From: Akhil Goyal <akhil.go...@nxp.com>

add DES-CBC support for cipher_only, chain and ipsec protocol.

Signed-off-by: Hemant Agrawal <hemant.agra...@nxp.com>
Signed-off-by: Akhil Goyal <akhil.go...@nxp.com>
---
 doc/guides/cryptodevs/features/dpaa2_sec.ini |  3 ++-
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c  | 26 ++++++++++++++------
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h    | 22 ++++++++++++++++-
 3 files changed, 42 insertions(+), 9 deletions(-)

diff --git a/doc/guides/cryptodevs/features/dpaa2_sec.ini 
b/doc/guides/cryptodevs/features/dpaa2_sec.ini
index 3a88828b8..c31321d5d 100644
--- a/doc/guides/cryptodevs/features/dpaa2_sec.ini
+++ b/doc/guides/cryptodevs/features/dpaa2_sec.ini
@@ -24,6 +24,7 @@ AES CBC (256) = Y
 AES CTR (128) = Y
 AES CTR (192) = Y
 AES CTR (256) = Y
+DES CBC       = Y
 3DES CBC      = Y
 SNOW3G UEA2   = Y
 ZUC EEA3      = Y
@@ -52,4 +53,4 @@ AES GCM (256) = Y
 ;
 ; Supported Asymmetric algorithms of the 'dpaa2_sec' crypto driver.
 ;
-[Asymmetric]
\ No newline at end of file
+[Asymmetric]
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c 
b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 6aa2a36f3..69040ec6c 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -1879,19 +1879,19 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
                                                session->iv.length,
                                                session->dir);
                break;
-       case RTE_CRYPTO_CIPHER_AES_CTR:
-               cipherdata.algtype = OP_ALG_ALGSEL_AES;
-               cipherdata.algmode = OP_ALG_AAI_CTR;
-               session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CTR;
+       case RTE_CRYPTO_CIPHER_DES_CBC:
+               cipherdata.algtype = OP_ALG_ALGSEL_DES;
+               cipherdata.algmode = OP_ALG_AAI_CBC;
+               session->cipher_alg = RTE_CRYPTO_CIPHER_DES_CBC;
                bufsize = cnstr_shdsc_blkcipher(priv->flc_desc[0].desc, 1, 0,
                                                SHR_NEVER, &cipherdata,
                                                session->iv.length,
                                                session->dir);
                break;
-       case RTE_CRYPTO_CIPHER_3DES_CTR:
-               cipherdata.algtype = OP_ALG_ALGSEL_3DES;
+       case RTE_CRYPTO_CIPHER_AES_CTR:
+               cipherdata.algtype = OP_ALG_ALGSEL_AES;
                cipherdata.algmode = OP_ALG_AAI_CTR;
-               session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CTR;
+               session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CTR;
                bufsize = cnstr_shdsc_blkcipher(priv->flc_desc[0].desc, 1, 0,
                                                SHR_NEVER, &cipherdata,
                                                session->iv.length,
@@ -1915,6 +1915,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
        case RTE_CRYPTO_CIPHER_AES_F8:
        case RTE_CRYPTO_CIPHER_AES_ECB:
        case RTE_CRYPTO_CIPHER_3DES_ECB:
+       case RTE_CRYPTO_CIPHER_3DES_CTR:
        case RTE_CRYPTO_CIPHER_AES_XTS:
        case RTE_CRYPTO_CIPHER_ARC4:
        case RTE_CRYPTO_CIPHER_NULL:
@@ -2392,6 +2393,11 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
                cipherdata.algmode = OP_ALG_AAI_CBC;
                session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC;
                break;
+       case RTE_CRYPTO_CIPHER_DES_CBC:
+               cipherdata.algtype = OP_ALG_ALGSEL_DES;
+               cipherdata.algmode = OP_ALG_AAI_CBC;
+               session->cipher_alg = RTE_CRYPTO_CIPHER_DES_CBC;
+               break;
        case RTE_CRYPTO_CIPHER_AES_CTR:
                cipherdata.algtype = OP_ALG_ALGSEL_AES;
                cipherdata.algmode = OP_ALG_AAI_CTR;
@@ -2401,6 +2407,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
        case RTE_CRYPTO_CIPHER_ZUC_EEA3:
        case RTE_CRYPTO_CIPHER_NULL:
        case RTE_CRYPTO_CIPHER_3DES_ECB:
+       case RTE_CRYPTO_CIPHER_3DES_CTR:
        case RTE_CRYPTO_CIPHER_AES_ECB:
        case RTE_CRYPTO_CIPHER_KASUMI_F8:
                DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
@@ -2732,6 +2739,10 @@ dpaa2_sec_ipsec_proto_init(struct 
rte_crypto_cipher_xform *cipher_xform,
                cipherdata->algtype = OP_PCL_IPSEC_3DES;
                cipherdata->algmode = OP_ALG_AAI_CBC;
                break;
+       case RTE_CRYPTO_CIPHER_DES_CBC:
+               cipherdata->algtype = OP_PCL_IPSEC_DES;
+               cipherdata->algmode = OP_ALG_AAI_CBC;
+               break;
        case RTE_CRYPTO_CIPHER_AES_CTR:
                cipherdata->algtype = OP_PCL_IPSEC_AES_CTR;
                cipherdata->algmode = OP_ALG_AAI_CTR;
@@ -2742,6 +2753,7 @@ dpaa2_sec_ipsec_proto_init(struct rte_crypto_cipher_xform 
*cipher_xform,
        case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
        case RTE_CRYPTO_CIPHER_ZUC_EEA3:
        case RTE_CRYPTO_CIPHER_3DES_ECB:
+       case RTE_CRYPTO_CIPHER_3DES_CTR:
        case RTE_CRYPTO_CIPHER_AES_ECB:
        case RTE_CRYPTO_CIPHER_KASUMI_F8:
                DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h 
b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
index 528b64ef8..c1f95f280 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  *
  *   Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- *   Copyright 2016 NXP
+ *   Copyright 2016,2020 NXP
  *
  */
 
@@ -437,6 +437,26 @@ static const struct rte_cryptodev_capabilities 
dpaa2_sec_capabilities[] = {
                        }, }
                }, }
        },
+       {       /* DES CBC */
+               .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+               {.sym = {
+                       .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+                       {.cipher = {
+                               .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+                               .block_size = 8,
+                               .key_size = {
+                                       .min = 8,
+                                       .max = 8,
+                                       .increment = 0
+                               },
+                               .iv_size = {
+                                       .min = 8,
+                                       .max = 8,
+                                       .increment = 0
+                               }
+                       }, }
+               }, }
+       },
        {       /* 3DES CBC */
                .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
                {.sym = {
-- 
2.17.1

Reply via email to