Acked-by: Wei Zhao <wei.zh...@intel.com>

> -----Original Message-----
> From: Julien Meunier [mailto:julien.meun...@nokia.com]
> Sent: Thursday, February 21, 2019 5:06 AM
> To: Zhao1, Wei <wei.zh...@intel.com>; Zhang, Qi Z <qi.z.zh...@intel.com>;
> Lu, Wenzhuo <wenzhuo...@intel.com>; Ananyev, Konstantin
> <konstantin.anan...@intel.com>
> Cc: dev@dpdk.org
> Subject: [PATCH v3 2/2] net/ixgbe: add support of loopback for X540/X550
> 
> Loopback mode is also supported on X540 and X550 NICs, according to their
> datasheet (section 15.2). The way to set it up is a little different of the 
> 82599.
> 
> Signed-off-by: Julien Meunier <julien.meun...@nokia.com>
> ---
> v3:
> - reorganize and merge common code
> - restore MACC_FLU on stop
> v2:
> - disable / enable autoneg when loopback is requested for X540 / X550
> ---
>  drivers/net/ixgbe/ixgbe_ethdev.h |  7 +++---
>  drivers/net/ixgbe/ixgbe_rxtx.c   | 53
> ++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 55 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
> b/drivers/net/ixgbe/ixgbe_ethdev.h
> index 565c69c..99a5077 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> @@ -65,9 +65,10 @@
>  #define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT     500 /* 500us */
> 
>  /* Loopback operation modes */
> -/* 82599 specific loopback operation types */
> -#define IXGBE_LPBK_82599_NONE   0x0 /* Default value. Loopback is
> disabled. */
> -#define IXGBE_LPBK_82599_TX_RX  0x1 /* Tx->Rx loopback operation is
> enabled. */
> +#define IXGBE_LPBK_NONE   0x0 /* Default value. Loopback is disabled. */
> +#define IXGBE_LPBK_TX_RX  0x1 /* Tx->Rx loopback operation is enabled.
> +*/
> +/* X540-X550 specific loopback operations */
> +#define IXGBE_MII_AUTONEG_ENABLE        0x1000 /* Auto-negociation
> enable (default = 1) */
> 
>  #define IXGBE_MAX_JUMBO_FRAME_SIZE      0x2600 /* Maximum Jumbo
> frame size. */
> 
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
> index c9a70a8..e92a70f 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> @@ -3168,12 +3168,44 @@ ixgbe_dev_tx_descriptor_status(void *tx_queue,
> uint16_t offset)
>       return RTE_ETH_TX_DESC_FULL;
>  }
> 
> +/*
> + * Set up link loopback for X540/X550 mode Tx->Rx.
> + */
> +static inline void __attribute__((cold))
> +ixgbe_setup_loopback_link_x540_x550(struct ixgbe_hw *hw, bool enable)
> {
> +     uint32_t macc;
> +     PMD_INIT_FUNC_TRACE();
> +
> +     u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
> +
> +     hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> +                          IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> &autoneg_reg);
> +     macc = IXGBE_READ_REG(hw, IXGBE_MACC);
> +
> +     if (enable) {
> +             /* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
> +             autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
> +             /* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
> +             macc |= IXGBE_MACC_FLU;
> +     } else {
> +             autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
> +             macc &= ~IXGBE_MACC_FLU;
> +     }
> +
> +     hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> +                           IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> autoneg_reg);
> +
> +     IXGBE_WRITE_REG(hw, IXGBE_MACC, macc); }
> +
>  void __attribute__((cold))
>  ixgbe_dev_clear_queues(struct rte_eth_dev *dev)  {
>       unsigned i;
>       struct ixgbe_adapter *adapter =
>               (struct ixgbe_adapter *)dev->data->dev_private;
> +     struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> 
>       PMD_INIT_FUNC_TRACE();
> 
> @@ -3194,6 +3226,14 @@ ixgbe_dev_clear_queues(struct rte_eth_dev
> *dev)
>                       ixgbe_reset_rx_queue(adapter, rxq);
>               }
>       }
> +     /* If loopback mode was enabled, reconfigure the link accordingly */
> +     if (dev->data->dev_conf.lpbk_mode != 0) {
> +             if (hw->mac.type == ixgbe_mac_X540 ||
> +                  hw->mac.type == ixgbe_mac_X550 ||
> +                  hw->mac.type == ixgbe_mac_X550EM_x ||
> +                  hw->mac.type == ixgbe_mac_X550EM_a)
> +                     ixgbe_setup_loopback_link_x540_x550(hw, false);
> +     }
>  }
> 
>  void
> @@ -5074,8 +5114,12 @@ ixgbe_check_supported_loopback_mode(struct
> rte_eth_dev *dev)  {
>       struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> 
> -     if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
> -             if (hw->mac.type == ixgbe_mac_82599EB)
> +     if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
> +             if (hw->mac.type == ixgbe_mac_82599EB ||
> +                  hw->mac.type == ixgbe_mac_X540 ||
> +                  hw->mac.type == ixgbe_mac_X550 ||
> +                  hw->mac.type == ixgbe_mac_X550EM_x ||
> +                  hw->mac.type == ixgbe_mac_X550EM_a)
>                       return 0;
> 
>       return -ENOTSUP;
> @@ -5172,6 +5216,11 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>       if (dev->data->dev_conf.lpbk_mode != 0) {
>               if (hw->mac.type == ixgbe_mac_82599EB)
>                       ixgbe_setup_loopback_link_82599(hw);
> +             else if (hw->mac.type == ixgbe_mac_X540 ||
> +                  hw->mac.type == ixgbe_mac_X550 ||
> +                  hw->mac.type == ixgbe_mac_X550EM_x ||
> +                  hw->mac.type == ixgbe_mac_X550EM_a)
> +                     ixgbe_setup_loopback_link_x540_x550(hw, true);
>       }
> 
>  #ifdef RTE_LIBRTE_SECURITY
> --
> 2.10.2

Reply via email to