Hi,
> -----Original Message-----
> From: Dekel Peled <dek...@mellanox.com>
> Sent: Wednesday, January 22, 2020 2:33 PM
> To: Matan Azrad <ma...@mellanox.com>; Slava Ovsiienko
> <viachesl...@mellanox.com>
> Cc: Raslan Darawsheh <rasl...@mellanox.com>; Ori Kam
> <or...@mellanox.com>; dev@dpdk.org; sta...@dpdk.org
> Subject: [PATCH] net/mlx5: fix setting of port ID for egress rules
>
> Previous patch fixed the setting of port-id for eswitch rules, which
> are ingress only.
> This patch expands the fix, to support nic rules as well, which can
> be ingress or egress.
>
> Fixes: ce777b147bf8 ("net/mlx5: fix E-Switch flow without port item")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Dekel Peled <dek...@mellanox.com>
> Acked-by: Ori Kam <or...@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index 5a1b426..7a169c7 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -7645,13 +7645,13 @@ struct field_modify_info modify_tcp[] = {
> item_flags |= last_item;
> }
> /*
> - * In case of ingress traffic when E-Switch mode is enabled,
> - * we have two cases where we need to set the source port
> manually.
> + * When E-Switch mode is enabled, we have two cases where we
> need to
> + * set the source port manually.
> * The first one, is in case of Nic steering rule, and the second is
> * E-Switch rule where no port_id item was found. In both cases
> * the source port is set according the current port in use.
> */
> - if ((attr->ingress && !(item_flags & MLX5_FLOW_ITEM_PORT_ID))
> &&
> + if (!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
> (priv->representor || priv->master)) {
> if (flow_dv_translate_item_port_id(dev, match_mask,
> match_value, NULL))
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
