> -----Original Message-----
> From: Shaw, Jeffrey B
> Sent: Thursday, February 12, 2015 1:33 AM
> To: Chen, Jing D
> Cc: dev at dpdk.org; Zhang, Helin; Qiu, Michael; nhorman at tuxdriver.com;
> thomas.monjalon at 6wind.com; david.marchand at 6wind.com
> Subject: Re: [PATCH v4 12/15] fm10k: Add scatter receive function
>
> On Wed, Feb 11, 2015 at 09:31:35AM +0800, Chen Jing D(Mark) wrote:
> >
> > +uint16_t
> > +fm10k_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> > + uint16_t nb_pkts)
> > +{
> > + struct rte_mbuf *mbuf;
> > + union fm10k_rx_desc desc;
> > + struct fm10k_rx_queue *q = rx_queue;
> > + uint16_t count = 0;
> > + uint16_t nb_rcv, nb_seg;
> > + int alloc = 0;
> > + uint16_t next_dd;
> > + struct rte_mbuf *first_seg = q->pkt_first_seg;
> > + struct rte_mbuf *last_seg = q->pkt_last_seg;
> > +
> > + next_dd = q->next_dd;
> > + nb_rcv = 0;
> > +
> > + nb_seg = RTE_MIN(nb_pkts, q->alloc_thresh);
> > + for (count = 0; count < nb_seg; count++) {
> > + mbuf = q->sw_ring[next_dd];
> > + desc = q->hw_ring[next_dd];
> > + if (!(desc.d.staterr & FM10K_RXD_STATUS_DD))
> > + break;
> > +#ifdef RTE_LIBRTE_FM10K_DEBUG_RX
> > + dump_rxd(&desc);
> > +#endif
> > +
> > + if (++next_dd == q->nb_desc) {
> > + next_dd = 0;
> > + alloc = 1;
> > + }
> > +
> > + /* Prefetch next mbuf while processing current one. */
> > + rte_prefetch0(q->sw_ring[next_dd]);
> > +
> > + /*
> > + * When next RX descriptor is on a cache-line boundary,
> > + * prefetch the next 4 RX descriptors and the next 8 pointers
> > + * to mbufs.
> > + */
> > + if ((next_dd & 0x3) == 0) {
> > + rte_prefetch0(&q->hw_ring[next_dd]);
> > + rte_prefetch0(&q->sw_ring[next_dd]);
> > + }
> > +
> > + /* Fill data length */
> > + rte_pktmbuf_data_len(mbuf) = desc.w.length;
> > +
> > + /*
> > + * If this is the first buffer of the received packet,
> > + * set the pointer to the first mbuf of the packet and
> > + * initialize its context.
> > + * Otherwise, update the total length and the number of
> segments
> > + * of the current scattered packet, and update the pointer to
> > + * the last mbuf of the current packet.
> > + */
> > + if (!first_seg) {
> > + first_seg = mbuf;
> > + first_seg->pkt_len = desc.w.length;
> > + } else {
> > + first_seg->pkt_len =
> > + (uint16_t)(first_seg->pkt_len +
> > + rte_pktmbuf_data_len(mbuf));
> > + first_seg->nb_segs++;
> > + last_seg->next = mbuf;
> > + }
> > +
> > + /*
> > + * If this is not the last buffer of the received packet,
> > + * update the pointer to the last mbuf of the current
> scattered
> > + * packet and continue to parse the RX ring.
> > + */
> > + if (!(desc.d.staterr & FM10K_RXD_STATUS_EOP)) {
> > + last_seg = mbuf;
> > + continue;
> > + }
> > +
> > + first_seg->ol_flags = 0;
> > +#ifdef RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE
> > + rx_desc_to_ol_flags(first_seg, &desc);
> > +#endif
> > + first_seg->hash.rss = desc.d.rss;
> > +
> > + /* Prefetch data of first segment, if configured to do so. */
> > + rte_packet_prefetch((char *)first_seg->buf_addr +
> > + first_seg->data_off);
> > +
> > + /*
> > + * Store the mbuf address into the next entry of the array
> > + * of returned packets.
> > + */
> > + rx_pkts[nb_rcv++] = first_seg;
> > +
> > + /*
> > + * Setup receipt context for a new packet.
> > + */
> > + first_seg = NULL;
> > + }
> > +
> > + q->next_dd = next_dd;
> > + q->pkt_first_seg = first_seg;
> > + q->pkt_last_seg = last_seg;
> > +
> > + if ((q->next_dd > q->next_trigger) || (alloc == 1)) {
> > + rte_mempool_get_bulk(q->mp, (void **)&q->sw_ring[q-
> >next_alloc],
> > + q->alloc_thresh);
>
> Same thing here. The return value should be checked in case the
> mempool runs out of buffers.
Thanks! I'll change accordingly.
>
> > + for (; q->next_alloc <= q->next_trigger; ++q->next_alloc) {
> > + mbuf = q->sw_ring[q->next_alloc];
> > +
> > + /* setup static mbuf fields */
> > + fm10k_pktmbuf_reset(mbuf, q->port_id);
> > +
> > + /* write descriptor */
> > + desc.q.pkt_addr =
> MBUF_DMA_ADDR_DEFAULT(mbuf);
> > + desc.q.hdr_addr =
> MBUF_DMA_ADDR_DEFAULT(mbuf);
> > + q->hw_ring[q->next_alloc] = desc;
> > + }
> > + FM10K_PCI_REG_WRITE(q->tail_ptr, q->next_trigger);
> > + q->next_trigger += q->alloc_thresh;
> > + if (q->next_trigger >= q->nb_desc) {
> > + q->next_trigger = q->alloc_thresh - 1;
> > + q->next_alloc = 0;
> > + }
> > + }
> > +
> > + return nb_rcv;
> > +}
> > +
