Hi, Hideyuki > -----Original Message----- > From: Hideyuki Yamashita <yamashita.hidey...@ntt-tx.co.jp> > Sent: Wednesday, October 30, 2019 12:46 > To: Slava Ovsiienko <viachesl...@mellanox.com> > Cc: dev@dpdk.org > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on > VLAN header > > Hello Slava, > > Thanks for your help. > I added magic phrase. with chaging PCI number with proper one in my env.
> It changes situation but still result in error. > > I used /usertools/dpdk-setup.sh to allocate hugepage dynamically. > Your help is appreciated. > > I think it is getting closer. > tx_h-yamashita@R730n10:~/dpdk-next-net/x86_64-native-linuxapp- > gcc/app$ > sudo ./testpmd -c 0xF -n 4 -w 03:00.0,dv_flow_en=1 --socket-mem 512,512 - > -huge-dir=/mnt/h uge1G --log-level port:8 -- -i --portmask=0x1 --nb-cores=2 mlx5 PMD supports two flow engines: - Verbs, this is legacy one, almost no new features are being added, just bug fixes, provides slow rule insertion rate, etc. - Direct Rules, the new one, all new features are being added here. (We had one more intermediate engine - Direct Verbs, it was dropped, but prefix dv in dv_flow_en remains 😊) Verbs are supported over all NICs - ConnectX-4,ConnectX-4LX, ConnectX-5, ConnectX-6, etc. Direct Rules is supported for NICs starting from ConnectX-5. "dv_flow_en=1" partameter engages Direct Rules, but I see you run testpmd over 03:00.0 which is ConnectX-4, not supporting Direct Rules. Please, run over ConnectX-5 you have on your host. As for error - it is not related to memory, rdma core just failed to create the group table, because ConnectX-4 does not support DR. With best regards, Slava > --txq=16 --rxq=16 > EAL: Detected 48 lcore(s) > EAL: Detected 2 NUMA nodes > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > EAL: Selected IOVA mode 'PA' > EAL: Probing VFIO support... > EAL: PCI device 0000:03:00.0 on NUMA socket 0 > EAL: probe driver: 15b3:1015 net_mlx5 > net_mlx5: mlx5.c:1852: mlx5_dev_spawn(): can't query devx port 1 on device > mlx5_3 > > Interactive-mode selected > testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, > size=2176, socket=0 > testpmd: preferred mempool ops selected: ring_mp_mc > testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, > size=2176, socket=1 > testpmd: preferred mempool ops selected: ring_mp_mc > > Warning! port-topology=paired and odd forward ports number, the last port > will pair with itself. > > Configuring Port 0 (socket 0) > Port 0: B8:59:9F:DB:22:20 > Checking link statuses... > Done > testpmd> flow create 0 ingress group 1 priority 0 pattern eth dst is > testpmd> 00:16:3e:2e:7b:6a / vlan vid is 1480 / end actions of_pop_vlan > testpmd> / queue index 0 / end > Caught error type 1 (cause unspecified): cannot create table: Cannot allocate > memory > > > BR, > Hideyuki Yamashita
