> -----Original Message-----
> From: Lukasz Bartosik [mailto:lbarto...@marvell.com]
> Sent: Tuesday, April 30, 2019 3:56 PM
> To: Ananyev, Konstantin <konstantin.anan...@intel.com>
> Cc: dev@dpdk.org; ano...@marvell.com; Lukasz Bartosik <lbarto...@marvell.com>
> Subject: [PATCH] ipsec: include high order bytes of esn in pkt len
>
> When esn is used then high-order 32 bits are included in ICV
> calculation however are not transmitted. Update packet length
> to be consistent with auth data offset and length before crypto
> operation. High-order 32 bits of esn will be removed from packet
> length in crypto post processing.
Hi Lukasz,
Why you want to do it?
I deliberately didn't include SQH bits into the pkt_len/data_len,
because it is a temporary data and we are going to drop it anyway.
Konstantin
>
> Change-Id: I5ba50e341059a8d6a5e4ce7c626dfe7b9173740b
> Signed-off-by: Lukasz Bartosik <lbarto...@marvell.com>
> ---
> lib/librte_ipsec/esp_inb.c | 56
> +++++++++++++++++++++++++++++++++++++--------
> lib/librte_ipsec/esp_outb.c | 31 +++++++++++++++++++++++++
> lib/librte_ipsec/sa.c | 4 ++--
> lib/librte_ipsec/sa.h | 8 +++++++
> 4 files changed, 87 insertions(+), 12 deletions(-)
>
> diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
> index 4e0e12a..eb899e3 100644
> --- a/lib/librte_ipsec/esp_inb.c
> +++ b/lib/librte_ipsec/esp_inb.c
> @@ -16,7 +16,8 @@
> #include "pad.h"
>
> typedef uint16_t (*esp_inb_process_t)(const struct rte_ipsec_sa *sa,
> - struct rte_mbuf *mb[], uint32_t sqn[], uint32_t dr[], uint16_t num);
> + struct rte_mbuf *mb[], uint32_t sqn[], uint32_t dr[], uint16_t num,
> + uint8_t is_inline);
>
> /*
> * helper function to fill crypto_sym op for cipher+auth algorithms.
> @@ -181,6 +182,15 @@ inb_pkt_prepare(const struct rte_ipsec_sa *sa, const
> struct replay_sqn *rsn,
> icv->va = rte_pktmbuf_mtod_offset(ml, void *, icv_ofs);
> icv->pa = rte_pktmbuf_iova_offset(ml, icv_ofs);
>
> + /*
> + * if esn is used then high-order 32 bits are also used in ICV
> + * calculation but are not transmitted, update packet length
> + * to be consistent with auth data length and offset, this will
> + * be subtracted from packet length in post crypto processing
> + */
> + mb->pkt_len += sa->sqh_len;
> + ml->data_len += sa->sqh_len;
> +
> inb_pkt_xprepare(sa, sqn, icv);
> return plen;
> }
> @@ -373,14 +383,20 @@ tun_process_step3(struct rte_mbuf *mb, uint64_t
> txof_msk, uint64_t txof_val)
> */
> static inline uint16_t
> tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
> - uint32_t sqn[], uint32_t dr[], uint16_t num)
> + uint32_t sqn[], uint32_t dr[], uint16_t num, uint8_t is_inline)
> {
> uint32_t adj, i, k, tl;
> uint32_t hl[num];
> struct esp_tail espt[num];
> struct rte_mbuf *ml[num];
>
> - const uint32_t tlen = sa->icv_len + sizeof(espt[0]);
> + /*
> + * remove high-order 32 bits of esn from packet length
> + * which was added before crypto processing, this doesn't
> + * apply to inline case
> + */
> + const uint32_t tlen = sa->icv_len + sizeof(espt[0]) +
> + (is_inline ? 0 : sa->sqh_len);
> const uint32_t cofs = sa->ctp.cipher.offset;
>
> /*
> @@ -420,7 +436,7 @@ tun_process(const struct rte_ipsec_sa *sa, struct
> rte_mbuf *mb[],
> */
> static inline uint16_t
> trs_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
> - uint32_t sqn[], uint32_t dr[], uint16_t num)
> + uint32_t sqn[], uint32_t dr[], uint16_t num, uint8_t is_inline)
> {
> char *np;
> uint32_t i, k, l2, tl;
> @@ -428,7 +444,13 @@ trs_process(const struct rte_ipsec_sa *sa, struct
> rte_mbuf *mb[],
> struct esp_tail espt[num];
> struct rte_mbuf *ml[num];
>
> - const uint32_t tlen = sa->icv_len + sizeof(espt[0]);
> + /*
> + * remove high-order 32 bits of esn from packet length
> + * which was added before crypto processing, this doesn't
> + * apply to inline case
> + */
> + const uint32_t tlen = sa->icv_len + sizeof(espt[0]) +
> + (is_inline ? 0 : sa->sqh_len);
> const uint32_t cofs = sa->ctp.cipher.offset;
>
> /*
> @@ -496,8 +518,8 @@ esp_inb_rsn_update(struct rte_ipsec_sa *sa, const
> uint32_t sqn[],
> * process group of ESP inbound packets.
> */
> static inline uint16_t
> -esp_inb_pkt_process(const struct rte_ipsec_session *ss,
> - struct rte_mbuf *mb[], uint16_t num, esp_inb_process_t process)
> +esp_inb_pkt_process(const struct rte_ipsec_session *ss, struct rte_mbuf
> *mb[],
> + uint16_t num, uint8_t is_inline, esp_inb_process_t process)
> {
> uint32_t k, n;
> struct rte_ipsec_sa *sa;
> @@ -507,7 +529,7 @@ esp_inb_pkt_process(const struct rte_ipsec_session *ss,
> sa = ss->sa;
>
> /* process packets, extract seq numbers */
> - k = process(sa, mb, sqn, dr, num);
> + k = process(sa, mb, sqn, dr, num, is_inline);
>
> /* handle unprocessed mbufs */
> if (k != num && k != 0)
> @@ -533,7 +555,14 @@ uint16_t
> esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[], uint16_t num)
> {
> - return esp_inb_pkt_process(ss, mb, num, tun_process);
> + return esp_inb_pkt_process(ss, mb, num, 0, tun_process);
> +}
> +
> +uint16_t
> +inline_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
> + struct rte_mbuf *mb[], uint16_t num)
> +{
> + return esp_inb_pkt_process(ss, mb, num, 1, tun_process);
> }
>
> /*
> @@ -543,5 +572,12 @@ uint16_t
> esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[], uint16_t num)
> {
> - return esp_inb_pkt_process(ss, mb, num, trs_process);
> + return esp_inb_pkt_process(ss, mb, num, 0, trs_process);
> +}
> +
> +uint16_t
> +inline_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
> + struct rte_mbuf *mb[], uint16_t num)
> +{
> + return esp_inb_pkt_process(ss, mb, num, 1, trs_process);
> }
> diff --git a/lib/librte_ipsec/esp_outb.c b/lib/librte_ipsec/esp_outb.c
> index c798bc4..71a595e 100644
> --- a/lib/librte_ipsec/esp_outb.c
> +++ b/lib/librte_ipsec/esp_outb.c
> @@ -221,6 +221,7 @@ esp_outb_tun_prepare(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[],
> uint32_t i, k, n;
> uint64_t sqn;
> rte_be64_t sqc;
> + struct rte_mbuf *ml;
> struct rte_ipsec_sa *sa;
> struct rte_cryptodev_sym_session *cs;
> union sym_op_data icv;
> @@ -246,6 +247,19 @@ esp_outb_tun_prepare(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[],
>
> /* success, setup crypto op */
> if (rc >= 0) {
> + /*
> + * if esn is used then high-order 32 bits are also
> + * used in ICV calculation but are not transmitted,
> + * update packet length to be consistent with auth
> + * data length and offset, this will be subtracted
> + * from packet length in post crypto processing
> + */
> + if (sa->sqh_len) {
> + mb[i]->pkt_len += sa->sqh_len;
> + ml = rte_pktmbuf_lastseg(mb[i]);
> + ml->data_len += sa->sqh_len;
> + }
> +
> outb_pkt_xprepare(sa, sqc, &icv);
> lksd_none_cop_prepare(cop[k], cs, mb[i]);
> outb_cop_prepare(cop[k], sa, iv, &icv, 0, rc);
> @@ -356,6 +370,7 @@ esp_outb_trs_prepare(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[],
> uint32_t i, k, n, l2, l3;
> uint64_t sqn;
> rte_be64_t sqc;
> + struct rte_mbuf *ml;
> struct rte_ipsec_sa *sa;
> struct rte_cryptodev_sym_session *cs;
> union sym_op_data icv;
> @@ -384,6 +399,19 @@ esp_outb_trs_prepare(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[],
>
> /* success, setup crypto op */
> if (rc >= 0) {
> + /*
> + * if esn is used then high-order 32 bits are also
> + * used in ICV calculation but are not transmitted,
> + * update packet length to be consistent with auth
> + * data length and offset, this will be subtracted
> + * from packet length in post crypto processing
> + */
> + if (sa->sqh_len) {
> + mb[i]->pkt_len += sa->sqh_len;
> + ml = rte_pktmbuf_lastseg(mb[i]);
> + ml->data_len += sa->sqh_len;
> + }
> +
> outb_pkt_xprepare(sa, sqc, &icv);
> lksd_none_cop_prepare(cop[k], cs, mb[i]);
> outb_cop_prepare(cop[k], sa, iv, &icv, l2 + l3, rc);
> @@ -425,6 +453,9 @@ esp_outb_sqh_process(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[],
> for (i = 0; i != num; i++) {
> if ((mb[i]->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED) == 0) {
> ml = rte_pktmbuf_lastseg(mb[i]);
> + /* remove high-order 32 bits of esn from packet len */
> + mb[i]->pkt_len -= sa->sqh_len;
> + ml->data_len -= sa->sqh_len;
> icv = rte_pktmbuf_mtod_offset(ml, void *,
> ml->data_len - icv_len);
> remove_sqh(icv, icv_len);
> diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
> index 846e317..ff01358 100644
> --- a/lib/librte_ipsec/sa.c
> +++ b/lib/librte_ipsec/sa.c
> @@ -610,10 +610,10 @@ inline_crypto_pkt_func_select(const struct rte_ipsec_sa
> *sa,
> switch (sa->type & msk) {
> case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV4):
> case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV6):
> - pf->process = esp_inb_tun_pkt_process;
> + pf->process = inline_inb_tun_pkt_process;
> break;
> case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TRANS):
> - pf->process = esp_inb_trs_pkt_process;
> + pf->process = inline_inb_trs_pkt_process;
> break;
> case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV4):
> case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV6):
> diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
> index ffb5fb4..20c0a65 100644
> --- a/lib/librte_ipsec/sa.h
> +++ b/lib/librte_ipsec/sa.h
> @@ -143,9 +143,17 @@ esp_inb_tun_pkt_process(const struct rte_ipsec_session
> *ss,
> struct rte_mbuf *mb[], uint16_t num);
>
> uint16_t
> +inline_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
> + struct rte_mbuf *mb[], uint16_t num);
> +
> +uint16_t
> esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
> struct rte_mbuf *mb[], uint16_t num);
>
> +uint16_t
> +inline_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
> + struct rte_mbuf *mb[], uint16_t num);
> +
> /* outbound processing */
>
> uint16_t
> --
> 2.7.4
