+Jiang Yu
BR,
Zhu, Tao
> -----Original Message-----
> From: Zhu, TaoX
> Sent: Tuesday, March 3, 2020 10:00 AM
> To: Ananyev, Konstantin <konstantin.anan...@intel.com>; Lu, Wenzhuo
> <wenzhuo...@intel.com>; Ye, Xiaolong <xiaolong...@intel.com>
> Cc: dev@dpdk.org; sta...@dpdk.org
> Subject: RE: [PATCH] net/ixgbe: fix link status inconsistencies
>
> +Xiaolong
>
> BR,
> Zhu, Tao
>
> > -----Original Message-----
> > From: Zhu, TaoX
> > Sent: Wednesday, February 26, 2020 8:07 PM
> > To: Ananyev, Konstantin <konstantin.anan...@intel.com>; Lu, Wenzhuo
> > <wenzhuo...@intel.com>
> > Cc: dev@dpdk.org; Zhu, TaoX <taox....@intel.com>; sta...@dpdk.org
> > Subject: [PATCH] net/ixgbe: fix link status inconsistencies
> >
> > From: Zhu Tao <taox....@intel.com>
> >
> > Setting LINK UP or LINK DOWN is divided into two parts, with the main
> > task done in a separate thread, which can take up to 9 seconds. If
> > cancel the thread in execution, may cause state inconsistencies.
> > Therefore, must wait for the previous setting to exit normally before
> setting the new state.
> >
> > Note: before using threads, use alarm to handle main tasks.
> > When canceling alarm, the execution of alarm will not be interrupted.
> >
> > Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
> > Cc: sta...@dpdk.org
> >
> > Signed-off-by: Zhu Tao <taox....@intel.com>
> > ---
> > drivers/net/ixgbe/ixgbe_ethdev.c | 24 ++++++++++++++++++++++--
> > 1 file changed, 22 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > index 23b3f5b0c..2c5797635 100644
> > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > @@ -4143,16 +4143,35 @@ ixgbevf_check_link(struct ixgbe_hw *hw,
> > ixgbe_link_speed *speed,
> > return ret_val;
> > }
> >
> > +/* return 1: setup complete, return 0: setup not complete, and wait
> > +timeout*/ static int ixgbe_dev_wait_setup_link_complete(struct
> > +rte_eth_dev *dev) { #define DELAY_INTERVAL 100 /* 100ms */
> > +#define MAX_TIMEOUT 90 /* 9s (90 * 100ms) in total */
> > + struct ixgbe_adapter *ad = dev->data->dev_private;
> > + int timeout = MAX_TIMEOUT;
> > +
> > + while (rte_atomic32_read(&ad->link_thread_running) && timeout) {
> > + msec_delay(DELAY_INTERVAL);
> > + timeout--;
> > + }
> > +
> > +
> > + return !!timeout;
> > +}
> > +
> > static void
> > ixgbe_dev_cancel_link_thread(struct rte_eth_dev *dev) {
> > struct ixgbe_adapter *ad = dev->data->dev_private;
> > void *retval;
> >
> > - if (rte_atomic32_read(&ad->link_thread_running)) {
> > + if (!ixgbe_dev_wait_setup_link_complete(dev)) {
> > pthread_cancel(ad->link_thread_tid);
> > pthread_join(ad->link_thread_tid, &retval);
> > rte_atomic32_clear(&ad->link_thread_running);
> > + PMD_DRV_LOG(ERR, "Link thread not complete, cancel it!");
> > }
> > }
> >
> > @@ -4263,7 +4282,8 @@ ixgbe_dev_link_update_share(struct
> rte_eth_dev
> > *dev,
> > if (link_up == 0) {
> > if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber)
> {
> > intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
> > - if (rte_atomic32_test_and_set(&ad-
> > >link_thread_running)) {
> > + if (ixgbe_dev_wait_setup_link_complete(dev) &&
> > + rte_atomic32_test_and_set(&ad-
> > >link_thread_running)) {
> > if (rte_ctrl_thread_create(&ad-
> > >link_thread_tid,
> > "ixgbe-link-handler",
> > NULL,
> > --
> > 2.17.1
