> -----Original Message-----
> From: Raslan Darawsheh <rasl...@mellanox.com>
> Sent: Tuesday, May 5, 2020 12:42
> To: Slava Ovsiienko <viachesl...@mellanox.com>; Matan Azrad
> <ma...@mellanox.com>
> Cc: dev@dpdk.org; Ori Kam <or...@mellanox.com>; sta...@dpdk.org
> Subject: [PATCH] net/mlx5: fix matching for UDP tunnels with verbs
>
> When creating flow rule with zero specs it will cause matching all UDP
> packets like following:
> eth / ipv4 / udp / vxlan / end
> Such rule will match all udp packets.
>
> This change the behavior to match the dv flow engine which will
> automatically set the match on relative outer UDP port if the user didn't
> specify any.
>
> Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Raslan Darawsheh <rasl...@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viachesl...@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow_verbs.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_verbs.c
> b/drivers/net/mlx5/mlx5_flow_verbs.c
> index 7efd97f54..9094fb70b 100644
> --- a/drivers/net/mlx5/mlx5_flow_verbs.c
> +++ b/drivers/net/mlx5/mlx5_flow_verbs.c
> @@ -680,6 +680,26 @@ flow_verbs_translate_item_udp(struct mlx5_flow
> *dev_flow,
> udp.val.src_port &= udp.mask.src_port;
> udp.val.dst_port &= udp.mask.dst_port;
> }
> +
> + if ((item + 1) != NULL && !(udp.val.dst_port & udp.mask.dst_port)) {
> + switch((item + 1)->type) {
> + case RTE_FLOW_ITEM_TYPE_VXLAN:
> + udp.val.dst_port =
> htons(MLX5_UDP_PORT_VXLAN);
> + udp.mask.dst_port = 0xffff;
> + break;
> + case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
> + udp.val.dst_port =
> htons(MLX5_UDP_PORT_VXLAN_GPE);
> + udp.mask.dst_port = 0xffff;
> + break;
> + case RTE_FLOW_ITEM_TYPE_MPLS:
> + udp.val.dst_port =
> htons(MLX5_UDP_PORT_MPLS);
> + udp.mask.dst_port = 0xffff;
> + break;
> + default:
> + break;
> + }
> + }
> +
> flow_verbs_spec_add(&dev_flow->verbs, &udp, size); }
>
> --
> 2.26.0
