This patch implements use of the API for LRO aggregated packet
max size.
Rx queue create is updated to use the relevant configuration.
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dek...@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viachesl...@mellanox.com>
Acked-by: Matan Azrad <ma...@mellanox.com>
---
doc/guides/nics/mlx5.rst | 2 ++
drivers/net/mlx5/mlx5.h | 3 +++
drivers/net/mlx5/mlx5_ethdev.c | 1 +
drivers/net/mlx5/mlx5_rxq.c | 5 +++--
4 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 5fd313c..fd5a326 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -207,6 +207,8 @@ Limitations
- KEEP_CRC offload cannot be supported with LRO.
- The first mbuf length, without head-room, must be big enough to include
the
TCP header (122B).
+ - Rx queue with LRO offload enabled, receiving a non-LRO packet, can forward
+ it with size limited to max LRO size, not to max RX packet length.
Statistics
----------
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 511463a..0c3a90e 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -218,6 +218,9 @@ struct mlx5_hca_attr {
#define MLX5_LRO_SUPPORTED(dev) \
(((struct mlx5_priv *)((dev)->data->dev_private))->config.lro.supported)
+/* Maximal size of aggregated LRO packet. */
+#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
+
/* LRO configurations structure. */
struct mlx5_lro_config {
uint32_t supported:1; /* Whether LRO is supported. */
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 2b7c867..3adc824 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -606,6 +606,7 @@ struct ethtool_link_settings {
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
+ info->max_lro_pkt_size = MLX5_MAX_LRO_SIZE;
/*
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 24d0eaa..c725e14 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1701,7 +1701,6 @@ struct mlx5_rxq_obj *
return 0;
}
-#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
#define MLX5_MAX_TCP_HDR_OFFSET ((unsigned int)(sizeof(struct rte_ether_hdr) +
\
sizeof(struct rte_vlan_hdr) * 2 + \
sizeof(struct rte_ipv6_hdr)))
@@ -1773,7 +1772,9 @@ struct mlx5_rxq_ctrl *
dev->data->dev_conf.rxmode.offloads;
unsigned int lro_on_queue = !!(offloads & DEV_RX_OFFLOAD_TCP_LRO);
const int mprq_en = mlx5_check_mprq_support(dev) > 0;
- unsigned int max_rx_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
+ unsigned int max_rx_pkt_len = lro_on_queue ?
+ dev->data->dev_conf.rxmode.max_lro_pkt_size :
+ dev->data->dev_conf.rxmode.max_rx_pkt_len;
unsigned int non_scatter_min_mbuf_size = max_rx_pkt_len +
RTE_PKTMBUF_HEADROOM;
unsigned int max_lro_size = 0;
--
1.8.3.1
