> >Thank you for pointing this out. While it seems to me problem here is RX, >I >will also look into TX burst limitations. > >-a > >On 28 December 2015 at 00:17, Chas Williams <3chas3 at gmail.com> wrote: > >> I wouldn't consider myself an expert on this driver but while looking >> at some other things, I have noted that RTE_PMD_BNX2X_TX_MAX_BURST is >> defined to be 1. This bursts single packets to bnx2x_tx_encap() but it >> looks like bnx2x_tx_encap() is far more capable than that. >> >> On Tue, 2015-12-22 at 14:52 +0300, Alexander Belyakov wrote: >> > Hi, >> > >> > just tried to forward a lot of tiny packets with testpmd (dpdk-2.2.0) >> > running on Broadcom Corporation NetXtreme II BCM57810S 10 Gigabit >> > Ethernet >> > (rev 10) adapter. I see forwarding performance of 2.6Mpps instead of >> > expected 14.8Mpps. What should be done to achieve better results? >> > >> > Thank you, >> > Alexander Belyakov >> >
Alex/Chas, We have HW/FW limitation for PPS. The adapter can only do ~3 MPPS. However, yes we can revamp the Tx routines a bit to transmit multiple packets in a single burst at a time using single doorbelling mechanism. Thanks Harish ________________________________ This message and any attached documents contain information from the sending company or its parent company(s), subsidiaries, divisions or branch offices that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
