On 29 Oct 2019, at 8:39, Zhang, Xiao wrote:
-----Original Message-----
From: Eelco Chaudron <echau...@redhat.com>
Sent: Friday, October 25, 2019 5:24 PM
To: Xing, Beilei <beilei.x...@intel.com>; Zhang, Xiao
<xiao.zh...@intel.com>
Cc: Zhang, Qi Z <qi.z.zh...@intel.com>; dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH] net/i40e: force promiscuous state
after VF
reset
On 17 Oct 2019, at 8:34, Xing, Beilei wrote:
On 17 Sep 2019, at 9:40, Eelco Chaudron wrote:
Even though the device reset is successful, disabling promiscuous
mode might not always succeed, causing enabling it after reset to
fail.
This would happen when the kernel driver requires a reset of the
VF.
This patch resets the internal state, so next time promiscuous
mode
is configured it will be enabled.
Signed-off-by: Eelco Chaudron <echau...@redhat.com>
---
drivers/net/i40e/i40e_ethdev_vf.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
b/drivers/net/i40e/i40e_ethdev_vf.c
index 551f6fa..e0f99a4 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -2276,11 +2276,21 @@ static int eth_i40evf_pci_remove(struct
rte_pci_device *pci_dev) i40evf_dev_reset(struct rte_eth_dev
*dev)
{
int ret;
+ struct i40e_vf *vf =
I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
ret = i40evf_dev_uninit(dev);
if (ret)
return ret;
+ /*
+ * Even though the device reset is successful disabling
promiscuous
+ * mode might not always succeed, causing enabling it after
reset
to
I think we need to root cause why fail to disable promiscuous mode
and
try to fix it first.
I’ve copied in Xiao who helped me identify the issue in your
driver.
The issue is because the change from kernel pf was not synced to DPDK
vf during
the closing period of reset, so we get this failure. Xiao can you add
more details?
The root cause is when kernel pf generate DPDK vf reset event, the
flag
vf->promisc_unicast_enabled will not be cleared but promiscuous mode
is
disabled. When trying to enable promiscuous mode next time by calling
i40evf_dev_promiscuous_enable won't work because it will check the
vf->promisc_unicast_enabled flag first.
static int
i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev)
{
...
/* If enabled, just return */
if (vf->promisc_unicast_enabled)
return 0;
...
}
Hi Eelco,
I think you may need add more detailed message in the commit log or
comments.
My interpretation of the request was that Beilei wanted to know why
disabling promiscuous mode in HW was failing. Beilei can you comment, is
the additional description from Xiao enough?
+ * fail. This would happen when the kernel driver requires a
reset
+ * of the VF.
+ */
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ vf->promisc_unicast_enabled = FALSE;
+
ret = i40evf_dev_init(dev);
return ret;
--
1.8.3.1
