> -----Original Message-----
> From: dev [mailto:[email protected]] On Behalf Of Xiao Zhang
> Sent: Monday, July 22, 2019 11:12 PM
> To: [email protected]
> Cc: Lu, Wenzhuo <[email protected]>; Zhao1, Wei
> <[email protected]>; Ye, Xiaolong <[email protected]>; Zhang, Xiao
> <[email protected]>; [email protected]
> Subject: [dpdk-dev] [v8] net/e1000: fix i219 hang on reset/close
>
> Unit hang may occur if multiple descriptors are available in the rings during
> reset or close. This state can be detected by configure status by bit 8 in
> register. If the bit is set and there are pending descriptors in one of the
> rings,
> we must flush them before reset or close.
>
> Fixes: 80580344("e1000: support EM devices (also known as e1000/e1000e)")
> Cc: [email protected]
>
> Signed-off-by: Xiao Zhang <[email protected]>
Reviewed-by: Xiaolong Ye <[email protected]>
Applied to dpdk-next-net-intel
Thanks
Qi
