This patch adds Forward error correction(FEC) support for ethdev.
Introduce APIs which support query and config FEC information in
hardware.
Signed-off-by: Min Hu (Connor) <humi...@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.hu...@huawei.com>
Reviewed-by: Chengwen Feng <fengcheng...@huawei.com>
Reviewed-by: Chengchang Tang <tangchengch...@huawei.com>
---
v2->v3:
add function return value "-ENOTSUP" for API
---
lib/librte_ethdev/rte_ethdev.c | 50 +++++++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 75 +++++++++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev_core.h | 77 ++++++++++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev_version.map | 5 +++
4 files changed, 207 insertions(+)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 7858ad5..b7ac791 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -3642,6 +3642,56 @@ rte_eth_led_off(uint16_t port_id)
return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
}
+int
+rte_eth_fec_get_capability(uint16_t port_id, uint8_t *fec_cap)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->fec_get_capability)(dev,
+ fec_cap));
+}
+
+int
+rte_eth_fec_get(uint16_t port_id, enum rte_fec_mode *mode)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, mode));
+}
+
+int
+rte_eth_fec_set(uint16_t port_id, enum rte_fec_mode mode)
+{
+ struct rte_eth_dev *dev;
+ uint8_t fec_mode_mask;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ ret = rte_eth_fec_get_capability(port_id, &fec_mode_mask);
+ if (ret)
+ return ret;
+
+ /*
+ * Check whether the configured mode is within the FEC capability.
+ * If not, the configured mode will not be supported.
+ */
+ if (!(fec_mode_mask & (1U << (uint8_t)mode))) {
+ RTE_ETHDEV_LOG(ERR, "unsupported fec mode=%d\n", mode);
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, mode));
+}
+
/*
* Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
* an empty spot.
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 70295d7..c353480 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1511,6 +1511,17 @@ struct rte_eth_dcb_info {
struct rte_eth_dcb_tc_queue_mapping tc_queue;
};
+/**
+ * This enum indicates the possible (forward error correction)FEC modes
+ * of an ethdev port.
+ */
+enum rte_fec_mode {
+ ETH_FEC_NOFEC = 0, /**< FEC is off */
+ ETH_FEC_BASER, /**< FEC using common algorithm */
+ ETH_FEC_RS, /**< FEC using RS algorithm */
+ ETH_FEC_AUTO /**< FEC autonegotiation modes */
+};
+
#define RTE_ETH_ALL RTE_MAX_ETHPORTS
/* Macros to check for valid port */
@@ -3328,6 +3339,70 @@ int rte_eth_led_on(uint16_t port_id);
int rte_eth_led_off(uint16_t port_id);
/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fec_cap
+ * returns the FEC capability from the device, as follows:
+ * bit0: nofec
+ * bit1: baser
+ * bit2: rs
+ * bit3: auto
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * that operation.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get_capability(uint16_t port_id, uint8_t *fec_cap);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get current Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mode
+ * returns the FEC mode from the device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * that operation.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get(uint16_t port_id, enum rte_fec_mode *mode);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mode
+ * the FEC mode.
+ * @return
+ * - (0) if successful.
+ * - (-EINVAL) if the FEC mode is not valid.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_set(uint16_t port_id, enum rte_fec_mode mode);
+
+/**
* Get current status of the Ethernet link flow control for Ethernet device
*
* @param port_id
diff --git a/lib/librte_ethdev/rte_ethdev_core.h
b/lib/librte_ethdev/rte_ethdev_core.h
index 32407dd..df9e18a 100644
--- a/lib/librte_ethdev/rte_ethdev_core.h
+++ b/lib/librte_ethdev/rte_ethdev_core.h
@@ -604,6 +604,76 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
const struct rte_eth_hairpin_conf *hairpin_conf);
/**
+ * @internal
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param fec_cap
+ * returns the FEC capability from the device.
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, get FEC success.
+ * @retval -ENOTSUP
+ * operation is not supported.
+ * @retval -EIO
+ * device is removed.
+ * @retval -ENODEV
+ * Device is gone.
+ */
+typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
+ uint8_t *fec_cap);
+
+/**
+ * @internal
+ * Get Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param mode
+ * returns the FEC mode from the device.
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, get FEC success.
+ * @retval -ENOTSUP
+ * operation is not supported.
+ * @retval -EIO
+ * device is removed.
+ * @retval -ENODEV
+ * Device is gone.
+ */
+typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev, enum rte_fec_mode *mode);
+
+/**
+ * @internal
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param mode
+ * the FEC mode.
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, set FEC success.
+ * @retval -ENOTSUP
+ * operation is not supported.
+ * @retval -EIO
+ * device is removed.
+ * @retval -ENODEV
+ * Device is gone.
+ */
+typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, enum rte_fec_mode mode);
+
+/**
* @internal A structure containing the functions exported by an Ethernet
driver.
*/
struct eth_dev_ops {
@@ -752,6 +822,13 @@ struct eth_dev_ops {
/**< Set up device RX hairpin queue. */
eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
/**< Set up device TX hairpin queue. */
+
+ eth_fec_get_capability_t fec_get_capability;
+ /**< Get Forward Error Correction(FEC) capability; */
+ eth_fec_get_t fec_get;
+ /**< Get Forward Error Correction(FEC) mode; */
+ eth_fec_set_t fec_set;
+ /**< Set Forward Error Correction(FEC) mode; */
};
/**
diff --git a/lib/librte_ethdev/rte_ethdev_version.map
b/lib/librte_ethdev/rte_ethdev_version.map
index 1212a17..33cf5e4 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -241,6 +241,11 @@ EXPERIMENTAL {
__rte_ethdev_trace_rx_burst;
__rte_ethdev_trace_tx_burst;
rte_flow_get_aged_flows;
+
+ # added in 20.11
+ rte_eth_fec_get_capability;
+ rte_eth_fec_get;
+ rte_eth_fec_set;
};
INTERNAL {
--
2.7.4
