Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.po...@intel.com>
Reviewed-by: Kevin Laatz <kevin.la...@intel.com>
---
v3: Added back in ieee1588 description.
---
doc/guides/testpmd_app_ug/run_app.rst | 6 +++---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 ++-------
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/run_app.rst
b/doc/guides/testpmd_app_ug/run_app.rst
index d1e4ee3e7a..ac4f0d9212 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -20,7 +20,7 @@ They must be separated from the EAL options, shown in the
previous section, with
.. code-block:: console
- sudo ./testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2
+ sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=2
The command line options are:
@@ -59,13 +59,13 @@ The command line options are:
* ``--nb-cores=N``
Set the number of forwarding cores,
- where 1 <= N <= "number of cores" or ``CONFIG_RTE_MAX_LCORE`` from the
configuration file.
+ where 1 <= N <= "number of cores" or ``RTE_MAX_LCORE`` from the
configuration file.
The default value is 1.
* ``--nb-ports=N``
Set the number of forwarding ports,
- where 1 <= N <= "number of ports" on the board or
``CONFIG_RTE_MAX_ETHPORTS`` from the configuration file.
+ where 1 <= N <= "number of ports" on the board or ``RTE_MAX_ETHPORTS``
from the configuration file.
The default value is the number of ports on the board.
* ``--coremask=0xXX``
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 90cf252df5..6856e3b909 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -71,7 +71,7 @@ practical or possible testpmd supports alternative methods
for executing command
.. code-block:: console
- ./testpmd -n4 -r2 ... -- -i
--cmdline-file=/home/ubuntu/flow-create-commands.txt
+ ./dpdk-testpmd -n4 -r2 ... -- -i
--cmdline-file=/home/ubuntu/flow-create-commands.txt
Interactive-mode selected
CLI commands to be read from /home/ubuntu/flow-create-commands.txt
Configuring Port 0 (socket 0)
@@ -329,7 +329,7 @@ The available information categories are:
* ``icmpecho``: Receives a burst of packets, lookup for ICMP echo requests
and, if any, send back ICMP echo replies.
-* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX.
Requires ``CONFIG_RTE_LIBRTE_IEEE1588=y``.
+* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX.
* ``noisy``: Noisy neighbor simulation.
Simulate more realistic behavior of a guest machine engaged in receiving
@@ -379,11 +379,6 @@ Example for the io forwarding engine, with some packet
drops on the tx side::
TX-packets: 548595568 TX-dropped: 128 TX-total: 548595696
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-.. note::
-
- Enabling CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES appends "CPU cycles/packet"
stats, like:
-
- CPU cycles/packet=xx.dd (total cycles=xxxx / total RX packets=xxxx) at xxx
MHz clock
clear fwd
~~~~~~~~~
--
2.17.1
