Hi,
On Fri, May 01, 2020 at 04:48:21PM +0530, Jerin Jacob wrote:
> On Fri, Apr 17, 2020 at 12:53 PM Nithin Dabilpuram
> <nithind1...@gmail.com> wrote:
> >
> > From: Nithin Dabilpuram <ndabilpu...@marvell.com>
> >
> > Introduce PKT_TX_MARK_IP_DSCP, PKT_TX_MARK_IP_ECN
> > and PKT_TX_MARK_VLAN_DEI Tx offload flags to support
> > packet marking.
> >
> > When packet marking feature in Traffic manager is enabled,
> > application has to the use the three new flags to indicate
> > to PMD on whether packet marking needs to be enabled on the
> > specific mbuf or not. By setting the three flags, it is
> > assumed by PMD that application has already verified the
> > applicability of marking on that specific packet and
> > PMD need not perform further checks as per RFC.
> >
> > Signed-off-by: Krzysztof Kanas <kka...@marvell.com>
> > Signed-off-by: Nithin Dabilpuram <ndabilpu...@marvell.com>
>
> None of the ethdev TM driver implementations has supported packet
> marking support.
> rte_tm and rte_mbuf maintainers(Christian, Oliver), Could you review this
> patch?
As you know, the number of mbuf flags is limited (only 18 bits are
remaining), so I think we should use them with care, i.e. for features
that are generic enough.
>From what I understand, this feature is bound to octeontx2, so using a
mbuf dynamic flag would make more sense here. There are some examples in
dpdk repository, just grep for "dynflag".
Also, I think that the feature availability should be advertised through
an ethdev offload, so an application can know at initialization time
that these flags can be used.
Regards,
Olivier
>
>
> > ---
> > doc/guides/nics/features.rst | 14 ++++++++++++++
> > lib/librte_mbuf/rte_mbuf.c | 6 ++++++
> > lib/librte_mbuf/rte_mbuf_core.h | 36 ++++++++++++++++++++++++++++++++++--
> > 3 files changed, 54 insertions(+), 2 deletions(-)
> >
> > diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> > index edd21c4..bc978fb 100644
> > --- a/doc/guides/nics/features.rst
> > +++ b/doc/guides/nics/features.rst
> > @@ -913,6 +913,20 @@ Supports to get Rx/Tx packet burst mode information.
> > * **[implements] eth_dev_ops**: ``rx_burst_mode_get``,
> > ``tx_burst_mode_get``.
> > * **[related] API**: ``rte_eth_rx_burst_mode_get()``,
> > ``rte_eth_tx_burst_mode_get()``.
> >
> > +.. _nic_features_traffic_manager_packet_marking_offload:
> > +
> > +Traffic Manager Packet marking offload
> > +--------------------------------------
> > +
> > +Supports enabling a packet marking offload specific mbuf.
> > +
> > +* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_MARK_IP_DSCP``,
> > + ``mbuf.ol_flags:PKT_TX_MARK_IP_ECN``,
> > ``mbuf.ol_flags:PKT_TX_MARK_VLAN_DEI``,
> > + ``mbuf.ol_flags:PKT_TX_IPV4``, ``mbuf.ol_flags:PKT_TX_IPV6``.
> > +* **[uses] mbuf**: ``mbuf.l2_len``.
> > +* **[related] API**: ``rte_tm_mark_ip_dscp()``, ``rte_tm_mark_ip_ecn()``,
> > + ``rte_tm_mark_vlan_dei()``.
> > +
> > .. _nic_features_other:
> >
> > Other dev ops not represented by a Feature
> > diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
> > index cd5794d..5c6896d 100644
> > --- a/lib/librte_mbuf/rte_mbuf.c
> > +++ b/lib/librte_mbuf/rte_mbuf.c
> > @@ -880,6 +880,9 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask)
> > case PKT_TX_SEC_OFFLOAD: return "PKT_TX_SEC_OFFLOAD";
> > case PKT_TX_UDP_SEG: return "PKT_TX_UDP_SEG";
> > case PKT_TX_OUTER_UDP_CKSUM: return "PKT_TX_OUTER_UDP_CKSUM";
> > + case PKT_TX_MARK_VLAN_DEI: return "PKT_TX_MARK_VLAN_DEI";
> > + case PKT_TX_MARK_IP_DSCP: return "PKT_TX_MARK_IP_DSCP";
> > + case PKT_TX_MARK_IP_ECN: return "PKT_TX_MARK_IP_ECN";
> > default: return NULL;
> > }
> > }
> > @@ -916,6 +919,9 @@ rte_get_tx_ol_flag_list(uint64_t mask, char *buf,
> > size_t buflen)
> > { PKT_TX_SEC_OFFLOAD, PKT_TX_SEC_OFFLOAD, NULL },
> > { PKT_TX_UDP_SEG, PKT_TX_UDP_SEG, NULL },
> > { PKT_TX_OUTER_UDP_CKSUM, PKT_TX_OUTER_UDP_CKSUM, NULL },
> > + { PKT_TX_MARK_VLAN_DEI, PKT_TX_MARK_VLAN_DEI, NULL },
> > + { PKT_TX_MARK_IP_DSCP, PKT_TX_MARK_IP_DSCP, NULL },
> > + { PKT_TX_MARK_IP_ECN, PKT_TX_MARK_IP_ECN, NULL },
> > };
> > const char *name;
> > unsigned int i;
> > diff --git a/lib/librte_mbuf/rte_mbuf_core.h
> > b/lib/librte_mbuf/rte_mbuf_core.h
> > index b9a59c8..d9f1290 100644
> > --- a/lib/librte_mbuf/rte_mbuf_core.h
> > +++ b/lib/librte_mbuf/rte_mbuf_core.h
> > @@ -187,11 +187,40 @@ extern "C" {
> > /* add new RX flags here, don't forget to update PKT_FIRST_FREE */
> >
> > #define PKT_FIRST_FREE (1ULL << 23)
> > -#define PKT_LAST_FREE (1ULL << 40)
> > +#define PKT_LAST_FREE (1ULL << 37)
> >
> > /* add new TX flags here, don't forget to update PKT_LAST_FREE */
> >
> > /**
> > + * Packet marking offload flags. These flags indicated what kind
> > + * of packet marking needs to be applied on a given mbuf when
> > + * appropriate Traffic Manager configuration is in place.
> > + * When user set's these flags on a mbuf, below assumptions are made
> > + * 1) When PKT_TX_MARK_VLAN_DEI is set,
> > + * a) PMD assumes pkt to be a 802.1q packet.
> > + * b) Application should also set mbuf.l2_len where 802.1Q header is
> > + * at (mbuf.l2_len - 6) offset.
> > + * 2) When PKT_TX_MARK_IP_DSCP is set,
> > + * a) Application should also set either PKT_TX_IPV4 or PKT_TX_IPV6
> > + * to indicate whether if it is IPv4 packet or IPv6 packet
> > + * for DSCP marking. It should also set PKT_TX_IP_CKSUM if it is
> > + * IPv4 pkt.
> > + * b) Application should also set mbuf.l2_len that indicates
> > + * start offset of L3 header.
> > + * 3) When PKT_TX_MARK_IP_ECN is set,
> > + * a) Application should also set either PKT_TX_IPV4 or PKT_TX_IPV6.
> > + * It should also set PKT_TX_IP_CKSUM if it is IPv4 pkt.
> > + * b) PMD will assume pkt L4 protocol is either TCP or SCTP and
> > + * ECN is set to 2'b01 or 2'b10 as per RFC 3168 and hence HW
> > + * can mark the packet for a configured color.
> > + * c) Application should also set mbuf.l2_len that indicates
> > + * start offset of L3 header.
> > + */
> > +#define PKT_TX_MARK_VLAN_DEI (1ULL << 38)
> > +#define PKT_TX_MARK_IP_DSCP (1ULL << 39)
> > +#define PKT_TX_MARK_IP_ECN (1ULL << 40)
> > +
> > +/**
> > * Outer UDP checksum offload flag. This flag is used for enabling
> > * outer UDP checksum in PMD. To use outer UDP checksum, the user needs to
> > * 1) Enable the following in mbuf,
> > @@ -384,7 +413,10 @@ extern "C" {
> > PKT_TX_MACSEC | \
> > PKT_TX_SEC_OFFLOAD | \
> > PKT_TX_UDP_SEG | \
> > - PKT_TX_OUTER_UDP_CKSUM)
> > + PKT_TX_OUTER_UDP_CKSUM | \
> > + PKT_TX_MARK_VLAN_DEI | \
> > + PKT_TX_MARK_IP_DSCP | \
> > + PKT_TX_MARK_IP_ECN)
> >
> > /**
> > * Mbuf having an external buffer attached. shinfo in mbuf must be filled.
> > --
> > 2.8.4
> >
