Hi, It seems after applying below patch, 2nd parameter of PMD initialization code can be NULL when vdev option is like below.
---------------- commit c07691ae10894bb6bf284fed75829b95844eacdb devargs: remove limit on parameters length ---------------- Here is example vdev option --vdev 'eth_name0' (No option after driver name case) It seems some PMDs assumes 2nd parameter will be always not NULL, even if there is no option after driver name. For example, before applying the patch, here is a log of bond PMD. $ sudo ./x86_64-native-linuxapp-gcc/app/testpmd -c f -n 1 --vdev 'eth_bond0' -- -i EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Support maximum 128 logical core(s) by configuration. EAL: Detected 8 lcore(s) EAL: VFIO modules not all loaded, skip VFIO support... EAL: Setting up memory... EAL: Ask a virtual area of 0x280000000 bytes EAL: Virtual area found at 0x7ffd40000000 (size = 0x280000000) EAL: Requesting 10 pages of size 1024MB from socket 0 EAL: TSC frequency is ~3991438 KHz EAL: Master core 0 is ready (tid=f7fd6840) EAL: Initializing pmd_bond for eth_bond0 EAL: Mode must be specified only once for bonded device eth_bond0 PMD: ENICPMD trace: rte_enic_pmd_init EAL: Core 3 is ready (tid=f58e0700) EAL: Core 2 is ready (tid=f60e1700) EAL: Core 1 is ready (tid=f68e2700) EAL: PCI device 0000:02:00.0 on NUMA socket -1 EAL: probe driver: 8086:10b9 rte_em_pmd EAL: 0000:02:00.0 not managed by UIO driver, skipping EAL: Error - exiting with code: 1 Cause: No probed ethernet device After applying. $ sudo ./x86_64-native-linuxapp-gcc/app/testpmd -c f -n 1 --vdev 'eth_bond0' -- -i EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Support maximum 128 logical core(s) by configuration. EAL: Detected 8 lcore(s) EAL: VFIO modules not all loaded, skip VFIO support... EAL: Setting up memory... EAL: Ask a virtual area of 0x280000000 bytes EAL: Virtual area found at 0x7ffd40000000 (size = 0x280000000) EAL: Requesting 10 pages of size 1024MB from socket 0 EAL: TSC frequency is ~3991439 KHz EAL: Master core 0 is ready (tid=f7fd6840) EAL: Initializing pmd_bond for eth_bond0 $ It seems error is returned in PMD code. I am not sure this is an issue. But just in case I report it, because behavior is changed. Thanks, Tetsuya
