The patch [Fixes] sets the default value of required minimal
inline data to 0 bytes. On some configurations (depends
on switchdev/legacy settings and FW version/settings)
the ConnectX-4LX NIC requires minimal 18 bytes of
Tx descriptor inline data to operate correctly.
Wrongly set to 0 default value may prevent NIC from operating
with out-of-the-box settings, this patch reverts default
value for ConnectX-4LX back to 18 bytes (inline L2).
Fixes: 9f350504bb32 ("net/mlx5: fix ConnectX-4LX minimal inline data limit")
Signed-off-by: Viacheslav Ovsiienko <viachesl...@mellanox.com>
Acked-by: Matan Azrad <ma...@mellanox.com>
---
drivers/net/mlx5/mlx5.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 909c22e..a3eacdb 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -1325,12 +1325,9 @@ struct mlx5_dev_spawn_data {
switch (spawn->pci_dev->id.device_id) {
case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
- config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
- config->hw_vlan_insert = 0;
- break;
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
- config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
config->hw_vlan_insert = 0;
break;
case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
--
1.8.3.1
