On 1/7/2019 6:44 PM, Chas Williams wrote:
>
>
> On 1/7/19 8:01 AM, Hari Kumar Vemula wrote:
>> Create bonded device test is failing due to improper initialisation in
>> bonded device configuration. which leads to crash while setting up queues.
>>
>> The value of nb_rx_desc is checked if it is not in range of rx_desc_lim of
>> bonded device which fails.
>> This is due to "rx_desc_lim" is set to 0 as default value of bonded device
>> during bond_alloc().
>> Hence nb_rx_desc (1024) is > 0 and test fails.
>>
>> Fix is to set the default values of rx_desc_lim of bonded device to
>> appropriate value.
>
> The default values for the bond device aren't known until the first
> slave is added. Can you explain your setup? What PMD are you
> using for testing?
As far as I understand, 'rte_eth_rx_queue_setup()' is failing with bond eth
device since 'nb_rx_desc' should be less than 'dev_info.rx_desc_lim.nb_max' but
bonding sets 0 to 'nb_max'.
But not sure how to handle this from bonding point of view, this patch gives
most permissive values, but should bonding get these values from its slaves?
>
>>
>> Fixes: 2efb58cbab ("bond: new link bonding library")
>> Cc: sta...@dpdk.org
>>
>> Signed-off-by: Hari Kumar Vemula <hari.kumarx.vem...@intel.com>
>> ---
>> drivers/net/bonding/rte_eth_bond_pmd.c | 11 +++++++----
>> 1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c
>> b/drivers/net/bonding/rte_eth_bond_pmd.c
>> index 44deaf119..e0888e960 100644
>> --- a/drivers/net/bonding/rte_eth_bond_pmd.c
>> +++ b/drivers/net/bonding/rte_eth_bond_pmd.c
>> @@ -2225,6 +2225,11 @@ static void
>> bond_ethdev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info
>> *dev_info)
>> {
>> struct bond_dev_private *internals = dev->data->dev_private;
>> + struct rte_eth_desc_lim bond_lim = {
>> + .nb_max = UINT16_MAX,
>> + .nb_min = 0,
>> + .nb_align = 1,
>> + };
>>
>> uint16_t max_nb_rx_queues = UINT16_MAX;
>> uint16_t max_nb_tx_queues = UINT16_MAX;
>> @@ -2263,10 +2268,8 @@ bond_ethdev_info(struct rte_eth_dev *dev, struct
>> rte_eth_dev_info *dev_info)
>> memcpy(&dev_info->default_txconf, &internals->default_txconf,
>> sizeof(dev_info->default_txconf));
>>
>> - memcpy(&dev_info->rx_desc_lim, &internals->rx_desc_lim,
>> - sizeof(dev_info->rx_desc_lim));
>> - memcpy(&dev_info->tx_desc_lim, &internals->tx_desc_lim,
>> - sizeof(dev_info->tx_desc_lim));
>> + dev_info->rx_desc_lim = bond_lim;
>> + dev_info->tx_desc_lim = bond_lim;
>>
>> /**
>> * If dedicated hw queues enabled for link bonding device in LACP mode
>>
