Hi Qi,
> -----Original Message-----
> From: Zhang, Qi Z
> Sent: Friday, March 1, 2019 11:44 AM
> To: Lu, Wenzhuo <wenzhuo...@intel.com>; dev@dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo...@intel.com>
> Subject: RE: [dpdk-dev] [PATCH 3/8] net/ice: support RX SSE vector
>
> Hi
>
> > -----Original Message-----
> > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Wenzhuo Lu
> > Sent: Thursday, February 28, 2019 3:49 PM
> > To: dev@dpdk.org
> > Cc: Lu, Wenzhuo <wenzhuo...@intel.com>
> > Subject: [dpdk-dev] [PATCH 3/8] net/ice: support RX SSE vector
> >
> > Signed-off-by: Wenzhuo Lu <wenzhuo...@intel.com>
> > ---
> > config/common_base | 1 +
> > doc/guides/nics/features/ice_vec.ini | 38 +++
> > drivers/net/ice/Makefile | 3 +
> > drivers/net/ice/ice_ethdev.c | 2 -
> > drivers/net/ice/ice_ethdev.h | 2 +
> > drivers/net/ice/ice_rxtx.c | 27 +-
> > drivers/net/ice/ice_rxtx.h | 21 ++
> > drivers/net/ice/ice_rxtx_vec_common.h | 155 +++++++++++
> > drivers/net/ice/ice_rxtx_vec_sse.c | 487
> > ++++++++++++++++++++++++++++++++++
> > drivers/net/ice/meson.build | 6 +
> > 10 files changed, 738 insertions(+), 4 deletions(-) create mode
> > 100644 doc/guides/nics/features/ice_vec.ini
> > create mode 100644 drivers/net/ice/ice_rxtx_vec_common.h
> > create mode 100644 drivers/net/ice/ice_rxtx_vec_sse.c
> >
> > diff --git a/config/common_base b/config/common_base index
> > 7c6da51..1d5ae2e 100644
> > --- a/config/common_base
> > +++ b/config/common_base
> > @@ -305,6 +305,7 @@ CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
> > CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
> > CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
> > CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
> > +CONFIG_RTE_LIBRTE_ICE_INC_VECTOR=y
> >
> > # Compile burst-oriented AVF PMD driver # diff --git
> > a/doc/guides/nics/features/ice_vec.ini
> > b/doc/guides/nics/features/ice_vec.ini
> > new file mode 100644
> > index 0000000..1838f99
> > --- /dev/null
> > +++ b/doc/guides/nics/features/ice_vec.ini
> > @@ -0,0 +1,38 @@
> > +;
> > +; Supported features of the 'ice_vec' network poll mode driver.
> > +;
> > +; Refer to default.ini for the full list of available PMD features.
> > +;
> > +[Features]
> > +Speed capabilities = Y
> > +Link status = Y
> > +Link status event = Y
> > +Rx interrupt = Y
> > +Queue start/stop = Y
> > +MTU update = Y
> > +Jumbo frame = Y
> > +Scattered Rx = Y
> > +Promiscuous mode = Y
> > +Allmulticast mode = Y
> > +Unicast MAC filter = Y
> > +Multicast MAC filter = Y
> > +RSS hash = Y
> > +RSS key update = Y
> > +RSS reta update = Y
> > +VLAN filter = Y
> > +CRC offload = Y
> > +VLAN offload = Y
> > +QinQ offload = Y
> > +L3 checksum offload = Y
> > +L4 checksum offload = Y
>
> I think the QinQ an checksum offload is not supported by the vPMD , same
> as FVL, right?
O, They're not supported well. Only support RX checksum and QinQ filter. I'll
remove the words.
