> -----Original Message-----
> From: dev <dev-boun...@dpdk.org> On Behalf Of Ferruh Yigit
> Sent: Monday, June 22, 2020 19:59
> To: Sun, GuinanX <guinanx....@intel.com>; dev@dpdk.org
> Cc: Mateusz Kowalski <mateusz.kowal...@intel.com>
> Subject: Re: [dpdk-dev] [PATCH 02/21] net/ixgbe/base: change in the
> condition for response HI
Don't use HI, please follow Ferruh's comments
>
> On 6/12/2020 4:23 AM, Guinan Sun wrote:
> > According to SGVL EAS Host interface Shadow RAM Read (0x31) command
> > response buffer length is stored in two bytes, instead of one byte.
>
> For patch subject, better to say 'fix' instead of 'change' because that is
> what
> done.
> Previously Shadow RAM Read (0x31) command response buffer length was
> taken wrong, now you are fixing it. Overall "Shadow RAM Read (0x31)"
> command response value was wrong, so I guess it can be fair to say:
> "net/ixgbe/base: fix host interface shadow RAM read"
>
> >
> > Signed-off-by: Mateusz Kowalski <mateusz.kowal...@intel.com>
> > Signed-off-by: Guinan Sun <guinanx....@intel.com>
> > ---
> > drivers/net/ixgbe/base/ixgbe_common.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ixgbe/base/ixgbe_common.c
> > b/drivers/net/ixgbe/base/ixgbe_common.c
> > index 36c003844..9e3b71e38 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_common.c
> > +++ b/drivers/net/ixgbe/base/ixgbe_common.c
> > @@ -4656,7 +4656,7 @@ s32 ixgbe_host_interface_command(struct
> ixgbe_hw *hw, u32 *buffer,
> > * Read Flash command requires reading buffer length from
> > * two byes instead of one byte
> > */
> > - if (resp->cmd == 0x30) {
> > + if (resp->cmd == 0x30 || resp->cmd == 0x31) {
> > for (; bi < dword_len + 2; bi++) {
> > buffer[bi] = IXGBE_READ_REG_ARRAY(hw,
> IXGBE_FLEX_MNG,
> > bi);
> >
