Any comments?

On 2015/1/15 22:45, Qiu, Michael wrote:
> For ixgbe, when queue start failure, for example, mbuf allocate
> failure, the device will still start success, which could be
> an issue.
>
> Add return status check of queue start to avoid this issue.
>
> Signed-off-by: Michael Qiu <michael.qiu at intel.com>
> ---
>  lib/librte_pmd_ixgbe/ixgbe_ethdev.c |  6 +++++-
>  lib/librte_pmd_ixgbe/ixgbe_ethdev.h |  2 +-
>  lib/librte_pmd_ixgbe/ixgbe_rxtx.c   | 22 +++++++++++++++++-----
>  3 files changed, 23 insertions(+), 7 deletions(-)
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c 
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> index 3fc3738..59e3321 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> @@ -1491,7 +1491,11 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
>               goto error;
>       }
>  
> -     ixgbe_dev_rxtx_start(dev);
> +     err = ixgbe_dev_rxtx_start(dev);
> +     if (err < 0) {
> +             PMD_INIT_LOG(ERR, "Unable to start rxtx queues\n");
> +             goto error;
> +     }
>  
>       if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) {
>               err = hw->mac.ops.setup_sfp(hw);
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h 
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> index ca99170..7461450 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> @@ -251,7 +251,7 @@ int ixgbe_dev_rx_init(struct rte_eth_dev *dev);
>  
>  void ixgbe_dev_tx_init(struct rte_eth_dev *dev);
>  
> -void ixgbe_dev_rxtx_start(struct rte_eth_dev *dev);
> +int ixgbe_dev_rxtx_start(struct rte_eth_dev *dev);
>  
>  int ixgbe_dev_rx_queue_start(struct rte_eth_dev *dev, uint16_t rx_queue_id);
>  
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c 
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index e10d6a2..41a930e 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -3744,7 +3744,7 @@ ixgbe_setup_loopback_link_82599(struct ixgbe_hw *hw)
>  /*
>   * Start Transmit and Receive Units.
>   */
> -void
> +int
>  ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>  {
>       struct ixgbe_hw     *hw;
> @@ -3754,6 +3754,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>       uint32_t dmatxctl;
>       uint32_t rxctrl;
>       uint16_t i;
> +     int ret = 0;
>  
>       PMD_INIT_FUNC_TRACE();
>       hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> @@ -3776,14 +3777,24 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>  
>       for (i = 0; i < dev->data->nb_tx_queues; i++) {
>               txq = dev->data->tx_queues[i];
> -             if (!txq->tx_deferred_start)
> -                     ixgbe_dev_tx_queue_start(dev, i);
> +             if (!txq->tx_deferred_start) {
> +                     ret = ixgbe_dev_tx_queue_start(dev, i);
> +                     if (ret < 0) {
> +                             PMD_INIT_LOG(ERR, "Start tx queue failed\n");
> +                             return ret;
> +                     }
> +             }
>       }
>  
>       for (i = 0; i < dev->data->nb_rx_queues; i++) {
>               rxq = dev->data->rx_queues[i];
> -             if (!rxq->rx_deferred_start)
> -                     ixgbe_dev_rx_queue_start(dev, i);
> +             if (!rxq->rx_deferred_start) {
> +                     ret = ixgbe_dev_rx_queue_start(dev, i);
> +                     if (ret < 0) {
> +                             PMD_INIT_LOG(ERR, "Start rx queue failed\n");
> +                             return ret;
> +                     }
> +             }
>       }
>  
>       /* Enable Receive engine */
> @@ -3798,6 +3809,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>                       dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
>               ixgbe_setup_loopback_link_82599(hw);
>  
> +     return 0;
>  }
>  
>  /*

Reply via email to