Hi Slava,
Thanks for your response. 1. Is the bug number is the follwoing? https://bugs.dpdk.org/show_bug.cgi?id=96 2.I've sent packets using scapy with the follwing script and I think it is unicast ICMP. How did you thought the packets are broadcast/muticast? Note that I am not familiar with log of testpmd. ---------------------------------------------------------------------------------------------- from scapy.all import * vlan_vid = 100 vlan_prio = 0 vlan_id = 0 vlan_flg = True src_mac = "CC:CC:CC:CC:CC:CC" dst_mac = "11:22:33:44:55:66" dst_ip = "192.168.200.101" iface = "p7p1" pps = 5 loop = 5 def icmp_send(): ls(Dot1Q) if vlan_flg: pkt = Ether(dst=dst_mac, src=src_mac)/Dot1Q(vlan=vlan_vid, prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP() else: pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP() pkt.show() sendpfast(pkt, iface=iface, pps=pps, loop=loop, file_cache=True) icmp_send() ----------------------------------------------------------------------------- Thanks! BR, Hideyuki Yamashita NTT TechnoCross > Hi, Hideyuki > > The frame in your report is broadcast/multicast. Please, try unicast one. > For broadcast we have the ticket, currently issue is under investigation. > Anyway, thanks for reporting. > > With best regards, Slava > > > -----Original Message----- > > From: Hideyuki Yamashita <yamashita.hidey...@ntt-tx.co.jp> > > Sent: Thursday, November 14, 2019 7:02 > > To: dev@dpdk.org > > Cc: Slava Ovsiienko <viachesl...@mellanox.com> > > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on > > VLAN header > > > > Hello Slava, > > > > As I reported to you, creating flow was successful with Connect-X5. > > However when I sent packets to the NIC from outer side of the host, I have > > problem. > > > > > > [Case 1] > > Packet distribution on multi-queue based on dst MAC address. > > > > NIC config: > > 04:00.0 Mellanox Connect-X5 > > 0.5.00.0 Intel XXV710 > > > > testpmd startup param: > > sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w > > 04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss > > --pkt- > > filter-mode=perfect > > > > flow command: > > testpmd> flow create 0 ingress pattern eth dst is 11:22:33:44:55:66 / > > testpmd> end actions queue index 1 / end > > Flow rule #0 created > > testpmd> flow create 1 ingress pattern eth dst is 11:22:33:44:55:66 type > > testpmd> mask 0xffff / end actions queue index 1 / end > > Flow rule #0 created > > > > Packet reception:(no VLAN tag) > > port 0/queue 0: received 1 packets > > src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 > > - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - > > sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0 > > ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD > > PKT_RX_OUTER_L4_CKSUM_UNKNOWN port 1/queue 0: sent 1 packets > > src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 > > - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - > > sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Send queue=0x0 > > ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD > > PKT_RX_OUTER_L4_CKSUM_UNKNOWN > > > > port 1/queue 1: received 1 packets > > src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 > > - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_ICMP - sw > > ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x1 > > ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD > > PKT_RX_OUTER_L4_CKSUM_UNKNOWN port 0/queue 1: sent 1 packets > > src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=60 > > - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_ICMP - sw > > ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Send queue=0x1 > > ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD > > PKT_RX_OUTER_L4_CKSUM_UNKNOWN > > > > Result: > > Matched packet queued to queue=0 port=0. Not queue=1, port=0. > > > > Expectation: > > When receiving packet which has dst MAC 11:22:33:44:55:66 should be > > received on queue=1 port=0. > > > > Question: > > Why matching packet is NOT enqueued into queue=1 on port=0? > > > > > > [Case 2] > > Packet distribution on multi-queue based on VLAN tag > > > > testpmd startup param: > > sudo ./testpmd -c 1ffff -n 4 --socket-mem=1024,1024 --log-level=10 -w > > 04:00.0,dv_flow_en=1 -w 05:00.0 -- -i --rxq=16 --txq=16 --disable-rss > > --pkt- > > filter-mode=perfect > > > > flow command: > > flow create 0 ingress group 1 pattern eth / vlan vid is 100 / end actions > > queue > > index 1 / of_pop_vlan / end flow create 0 ingress group 0 pattern eth / end > > actions jump group 1 / end > > > > Packet Reception: (VLAN100) > > port 0/queue 1: received 1 packets > > src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56 > > - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - > > sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x1 > > ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD > > PKT_RX_OUTER_L4_CKSUM_UNKNOWN port 1/queue 1: sent 1 packets > > src=CC:CC:CC:CC:CC:CC - dst=11:22:33:44:55:66 - type=0x0800 - length=56 > > - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - > > sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Send queue=0x1 > > ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD > > PKT_RX_OUTER_L4_CKSUM_UNKNOWN > > > > Result: > > Matched packetd queued to queue=1, port=0 Other packet(VLAN101 packet) > > discarded. > > > > Expectation: > > Matched packet queued to queue =1, port=0 Non Matched packet queued to > > queue=0, port=0 > > > > Question: > > Is above behavior collect? > > What is the default behavior of unmatchedd packets (queue to queue=0 or > > discard packet) > > > > BR, > > Hideyuki Yamashita > > NTT TechnoCross > > > > > > > > > >
