Hi,
> -----Original Message-----
> From: dev <dev-boun...@dpdk.org> On Behalf Of Suanming Mou
> Sent: Thursday, November 21, 2019 2:10 PM
> To: dev@dpdk.org
> Cc: Dekel Peled <dek...@mellanox.com>; sta...@dpdk.org
> Subject: [dpdk-dev] [PATCH v2] net/mlx5: fix incorrect L3/L4 layer chosen
> with tunnel
>
> For tunnel mode, there maybe two L3/L4 layer match pattern items,
> the inner layer follows the outer layer as the latter layer item,
> the TTL and port modify actions should handle the outermost layer.
>
> Current the outer and inner L3/L4 layers are both regared as the
> outer layer in flow_dv_attr_init(), it caueses actions may use the
> incorrect latter inner protocal for header modifier.
>
> Check former L3/L4 outer layer existence avoid set the incorrect inner
> layer to the flow attr.
>
> Fixes: 4bb14c83df95 ("net/mlx5: support modify header using Direct Verbs")
> Cc: dek...@mellanox.com
> Cc: sta...@dpdk.org
>
> Signed-off-by: Suanming Mou <suanmi...@mellanox.com>
> ---
>
> v2:
> * Add L4 layer check.
>
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index c402a8d..688291f 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -73,6 +73,9 @@
> /**
> * Initialize flow attributes structure according to flow items' types.
> *
> + * flow_dv_validate() avoids multiple L3/L4 layers cases other than tunnel
> + * mode. For tunnel mode, the items to be modified are the outermost
> ones.
> + *
> * @param[in] item
> * Pointer to item specification.
> * @param[out] attr
> @@ -84,16 +87,20 @@
> for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> switch (item->type) {
> case RTE_FLOW_ITEM_TYPE_IPV4:
> - attr->ipv4 = 1;
> + if (!attr->ipv6)
> + attr->ipv4 = 1;
> break;
> case RTE_FLOW_ITEM_TYPE_IPV6:
> - attr->ipv6 = 1;
> + if (!attr->ipv4)
> + attr->ipv6 = 1;
> break;
> case RTE_FLOW_ITEM_TYPE_UDP:
> - attr->udp = 1;
> + if (!attr->tcp)
> + attr->udp = 1;
> break;
> case RTE_FLOW_ITEM_TYPE_TCP:
> - attr->tcp = 1;
> + if (!attr->udp)
> + attr->tcp = 1;
> break;
> default:
> break;
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
