This patch fills the tx_desc_lim.nb_seg_max and
tx_desc_lim.nb_mtu_seg_max fields of rte_eth_dev_info
structure to report thee maximal number of packet
segments, requested inline data configuration is
taken into account in conservative way.
Signed-off-by: Viacheslav Ovsiienko <viachesl...@mellanox.com>
---
drivers/net/mlx5/mlx5_ethdev.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 738d540..6c9bcf1 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -592,6 +592,42 @@ struct ethtool_link_settings {
}
/**
+ * Sets tx mbuf limiting parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] info
+ * Info structure output buffer.
+ */
+static void
+mlx5_set_txlimit_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int inlen;
+ uint16_t nb_max;
+
+ inlen = (config->txq_inline_max == MLX5_ARG_UNSET) ?
+ MLX5_SEND_DEF_INLINE_LEN :
+ (unsigned int)config->txq_inline_max;
+ assert(config->txq_inline_min >= 0);
+ inlen = RTE_MAX(inlen, (unsigned int)config->txq_inline_min);
+ inlen = RTE_MIN(inlen, MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE * 2);
+ nb_max = (MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE -
+ inlen) / MLX5_WSEG_SIZE;
+ info->tx_desc_lim.nb_seg_max = nb_max;
+ info->tx_desc_lim.nb_mtu_seg_max = nb_max;
+}
+
+/**
* DPDK callback to get information about the device.
*
* @param dev
@@ -634,6 +670,7 @@ struct ethtool_link_settings {
info->speed_capa = priv->link_speed_capa;
info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK;
mlx5_set_default_params(dev, info);
+ mlx5_set_txlimit_params(dev, info);
info->switch_info.name = dev->data->name;
info->switch_info.domain_id = priv->domain_id;
info->switch_info.port_id = priv->representor_id;
--
1.8.3.1
