> -----Original Message-----
> From: Andrew Rybchenko <arybche...@solarflare.com>
> Sent: Wednesday, October 17, 2018 10:56 AM
> To: Ori Kam <or...@mellanox.com>; wenzhuo...@intel.com;
> jingjing...@intel.com; bernard.iremon...@intel.com; ferruh.yi...@intel.com;
> step...@networkplumber.org; Adrien Mazarguil
> <adrien.mazarg...@6wind.com>
> Cc: dev@dpdk.org; Dekel Peled <dek...@mellanox.com>; Thomas Monjalon
> <tho...@monjalon.net>; Nélio Laranjeiro <nelio.laranje...@6wind.com>;
> Yongseok Koh <ys...@mellanox.com>; Shahaf Shuler
> <shah...@mellanox.com>
> Subject: Re: [dpdk-dev] [PATCH v4 1/3] ethdev: add raw encapsulation action
>
> On 10/17/18 12:41 AM, Ori Kam wrote:
> Currenlty the encap/decap actions only support encapsulation
> of VXLAN and NVGRE L2 packets (L2 encapsulation is where
> the inner packet has a valid Ethernet header, while L3 encapsulation
> is where the inner packet doesn't have the Ethernet header).
> In addtion the parameter to to the encap action is a list of rte items,
> this results in 2 extra translation, between the application to the
> actioni and from the action to the NIC. This results in negetive impact
> on the insertion performance.
>
> Looking forward there are going to be a need to support many more tunnel
> encapsulations. For example MPLSoGRE, MPLSoUDP.
> Adding the new encapsulation will result in duplication of code.
> For example the code for handling NVGRE and VXLAN are exactly the same,
> and each new tunnel will have the same exact structure.
>
> This patch introduce a raw encapsulation that can support L2 tunnel types
> and L3 tunnel types. In addtion the new
> encapsulations commands are using raw buffer inorder to save the
> converstion time, both for the application and the PMD.
>
> In order to encapsulate L3 tunnel type there is a need to use both
> actions in the same rule: The decap to remove the L2 of the original
> packet, and then encap command to encapsulate the packet with the
> tunnel.
> For decap L3 there is also a need to use both commands in the same flow
> first the decap command to remove the outer tunnel header and then encap
> to add the L2 header.
>
> Signed-off-by: Ori Kam mailto:or...@mellanox.com
>
> [...]
>
>
>
> +Action: ``RAW_DECAP``
> +^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Remove outer header whose template is provided in it's data buffer,
>
> Typo: 'it's' -> its
>
Thanks will fix.
>
>
> +as defined in hte ``rte_flow_action_raw_decap``
>
> Typo above 'hte' -> 'the'.
>
Thanks will fix.
>
>
> +
> +This action modifies the payload of matched flows. The data supplied must
> +be a valid header, either holding layer 2 data in case of removing layer 2
> +before incapsulation of layer 3 tunnel (for example MPLSoGRE) or complete
> +tunnel definition starting from layer 2 and moving to the tunel item itself.
> +When applied to the original packet the resulting packet must be a
> +valid packet.
> +
> +.. _table_rte_flow_action_raw_decap:
> +
> +.. table:: RAW_DECAP
> +
> + +----------------+----------------------------------------+
> + | Field | Value |
> + +================+========================================+
> + | ``data`` | Decapsulation data |
>
> Sorry, I've missed the point why it is here. Is it used for matching?
> Why is the size insufficient?
>
No it is not used for matching this is only for the encapsulation data.
The data is for PMD that needs to validate that they can decapsulate
The packet, and on some PMD there might need the specify which headers
to remove and not just number of bytes.
>
> + +----------------+----------------------------------------+
> + | ``size`` | Size of data |
> + +----------------+----------------------------------------+
> +
> Action: ``SET_IPV4_SRC``
> ^^^^^^^^^^^^^^^^^^^^^^^^
>
> diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
> index bc9e719..1e5cd73 100644
> --- a/lib/librte_ethdev/rte_flow.c
> +++ b/lib/librte_ethdev/rte_flow.c
> @@ -123,6 +123,8 @@ struct rte_flow_desc_data {
> MK_FLOW_ACTION(VXLAN_DECAP, 0),
> MK_FLOW_ACTION(NVGRE_ENCAP, sizeof(struct
> rte_flow_action_vxlan_encap)),
> MK_FLOW_ACTION(NVGRE_DECAP, 0),
> + MK_FLOW_ACTION(RAW_ENCAP, sizeof(struct
> rte_flow_action_raw_encap)),
> + MK_FLOW_ACTION(RAW_DECAP, sizeof(struct
> rte_flow_action_raw_decap)),
> MK_FLOW_ACTION(SET_IPV4_SRC,
> sizeof(struct rte_flow_action_set_ipv4)),
> MK_FLOW_ACTION(SET_IPV4_DST,
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 68bbf57..3ae9de3 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -1508,6 +1508,20 @@ enum rte_flow_action_type {
> RTE_FLOW_ACTION_TYPE_NVGRE_DECAP,
>
> /**
> + * Adds outer header whose template is provided in it's data buffer
>
> Adds -> Add, it's -> its
>
Thanks will fix.
>
>
> + *
> + * See struct rte_flow_action_raw_encap.
> + */
> + RTE_FLOW_ACTION_TYPE_RAW_ENCAP,
> +
> + /**
> + * Remove outer header whose tempalte is provided in it's data buffer.
>
> it's -> its
>
Thanks will fix.
>
>
> + *
> + * See struct rte_flow_action_raw_decap
> + */
> + RTE_FLOW_ACTION_TYPE_RAW_DECAP,
> +
> + /**
> * Modify IPv4 source address in the outermost IPv4 header.
> *
> * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4,
> @@ -1946,6 +1960,51 @@ struct rte_flow_action_nvgre_encap {
> * @warning
> * @b EXPERIMENTAL: this structure may change without prior notice
> *
> + * RTE_FLOW_ACTION_TYPE_RAW_ENCAP
> + *
> + * Raw tunnel end-point encapsulation data definition.
> + *
> + * The data holds the headers definitions to be applied on the packet.
> + * The data must start with ETH header up to the tunnel item header itself.
> + * When used right after RAW_DECAP (for decapsulating L3 tunnel type for
> + * example MPLSoGRE) the data will just hold layer 2 header.
> + *
> + * The preserve parameter holds which bits in the packet the PMD is not
> allowd
>
> allowd -> allowed
Thanks will fix.
Best,
Ori
