On Wed, Dec 16, 2015 at 8:28 PM, Yuanhan Liu
<yuanhan.liu at linux.intel.com> wrote:
> On Wed, Dec 16, 2015 at 08:09:40PM +0530, Santosh Shukla wrote:
>> On Wed, Dec 16, 2015 at 7:53 PM, Yuanhan Liu
>> <yuanhan.liu at linux.intel.com> wrote:
>> > On Wed, Dec 16, 2015 at 07:31:57PM +0530, Santosh Shukla wrote:
>> >> On Wed, Dec 16, 2015 at 7:18 PM, Yuanhan Liu
>> >> <yuanhan.liu at linux.intel.com> wrote:
>> >> > On Mon, Dec 14, 2015 at 06:30:24PM +0530, Santosh Shukla wrote:
>> >> >> In x86 case io_base to store ioport address not more than 65535
>> >> >> ioports. i.e..0
>> >> >> to ffff but in non-x86 case in particular arm64 it need to store more
>> >> >> than 32
>> >> >> bit address so changing io_base datatype from 32 to 64.
>> >> >>
>> >> >> Signed-off-by: Santosh Shukla <sshukla at mvista.com>
>> >> >> ---
>> >> >> drivers/net/virtio/virtio_ethdev.c | 2 +-
>> >> >> drivers/net/virtio/virtio_pci.h | 4 ++--
>> >> >> 2 files changed, 3 insertions(+), 3 deletions(-)
>> >> >>
>> >> >> diff --git a/drivers/net/virtio/virtio_ethdev.c
>> >> >> b/drivers/net/virtio/virtio_ethdev.c
>> >> >> index d928339..620e0d4 100644
>> >> >> --- a/drivers/net/virtio/virtio_ethdev.c
>> >> >> +++ b/drivers/net/virtio/virtio_ethdev.c
>> >> >> @@ -1291,7 +1291,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
>> >> >> return -1;
>> >> >>
>> >> >> hw->use_msix = virtio_has_msix(&pci_dev->addr);
>> >> >> - hw->io_base = (uint32_t)(uintptr_t)pci_dev->mem_resource[0].addr;
>> >> >> + hw->io_base = (uint64_t)(uintptr_t)pci_dev->mem_resource[0].addr;
>> >> >
>> >> > I'd suggest to move the io_base assignment (and cast) into
>> >> > virtio_ioport_init()
>> >> > so that we could do the correct cast there, say cast it to uint32_t for
>> >> > X86, and uint64_t for others.
>> >> >
>> >>
>> >> Ok.
>> >>
>> >> This was deliberately done considering your 1.0 virtio spec patch do
>> >> care for uint64_t types and in arm64 case, If I plan to use those
>> >> future patches, IMO it make more sense to me keep it in uint64_t way;
>> >
>> > I did different cast, 32 bit for legacy virtio pci device, and 64 bit
>> > for modern virtio pci device.
>> >
>> >> Also in x86 case max address could of type 0x1000-101f and so forth;
>> >> changing data-type to uint64_t default wont effect such address,
>> >> right?
>> >
>> > Right, but what's the harm of doing the right cast? :)
>> >
>>
>> Agree.
>>
>> >> And hw->io_base by looking at virtio_pci.h function like
>> >> inb/outb etc.. takes io_base address as unsigned long types which is
>> >> arch dependent; i.e.. 4 byte for 32 bit and 8 for 64 bit so the lower
>> >> level rd/wr apis are taking care of data-types accordingly.
>> >
>> > Didn't get it. inb/outb takes "unsigned short" arguments, but not
>> > "unsigned long".
>> >
>>
>> sys/io.h in x86 case using unsigned short int types..
>>
>> include/asm-generic/io.h for arm64 using it unsigned long (from linux
>> header files)
>>
>> In such case keeping
>> #define VIRTIO_PCI_REG_ADDR(hw, reg) \
>> (unsigned short)((hw)->io_base + (reg))
>>
>> would be x86 specific and what I thought and used in this patch is
>>
>> #define VIRTIO_PCI_REG_ADDR(hw, reg) \
>> (unsigned long)((hw)->io_base + (reg))
>>
>> to avoid ifdef ARM or non-x86..clutter, I know data-type is not right
>> fit for x86 sys/io.h but considering possible address inside
>> hw->io_base, wont effect functionality and performance my any mean.
>> That is why at virtio_ethdev_init() i choose to keep it in hw->io_base
>> = (uint64_t) types.
>>
>> Otherwise I'll have to duplicate VIRTIO_PCI_REG_XXX definition for
>> non-x86 case, Pl. suggest better alternative. Thanks
>
>
> My understanding is that if you have done the right cast in the first
> time (at the io_base assignment), casting from a short type to a longer
> type will not matter: the upper bits will be filled with zero.
>
> So, I guess we are fine here. I'm thinking that the extra cast in
> VIRTIO_PCI_REG_ADDR() is not necessary, as C will do the right
> cast for different inb(), say cast it to "unsigned short" for x86,
> and "unsigned long" for your arm implementation. The same to
> other io helpers.
>
so to summarize and correct me if i misunderstood,
keep hw->io_base = (uint64_t)
and remove extra cast {i.e.. (unsigned short) for x86 or (unsigned
long) for non-x86/arm64 case} in VIRTIO_PCI_REG_ADDR().
did I got everything alright?
> --yliu
