v4 changes
- Export interrupt enable/disable functions for shared libraries
- Put new functions at the end of eth_dev_ops to avoid breaking ABI
v3 changes
- Add return value for interrupt enable/disable functions
Add two dev_ops functions to enable and disable rx queue interrupts
Signed-off-by: Danny Zhou <danny.zhou at intel.com>
Tested-by: Yong Liu <yong.liu at intel.com>
---
lib/librte_ether/rte_ethdev.c | 43 +++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.h | 59 ++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ether_version.map | 2 ++
3 files changed, 104 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index ea3a1fb..d27469a 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2825,6 +2825,49 @@ _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
}
rte_spinlock_unlock(&rte_eth_dev_cb_lock);
}
+
+int
+rte_eth_dev_rx_queue_intr_enable(uint8_t port_id,
+ uint16_t queue_id)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ if (dev == NULL) {
+ PMD_DEBUG_TRACE("Invalid port device\n");
+ return (-ENODEV);
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_enable, -ENOTSUP);
+ return (*dev->dev_ops->rx_queue_intr_enable)(dev, queue_id);
+}
+
+int
+rte_eth_dev_rx_queue_intr_disable(uint8_t port_id,
+ uint16_t queue_id)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ if (dev == NULL) {
+ PMD_DEBUG_TRACE("Invalid port device\n");
+ return (-ENODEV);
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable, -ENOTSUP);
+ return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
+}
+
#ifdef RTE_NIC_BYPASS
int rte_eth_dev_bypass_init(uint8_t port_id)
{
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 84160c3..43035c2 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -848,6 +848,8 @@ struct rte_eth_fdir {
struct rte_intr_conf {
/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
uint16_t lsc;
+ /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
+ uint16_t rxq;
};
/**
@@ -1109,6 +1111,14 @@ typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev
*dev,
const struct rte_eth_txconf *tx_conf);
/**< @internal Setup a transmit queue of an Ethernet device. */
+typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
+
typedef void (*eth_queue_release_t)(void *queue);
/**< @internal Release memory resources allocated by given RX/TX queue. */
@@ -1520,6 +1530,10 @@ struct eth_dev_ops {
eth_remove_flex_filter_t remove_flex_filter; /**< remove flex
filter. */
eth_get_flex_filter_t get_flex_filter; /**< get flex
filter. */
eth_filter_ctrl_t filter_ctrl; /**< common filter
control*/
+
+ /** Enable/disable Rx queue interrupt. */
+ eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue
interrupt. */
+ eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue
interrupt.*/
};
/**
@@ -2811,6 +2825,51 @@ void _rte_eth_dev_callback_process(struct rte_eth_dev
*dev,
enum rte_eth_event_type event);
/**
+ * When there is no rx packet coming in Rx Queue for a long time, we can
+ * sleep lcore related to RX Queue for power saving, and enable rx interrupt
+ * to be triggered when rx packect arrives.
+ *
+ * The rte_eth_dev_rx_queue_intr_enable() function enables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_queue_intr_enable(uint8_t port_id,
+ uint16_t queue_id);
+
+/**
+ * When lcore wakes up from rx interrupt indicating packet coming, disable rx
+ * interrupt and returns to polling mode.
+ *
+ * The rte_eth_dev_rx_queue_intr_disable() function disables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_queue_intr_disable(uint8_t port_id,
+ uint16_t queue_id);
+
+/**
* Turn on the LED on the Ethernet device.
* This function turns on the LED on the Ethernet device.
*
diff --git a/lib/librte_ether/rte_ether_version.map
b/lib/librte_ether/rte_ether_version.map
index 7316530..1e7af6e 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -57,6 +57,8 @@ DPDK_2.0 {
rte_eth_dev_rss_hash_update;
rte_eth_dev_rss_reta_query;
rte_eth_dev_rss_reta_update;
+ rte_eth_dev_rx_queue_intr_disable;
+ rte_eth_dev_rx_queue_intr_enable;
rte_eth_dev_rx_queue_start;
rte_eth_dev_rx_queue_stop;
rte_eth_dev_set_link_down;
--
1.8.1.4
