym_hw_raw_op?
Yes.
>
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params-
> > >valid_devs[0],
> > @@ -1710,12 +1893,18 @@ test_AES_cipheronly_all(void)
> > static int
> > test_AES_docsis_all(void)
> > {
> > + /* Data-path service does not support DOCSIS yet */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > return test_blockcipher(BLKCIPHER_AES_DOCSIS_TYPE);
> > }
> >
> > static int
> > test_DES_docsis_all(void)
> > {
> > + /* Data-path service does not support DOCSIS yet */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > return test_blockcipher(BLKCIPHER_DES_DOCSIS_TYPE);
> > }
> >
> > @@ -2470,7 +2659,11 @@ test_snow3g_authentication(const struct
> > snow3g_hash_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 1, 0);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > ut_params->obuf = ut_params->op->sym->m_src;
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -2549,7 +2742,11 @@ test_snow3g_authentication_verify(const struct
> > snow3g_hash_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 1, 0);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > ut_params->obuf = ut_params->op->sym->m_src;
> > @@ -2619,6 +2816,9 @@ test_kasumi_authentication(const struct
> > kasumi_hash_test_data *tdata)
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 1, 0);
> > else
> > ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > @@ -2690,7 +2890,11 @@ test_kasumi_authentication_verify(const struct
> > kasumi_hash_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 1, 0);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > ut_params->obuf = ut_params->op->sym->m_src;
> > @@ -2897,8 +3101,12 @@ test_kasumi_encryption(const struct
> > kasumi_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > - ut_params->op);
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > + ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > ut_params->obuf = ut_params->op->sym->m_dst;
> > @@ -2983,7 +3191,11 @@ test_kasumi_encryption_sgl(const struct
> > kasumi_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -3026,8 +3238,9 @@ test_kasumi_encryption_oop(const struct
> > kasumi_test_data *tdata)
> > struct rte_cryptodev_sym_capability_idx cap_idx;
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_KASUMI_F8;
> > + /* Data-path service does not support OOP */
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > /* Create KASUMI session */
> > @@ -3107,8 +3320,9 @@ test_kasumi_encryption_oop_sgl(const struct
> > kasumi_test_data *tdata)
> > struct rte_cryptodev_sym_capability_idx cap_idx;
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_KASUMI_F8;
> > + /* Data-path service does not support OOP */
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
> > @@ -3192,8 +3406,9 @@ test_kasumi_decryption_oop(const struct
> > kasumi_test_data *tdata)
> > struct rte_cryptodev_sym_capability_idx cap_idx;
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_KASUMI_F8;
> > + /* Data-path service does not support OOP */
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > /* Create KASUMI session */
> > @@ -3306,7 +3521,11 @@ test_kasumi_decryption(const struct
> > kasumi_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, 0);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -3381,7 +3600,11 @@ test_snow3g_encryption(const struct
> > snow3g_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -3419,7 +3642,7 @@ test_snow3g_encryption_oop(const struct
> > snow3g_test_data *tdata)
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > /* Create SNOW 3G session */
> > @@ -3502,7 +3725,7 @@ test_snow3g_encryption_oop_sgl(const struct
> > snow3g_test_data *tdata)
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
> > @@ -3621,7 +3844,7 @@ test_snow3g_encryption_offset_oop(const
> struct
> > snow3g_test_data *tdata)
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > /* Create SNOW 3G session */
> > @@ -3756,7 +3979,11 @@ static int test_snow3g_decryption(const struct
> > snow3g_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > ut_params->obuf = ut_params->op->sym->m_dst;
> > @@ -3791,7 +4018,7 @@ static int test_snow3g_decryption_oop(const
> struct
> > snow3g_test_data *tdata)
> > cap_idx.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > cap_idx.algo.cipher = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > - &cap_idx) == NULL)
> > + &cap_idx) == NULL || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > /* Create SNOW 3G session */
> > @@ -3924,7 +4151,11 @@ test_zuc_cipher_auth(const struct
> > wireless_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > ut_params->obuf = ut_params->op->sym->m_src;
> > @@ -4019,7 +4250,11 @@ test_snow3g_cipher_auth(const struct
> > snow3g_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > ut_params->obuf = ut_params->op->sym->m_src;
> > @@ -4087,6 +4322,8 @@ test_snow3g_auth_cipher(const struct
> > snow3g_test_data *tdata,
> > printf("Device doesn't support digest encrypted.\n");
> > return -ENOTSUP;
> > }
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > }
> >
> > /* Create SNOW 3G session */
> > @@ -4155,7 +4392,11 @@ test_snow3g_auth_cipher(const struct
> > snow3g_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -4266,6 +4507,8 @@ test_snow3g_auth_cipher_sgl(const struct
> > snow3g_test_data *tdata,
> > return -ENOTSUP;
> > }
> > } else {
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > if (!(feat_flags &
> RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT))
> > {
> > printf("Device doesn't support out-of-place scatter-
> > gather "
> > "in both input and output mbufs.\n");
> > @@ -4344,7 +4587,11 @@ test_snow3g_auth_cipher_sgl(const struct
> > snow3g_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -4453,6 +4700,8 @@ test_kasumi_auth_cipher(const struct
> > kasumi_test_data *tdata,
> > uint64_t feat_flags = dev_info.feature_flags;
> >
> > if (op_mode == OUT_OF_PLACE) {
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > if (!(feat_flags & RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED))
> {
> > printf("Device doesn't support digest encrypted.\n");
> > return -ENOTSUP;
> > @@ -4526,7 +4775,11 @@ test_kasumi_auth_cipher(const struct
> > kasumi_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -4638,6 +4891,8 @@ test_kasumi_auth_cipher_sgl(const struct
> > kasumi_test_data *tdata,
> > return -ENOTSUP;
> > }
> > } else {
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > if (!(feat_flags &
> RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT))
> > {
> > printf("Device doesn't support out-of-place scatter-
> > gather "
> > "in both input and output mbufs.\n");
> > @@ -4716,7 +4971,11 @@ test_kasumi_auth_cipher_sgl(const struct
> > kasumi_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -4857,7 +5116,11 @@ test_kasumi_cipher_auth(const struct
> > kasumi_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -4944,7 +5207,11 @@ test_zuc_encryption(const struct
> wireless_test_data
> > *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -5031,7 +5298,11 @@ test_zuc_encryption_sgl(const struct
> > wireless_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 0, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -5119,7 +5390,11 @@ test_zuc_authentication(const struct
> > wireless_test_data *tdata)
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 1, 0);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > ut_params->obuf = ut_params->op->sym->m_src;
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -5177,6 +5452,8 @@ test_zuc_auth_cipher(const struct
> wireless_test_data
> > *tdata,
> > return -ENOTSUP;
> > }
> > } else {
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > if (!(feat_flags &
> RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT))
> > {
> > printf("Device doesn't support out-of-place scatter-
> > gather "
> > "in both input and output mbufs.\n");
> > @@ -5251,7 +5528,11 @@ test_zuc_auth_cipher(const struct
> > wireless_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -5359,6 +5640,8 @@ test_zuc_auth_cipher_sgl(const struct
> > wireless_test_data *tdata,
> > return -ENOTSUP;
> > }
> > } else {
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > if (!(feat_flags &
> RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT))
> > {
> > printf("Device doesn't support out-of-place scatter-
> > gather "
> > "in both input and output mbufs.\n");
> > @@ -5437,7 +5720,11 @@ test_zuc_auth_cipher_sgl(const struct
> > wireless_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 1, tdata->cipher_iv.len);
> > + else
> > + ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> > @@ -5580,6 +5867,9 @@ test_kasumi_decryption_test_case_2(void)
> > static int
> > test_kasumi_decryption_test_case_3(void)
> > {
> > + /* rte_crypto_mbuf_to_vec does not support incomplete mbuf build
> */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > return test_kasumi_decryption(&kasumi_test_case_3);
> > }
> >
> > @@ -5779,6 +6069,9 @@
> test_snow3g_auth_cipher_part_digest_enc_oop(void)
> > static int
> > test_snow3g_auth_cipher_test_case_3_sgl(void)
> > {
> > + /* rte_crypto_mbuf_to_vec does not support incomplete mbuf build
> */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > return test_snow3g_auth_cipher_sgl(
> > &snow3g_auth_cipher_test_case_3, IN_PLACE, 0);
> > }
> > @@ -5793,6 +6086,9 @@
> test_snow3g_auth_cipher_test_case_3_oop_sgl(void)
> > static int
> > test_snow3g_auth_cipher_part_digest_enc_sgl(void)
> > {
> > + /* rte_crypto_mbuf_to_vec does not support incomplete mbuf build
> */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > return test_snow3g_auth_cipher_sgl(
> > &snow3g_auth_cipher_partial_digest_encryption,
> > IN_PLACE, 0);
> > @@ -6146,10 +6442,9 @@ test_mixed_auth_cipher(const struct
> > mixed_cipher_auth_test_data *tdata,
> > unsigned int ciphertext_len;
> >
> > struct rte_cryptodev_info dev_info;
> > - struct rte_crypto_op *op;
> >
> > /* Check if device supports particular algorithms separately */
> > - if (test_mixed_check_if_unsupported(tdata))
> > + if (test_mixed_check_if_unsupported(tdata) || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
> > @@ -6161,6 +6456,9 @@ test_mixed_auth_cipher(const struct
> > mixed_cipher_auth_test_data *tdata,
> > return -ENOTSUP;
> > }
> >
> > + if (op_mode == OUT_OF_PLACE)
> > + return -ENOTSUP;
> > +
> > /* Create the session */
> > if (verify)
> > retval = create_wireless_algo_cipher_auth_session(
> > @@ -6192,9 +6490,11 @@ test_mixed_auth_cipher(const struct
> > mixed_cipher_auth_test_data *tdata,
> > /* clear mbuf payload */
> > memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
> > rte_pktmbuf_tailroom(ut_params->ibuf));
> > - if (op_mode == OUT_OF_PLACE)
> > + if (op_mode == OUT_OF_PLACE) {
> > +
> > memset(rte_pktmbuf_mtod(ut_params->obuf, uint8_t *), 0,
> > rte_pktmbuf_tailroom(ut_params->obuf));
> > + }
>
> Unnecessary change.
>
> >
> > ciphertext_len = ceil_byte_length(tdata->ciphertext.len_bits);
> > plaintext_len = ceil_byte_length(tdata->plaintext.len_bits);
> > @@ -6235,18 +6535,17 @@ test_mixed_auth_cipher(const struct
> > mixed_cipher_auth_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - op = process_crypto_request(ts_params->valid_devs[0],
> > + ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > ut_params->op);
> >
> > /* Check if the op failed because the device doesn't */
> > /* support this particular combination of algorithms */
> > - if (op == NULL && ut_params->op->status ==
> > + if (ut_params->op == NULL && ut_params->op->status ==
> > RTE_CRYPTO_OP_STATUS_INVALID_SESSION) {
> > printf("Device doesn't support this mixed combination. "
> > "Test Skipped.\n");
> > return -ENOTSUP;
> > }
> > - ut_params->op = op;
>
> Unnecessary change
>
>
>
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > @@ -6337,10 +6636,9 @@ test_mixed_auth_cipher_sgl(const struct
> > mixed_cipher_auth_test_data *tdata,
> > uint8_t digest_buffer[10000];
> >
> > struct rte_cryptodev_info dev_info;
> > - struct rte_crypto_op *op;
> >
> > /* Check if device supports particular algorithms */
> > - if (test_mixed_check_if_unsupported(tdata))
> > + if (test_mixed_check_if_unsupported(tdata) || cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
> > @@ -6440,20 +6738,18 @@ test_mixed_auth_cipher_sgl(const struct
> > mixed_cipher_auth_test_data *tdata,
> > if (retval < 0)
> > return retval;
> >
> > - op = process_crypto_request(ts_params->valid_devs[0],
> > + ut_params->op = process_crypto_request(ts_params-
> >valid_devs[0],
> > ut_params->op);
> >
> > /* Check if the op failed because the device doesn't */
> > /* support this particular combination of algorithms */
> > - if (op == NULL && ut_params->op->status ==
> > + if (ut_params->op == NULL && ut_params->op->status ==
> > RTE_CRYPTO_OP_STATUS_INVALID_SESSION) {
> > printf("Device doesn't support this mixed combination. "
> > "Test Skipped.\n");
> > return -ENOTSUP;
> > }
>
> Unnecessary change
>
> >
> > - ut_params->op = op;
> > -
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
> >
> > ut_params->obuf = (op_mode == IN_PLACE ?
> > @@ -7043,6 +7339,9 @@ test_authenticated_encryption(const struct
> > aead_test_data *tdata)
> > /* Process crypto operation */
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_aead_op(ts_params->valid_devs[0],
> ut_params-
> > >op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 0, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -8540,6 +8839,9 @@ test_authenticated_decryption(const struct
> > aead_test_data *tdata)
> > /* Process crypto operation */
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_aead_op(ts_params->valid_devs[0],
> ut_params-
> > >op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 0, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -8833,6 +9135,9 @@ test_authenticated_encryption_oop(const struct
> > aead_test_data *tdata)
> > if (rte_cryptodev_sym_capability_get(ts_params->valid_devs[0],
> > &cap_idx) == NULL)
> > return -ENOTSUP;
> > + /* Data-path service does not support OOP */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> >
> > /* not supported with CPU crypto */
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > @@ -8923,8 +9228,9 @@ test_authenticated_decryption_oop(const struct
> > aead_test_data *tdata)
> > &cap_idx) == NULL)
> > return -ENOTSUP;
> >
> > - /* not supported with CPU crypto */
> > - if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > + /* not supported with CPU crypto and data-path service*/
> > + if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO
> ||
> > + cryptodev_dp_test)
> > return -ENOTSUP;
> >
> > /* Create AEAD session */
> > @@ -9151,8 +9457,13 @@ test_authenticated_decryption_sessionless(
> > "crypto op session type not sessionless");
> >
> > /* Process crypto operation */
> > - TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params-
> > >valid_devs[0],
> > - ut_params->op), "failed to process sym crypto op");
> > + if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 0, 0, 0);
> > + else
> > + TEST_ASSERT_NOT_NULL(process_crypto_request(
> > + ts_params->valid_devs[0], ut_params->op),
> > + "failed to process sym crypto op");
> >
> > TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
> >
> > @@ -9472,6 +9783,9 @@ test_MD5_HMAC_generate(const struct
> > HMAC_MD5_vector *test_case)
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -9530,6 +9844,9 @@ test_MD5_HMAC_verify(const struct
> > HMAC_MD5_vector *test_case)
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -10098,6 +10415,9 @@ test_AES_GMAC_authentication(const struct
> > gmac_test_data *tdata)
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -10215,6 +10535,9 @@ test_AES_GMAC_authentication_verify(const
> > struct gmac_test_data *tdata)
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -10780,7 +11103,10 @@
> > test_authentication_verify_fail_when_data_corruption(
> > TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
> > RTE_CRYPTO_OP_STATUS_SUCCESS,
> > "authentication not failed");
> > - } else {
> > + } else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 0, 0);
> > + else {
> > ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NULL(ut_params->op, "authentication not
> > failed");
> > @@ -10851,7 +11177,10 @@
> > test_authentication_verify_GMAC_fail_when_corruption(
> > TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
> > RTE_CRYPTO_OP_STATUS_SUCCESS,
> > "authentication not failed");
> > - } else {
> > + } else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 1, 0, 0);
> > + else {
> > ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NULL(ut_params->op, "authentication not
> > failed");
> > @@ -10926,7 +11255,10 @@
> > test_authenticated_decryption_fail_when_corruption(
> > TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
> > RTE_CRYPTO_OP_STATUS_SUCCESS,
> > "authentication not failed");
> > - } else {
> > + } else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 0, 0);
> > + else {
> > ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > TEST_ASSERT_NULL(ut_params->op, "authentication not
> > failed");
> > @@ -11021,6 +11353,9 @@ test_authenticated_encryt_with_esn(
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 0, 0);
> > else
> > ut_params->op = process_crypto_request(
> > ts_params->valid_devs[0], ut_params->op);
> > @@ -11141,6 +11476,9 @@ test_authenticated_decrypt_with_esn(
> > if (gbl_action_type == RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_crypt_auth_op(ts_params->valid_devs[0],
> > ut_params->op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 1, 1, 0, 0);
> > else
> > ut_params->op = process_crypto_request(ts_params-
> > >valid_devs[0],
> > ut_params->op);
> > @@ -11285,6 +11623,9 @@ test_authenticated_encryption_SGL(const
> struct
> > aead_test_data *tdata,
> > unsigned int sgl_in = fragsz < tdata->plaintext.len;
> > unsigned int sgl_out = (fragsz_oop ? fragsz_oop : fragsz) <
> > tdata->plaintext.len;
> > + /* Data path service does not support OOP */
> > + if (cryptodev_dp_test)
> > + return -ENOTSUP;
> > if (sgl_in && !sgl_out) {
> > if (!(dev_info.feature_flags &
> >
> > RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT))
> > @@ -11480,6 +11821,9 @@ test_authenticated_encryption_SGL(const
> struct
> > aead_test_data *tdata,
> > if (oop == IN_PLACE &&
> > gbl_action_type ==
> > RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)
> > process_cpu_aead_op(ts_params->valid_devs[0],
> ut_params-
> > >op);
> > + else if (cryptodev_dp_test)
> > + process_sym_hw_api_op(ts_params->valid_devs[0], 0,
> > + ut_params->op, 0, 0, 0, 0);
> > else
> > TEST_ASSERT_NOT_NULL(
> > process_crypto_request(ts_params->valid_devs[0],
> > @@ -13041,6 +13385,29 @@ test_cryptodev_nitrox(void)
> > return unit_test_suite_runner(&cryptodev_nitrox_testsuite);
> > }
> >
> > +static int
> > +test_qat_sym_direct_api(void /*argv __rte_unused, int argc
> __rte_unused*/)
> > +{
> > + int ret;
> > +
> > + gbl_driver_id = rte_cryptodev_driver_id_get(
> > + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
> > +
> > + if (gbl_driver_id == -1) {
> > + RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check that
> > both "
> > + "CONFIG_RTE_LIBRTE_PMD_QAT and
> > CONFIG_RTE_LIBRTE_PMD_QAT_SYM "
> > + "are enabled in config file to run this testsuite.\n");
> > + return TEST_SKIPPED;
> > + }
> > +
> > + cryptodev_dp_test = 1;
>
> Cryptodev_dp_test cannot be set blindly. You should check for feature flag
> of the device
> If the feature is supported or not.
>
> Can we also rename this flag as "test_raw_crypto_dp"
>
> > + ret = unit_test_suite_runner(&cryptodev_testsuite);
> > + cryptodev_dp_test = 0;
> > +
> > + return ret;
> > +}
> > +
> > +REGISTER_TEST_COMMAND(cryptodev_qat_sym_api_autotest,
> > test_qat_sym_direct_api);
>
> It would be better to name the test string as test_cryptodev_qat_raw_dp
>
> > REGISTER_TEST_COMMAND(cryptodev_qat_autotest,
> test_cryptodev_qat);
> > REGISTER_TEST_COMMAND(cryptodev_aesni_mb_autotest,
> > test_cryptodev_aesni_mb);
> > REGISTER_TEST_COMMAND(cryptodev_cpu_aesni_mb_autotest,
> > diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
> > index 41542e055..e4e4c7626 100644
> > --- a/app/test/test_cryptodev.h
> > +++ b/app/test/test_cryptodev.h
> > @@ -71,6 +71,8 @@
> > #define CRYPTODEV_NAME_CAAM_JR_PMD crypto_caam_jr
> > #define CRYPTODEV_NAME_NITROX_PMD crypto_nitrox_sym
> >
> > +extern int cryptodev_dp_test;
> > +
> > /**
> > * Write (spread) data from buffer to mbuf data
> > *
> > @@ -209,4 +211,9 @@ create_segmented_mbuf(struct rte_mempool
> > *mbuf_pool, int pkt_len,
> > return NULL;
> > }
> >
> > +void
> > +process_sym_hw_api_op(uint8_t dev_id, uint16_t qp_id, struct
> rte_crypto_op
> > *op,
> > + uint8_t is_cipher, uint8_t is_auth, uint8_t len_in_bits,
> > + uint8_t cipher_iv_len);
> > +
> > #endif /* TEST_CRYPTODEV_H_ */
> > diff --git a/app/test/test_cryptodev_blockcipher.c
> > b/app/test/test_cryptodev_blockcipher.c
> > index 221262341..311b34c15 100644
> > --- a/app/test/test_cryptodev_blockcipher.c
> > +++ b/app/test/test_cryptodev_blockcipher.c
> > @@ -462,25 +462,44 @@ test_blockcipher_one_case(const struct
> > blockcipher_test_case *t,
> > }
> >
> > /* Process crypto operation */
> > - if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
> > - snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
> > - "line %u FAILED: %s",
> > - __LINE__, "Error sending packet for encryption");
> > - status = TEST_FAILED;
> > - goto error_exit;
> > - }
> > + if (cryptodev_dp_test) {
> > + uint8_t is_cipher = 0, is_auth = 0;
> >
> > - op = NULL;
> > + if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_OOP) {
> > + RTE_LOG(DEBUG, USER1,
> > + "QAT direct API does not support OOP, Test
> > Skipped.\n");
> > + snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
> > "SKIPPED");
> > + status = TEST_SUCCESS;
> > + goto error_exit;
> > + }
> > + if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER)
> > + is_cipher = 1;
> > + if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH)
> > + is_auth = 1;
> >
> > - while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) == 0)
> > - rte_pause();
> > + process_sym_hw_api_op(dev_id, 0, op, is_cipher, is_auth, 0,
> > + tdata->iv.len);
> > + } else {
> > + if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
> > + snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
> > + "line %u FAILED: %s",
> > + __LINE__, "Error sending packet for
> > encryption");
> > + status = TEST_FAILED;
> > + goto error_exit;
> > + }
> >
> > - if (!op) {
> > - snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
> > - "line %u FAILED: %s",
> > - __LINE__, "Failed to process sym crypto op");
> > - status = TEST_FAILED;
> > - goto error_exit;
> > + op = NULL;
> > +
> > + while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) ==
> 0)
> > + rte_pause();
> > +
> > + if (!op) {
> > + snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
> > + "line %u FAILED: %s",
> > + __LINE__, "Failed to process sym crypto op");
> > + status = TEST_FAILED;
> > + goto error_exit;
> > + }
> > }
> >
> > debug_hexdump(stdout, "m_src(after):",
> > --
> > 2.20.1
