> Subject: Re: [dpdk-dev] [PATCH v3 3/3] net/af_xdp: fix maximum MTU value
>
> On 02/10, Ciara Loftus wrote:
> >The maximum MTU for af_xdp zero copy is equal to the page size less the
> >frame overhead introduced by AF_XDP (XDP HR = 256) and DPDK (frame
> headroom
> >= 320). The patch updates this value to reflect this.
> >
> >This change also makes it possible to remove unneeded constants for both
> >zero-copy and copy mode.
> >
> >Fixes: d8a210774e1d ("net/af_xdp: support unaligned umem chunks")
> >Cc: sta...@dpdk.org
> >
> >Signed-off-by: Ciara Loftus <ciara.lof...@intel.com>
> >---
> > drivers/net/af_xdp/rte_eth_af_xdp.c | 23 +++++++++++------------
> > 1 file changed, 11 insertions(+), 12 deletions(-)
> >
> >diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c
> b/drivers/net/af_xdp/rte_eth_af_xdp.c
> >index 1e98cd44f..75f037c3e 100644
> >--- a/drivers/net/af_xdp/rte_eth_af_xdp.c
> >+++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
> >@@ -59,13 +59,6 @@ static int af_xdp_logtype;
> >
> > #define ETH_AF_XDP_FRAME_SIZE 2048
> > #define ETH_AF_XDP_NUM_BUFFERS 4096
> >-#ifdef XDP_UMEM_UNALIGNED_CHUNK_FLAG
> >-#define ETH_AF_XDP_MBUF_OVERHEAD 128 /* sizeof(struct
> rte_mbuf) */
> >-#define ETH_AF_XDP_DATA_HEADROOM \
> >- (ETH_AF_XDP_MBUF_OVERHEAD + RTE_PKTMBUF_HEADROOM)
> >-#else
> >-#define ETH_AF_XDP_DATA_HEADROOM 0
> >-#endif
> > #define ETH_AF_XDP_DFLT_NUM_DESCS
> XSK_RING_CONS__DEFAULT_NUM_DESCS
> > #define ETH_AF_XDP_DFLT_START_QUEUE_IDX 0
> > #define ETH_AF_XDP_DFLT_QUEUE_COUNT 1
> >@@ -602,7 +595,14 @@ eth_dev_info(struct rte_eth_dev *dev, struct
> rte_eth_dev_info *dev_info)
> > dev_info->max_tx_queues = internals->queue_cnt;
> >
> > dev_info->min_mtu = RTE_ETHER_MIN_MTU;
> >- dev_info->max_mtu = ETH_AF_XDP_FRAME_SIZE -
> ETH_AF_XDP_DATA_HEADROOM;
> >+#if defined(XDP_UMEM_UNALIGNED_CHUNK_FLAG)
> >+ dev_info->max_mtu = getpagesize() -
> >+ sizeof(struct rte_mempool_objhdr) -
> >+ sizeof(struct rte_mbuf) -
> >+ RTE_PKTMBUF_HEADROOM -
> XDP_PACKET_HEADROOM;
> >+#else
> >+ dev_info->max_mtu = ETH_AF_XDP_FRAME_SIZE;
>
> Do we need to subtract XDP_PACKET_HEADROOM for copy mode as well?
Good catch. I'll add this and spin a v4.
Thanks for the reviews.
Ciara
>
> Thanks,
> Xiaolong
>
> >+#endif
> >
> > dev_info->default_rxportconf.nb_queues = 1;
> > dev_info->default_txportconf.nb_queues = 1;
> >@@ -804,7 +804,7 @@ xsk_umem_info *xdp_umem_configure(struct
> pmd_internals *internals,
> > .fill_size = ETH_AF_XDP_DFLT_NUM_DESCS,
> > .comp_size = ETH_AF_XDP_DFLT_NUM_DESCS,
> > .frame_size = ETH_AF_XDP_FRAME_SIZE,
> >- .frame_headroom = ETH_AF_XDP_DATA_HEADROOM };
> >+ .frame_headroom = 0 };
> > char ring_name[RTE_RING_NAMESIZE];
> > char mz_name[RTE_MEMZONE_NAMESIZE];
> > int ret;
> >@@ -829,8 +829,7 @@ xsk_umem_info *xdp_umem_configure(struct
> pmd_internals *internals,
> >
> > for (i = 0; i < ETH_AF_XDP_NUM_BUFFERS; i++)
> > rte_ring_enqueue(umem->buf_ring,
> >- (void *)(i * ETH_AF_XDP_FRAME_SIZE +
> >- ETH_AF_XDP_DATA_HEADROOM));
> >+ (void *)(i * ETH_AF_XDP_FRAME_SIZE));
> >
> > snprintf(mz_name, sizeof(mz_name), "af_xdp_umem_%s_%u",
> > internals->if_name, rxq->xsk_queue_idx);
> >@@ -939,7 +938,7 @@ eth_rx_queue_setup(struct rte_eth_dev *dev,
> > /* Now get the space available for data in the mbuf */
> > buf_size = rte_pktmbuf_data_room_size(mb_pool) -
> > RTE_PKTMBUF_HEADROOM;
> >- data_size = ETH_AF_XDP_FRAME_SIZE -
> ETH_AF_XDP_DATA_HEADROOM;
> >+ data_size = ETH_AF_XDP_FRAME_SIZE;
> >
> > if (data_size > buf_size) {
> > AF_XDP_LOG(ERR, "%s: %d bytes will not fit in mbuf (%d
> bytes)\n",
> >--
> >2.17.1
> >
