Provide a descriptin of a newly added mprq_log_stride_size devarg parameter for specifying a stride size in case of MPRQ Rx is on.
Signed-off-by: Alexander Kozyrev <akozy...@mellanox.com> --- doc/guides/nics/mlx5.rst | 9 +++++++++ doc/guides/rel_notes/release_20_05.rst | 1 + 2 files changed, 10 insertions(+) diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index e13c07d..4e8c130 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -434,6 +434,15 @@ Run-time configuration The size of Rx queue should be bigger than the number of strides. +- ``mprq_log_stride_size`` parameter [int] + + Log 2 of the size of a stride for Multi-Packet Rx queue. Configuring a smaller + stride size can save some memory and reduce probability of a depletion of all + available strides due to unreleased packets by an application. If configured + value is not in the range of device capability, the default value will be set + with a warning message. The default value is 11 which is 2048 bytes per a + stride, valid only if ``mprq_en`` is set. + - ``mprq_max_memcpy_len`` parameter [int] The maximum length of packet to memcpy in case of Multi-Packet Rx queue. Rx diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst index c960fd2..1459218 100644 --- a/doc/guides/rel_notes/release_20_05.rst +++ b/doc/guides/rel_notes/release_20_05.rst @@ -62,6 +62,7 @@ New Features * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit. * Added support for creating Relaxed Ordering Memory Regions. + * Added support for 9000 MTU in Multi-Packet RQ mode. Removed Items ------------- -- 1.8.3.1
