Hi Xiaoyu,
> -----Original Message-----
> From: Xiaoyu Min <jack...@mellanox.com>
> Sent: Wednesday, April 15, 2020 2:49 PM
> To: tho...@monjalon.net; as...@mellanox.com; Lu, Wenzhuo
> <wenzhuo...@intel.com>; Wu, Jingjing <jingjing...@intel.com>; Iremonger,
> Bernard <bernard.iremon...@intel.com>; Mcnamara, John
> <john.mcnam...@intel.com>; Kovacevic, Marko
> <marko.kovace...@intel.com>
> Cc: dev@dpdk.org
> Subject: [RFC] app/testpmd: add generic swap forwarding engine
>
> This RFC propose a generic `swap` forwarding engine, which could be seen as
> an extension of existing `macswap` but provide more flexibility.
>
> With this generic `swap` forwarding engine, we can `swap` the source and
> destination of L2/L3 address as well as the source and destination port of L4
> according to the user inputs.
>
> This will be very helpful for developer/tester in some test scenarios.
> For example, connection tracking functinality in OVS, which needs to swap
> UDP ports in addition to L2/L3 addresses in order to complete one
> connection.
>
> Signed-off-by: Xiaoyu Min <jack...@mellanox.com>
> ---
> app/test-pmd/parameters.c | 2 ++
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 15 ++++++++++++++-
> 2 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
> 404dba2b20..5c9aecd6cb 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -147,6 +147,8 @@ usage(char* progname)
> "is default).\n");
> printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
> list_pkt_forwarding_modes());
> + printf(" --forward-mode=swap[:TYPE[,TYPE]]: set forwarding mode
> to swap "
> + "(TYPE: auto (default) or mac or ip or tp).\n");
> printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
> printf(" --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
> printf(" --rxq=N: set the number of RX queues per port to N.\n");
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index dcee5de455..27f0600493 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -298,7 +298,7 @@ set fwd
> Set the packet forwarding mode::
>
> testpmd> set fwd (io|mac|macswap|flowgen| \
> - rxonly|txonly|csum|icmpecho|noisy) (""|retry)
> + rxonly|txonly|csum|icmpecho|noisy|swap) (""|retry)
>
> ``retry`` can be specified for forwarding engines except ``rx_only``.
>
> @@ -336,6 +336,19 @@ The available information categories are:
> Simulate more realistic behavior of a guest machine engaged in receiving
> and sending packets performing Virtual Network Function (VNF).
>
> +* ``swap[:TYPE[,TYPE]*]``: Generic swap forwarding mode.
> +
> + Swap the source and destination address or/and source and destination
> port of packet according to ``TYPE`` before forwarding them.
> + ``TYPE`` could be:
> +
> + - ``auto``: swaps all supported fields (L2 to L4) if available, default.
> +
> + - ``mac``: swaps the source address and destination address of Ethernet, as
> same as ``macswap``.
> +
> + - ``ip``: swaps the source address and destination address of IP (v4 and
> v6).
> +
> + - ``tp``: swaps the source port and destination port of transport layer
> (TCP
> and UDP).
> +
> Example::
>
> testpmd> set fwd rxonly
> --
> 2.26.0
This patch is giving the following checkpatch errors:
root@silpixa00399470:~/dpdk-next-net#
/root/dpdk-next-net/devtools/checkpatches.sh
/home/bairemon/patches_20_05_patchwork/RFC-app-testpmd-add-generic-swap-forwarding-engine
.patch
### [dpdk-dev] [RFC] app/testpmd: add generic swap forwarding engine
ERROR:TRAILING_WHITESPACE: trailing whitespace
#97: FILE: doc/guides/testpmd_app_ug/testpmd_funcs.rst:340:
+ $
ERROR:TRAILING_WHITESPACE: trailing whitespace
#102: FILE: doc/guides/testpmd_app_ug/testpmd_funcs.rst:345:
+ $
ERROR:TRAILING_WHITESPACE: trailing whitespace
#104: FILE: doc/guides/testpmd_app_ug/testpmd_funcs.rst:347:
+ $
ERROR:TRAILING_WHITESPACE: trailing whitespace
#106: FILE: doc/guides/testpmd_app_ug/testpmd_funcs.rst:349:
+ $
total: 4 errors, 0 warnings, 35 lines checked
This seems to be just a documentation patch.
I don't see any code to implement the new forwarding feature.
Regards,
Bernard.
