On Sun, Oct 07, 2018 at 05:25:07PM +0300, Dekel Peled wrote:
> This patch adds support for Direct Verbs encap operations, L2 and L3.
>
> Signed-off-by: Dekel Peled <dek...@mellanox.com>
> ---
For flow_dv_create_encap(), flow_dv_create_encap_l3() and
flow_dv_create_action(), please make the 'dev' come first in the args list like
other functions.
And there are still two blank lines like I pointed out below.
With these changes, please put my acked-by tag when you submit the next version.
Thanks,
Yongseok
> drivers/net/mlx5/mlx5_flow_dv.c | 226
> +++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 222 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 80e7b24..221c76a 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -84,6 +84,167 @@
> }
>
> /**
> + * Validate the tunnel encap action.
> + *
> + * @param[in] action_flags
> + * holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the encap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> + */
> +static int
> +flow_dv_validate_action_tunnel_encap(uint64_t action_flags,
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + const struct rte_flow_action_tunnel_encap *tunnel_encap = action->conf;
> +
> + if (!tunnel_encap || !(tunnel_encap->buf))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, action,
> + "configuration cannot be null");
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't drop and encap in same flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't have 2 encap actions in same"
> + " flow");
> + if (attr->ingress)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
> + "encap action not supported for "
> + "ingress");
> + return 0;
> +}
> +
> +/**
> + * Validate the tunnel encap L3 action
> + *
> + * @param[in] action_flags
> + * holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the encap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> + */
> +static int
> +flow_dv_validate_action_tunnel_encap_l3(uint64_t action_flags,
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + const struct rte_flow_action_tunnel_encap_l3 *tunnel_encap_l3 =
> + action->conf;
> +
> + if (!tunnel_encap_l3 || !(tunnel_encap_l3->buf))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, action,
> + "configuration cannot be null");
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't drop and encap in same flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't have 2 encap actions in same"
> + " flow");
> + if (attr->ingress)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> + NULL,
> + "encap action not supported for "
> + "ingress");
> + return 0;
> +}
> +
> +/**
> + * Convert encap action to DV specification.
> + *
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_encap(const struct rte_flow_action *action,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *encap_verb = NULL;
> + const struct rte_flow_action_tunnel_encap *encap_data;
> + struct priv *priv = dev->data->dev_private;
> +
> + encap_data = (const struct rte_flow_action_tunnel_encap *)action->conf;
> + encap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> + (priv->ctx, encap_data->size,
> + encap_data->size ? encap_data->buf : NULL,
> + MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
> + if (!encap_verb)
> + rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create encap action");
> + return encap_verb;
> +}
> +
> +/**
> + * Convert encap L3 action to DV specification.
> + *
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_encap_l3(const struct rte_flow_action *action,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *encap_l3_verb = NULL;
> + const struct rte_flow_action_tunnel_encap_l3 *encap_l3_data;
> + struct priv *priv = dev->data->dev_private;
> +
> + encap_l3_data =
> + (const struct rte_flow_action_tunnel_encap_l3 *)action->conf;
> + encap_l3_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> + (priv->ctx, encap_l3_data->size,
> + encap_l3_data->size ? encap_l3_data->buf : NULL,
> + MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
> + if (!encap_l3_verb)
> + rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create encap L3 action");
> + return encap_l3_verb;
> +}
> +
> +/**
> * Verify the @p attributes will be correctly understood by the NIC and store
> * them in the @p flow if everything is correct.
> *
> @@ -330,6 +491,20 @@
> action_flags |= MLX5_FLOW_ACTION_COUNT;
> ++actions_n;
> break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP:
> + ret = flow_dv_validate_action_tunnel_encap
> + (action_flags, actions, attr, error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP;
> + break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3:
> + ret = flow_dv_validate_action_tunnel_encap_l3
> + (action_flags, actions, attr, error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -1042,10 +1217,19 @@
> * Flow action to translate.
> * @param[in, out] dev_flow
> * Pointer to the mlx5_flow.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> */
> -static void
> +static int
> flow_dv_create_action(const struct rte_flow_action *action,
> - struct mlx5_flow *dev_flow)
> + struct mlx5_flow *dev_flow,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> {
> const struct rte_flow_action_queue *queue;
> const struct rte_flow_action_rss *rss;
> @@ -1092,10 +1276,35 @@
> /* Added to array only in apply since we need the QP */
> flow->actions |= MLX5_FLOW_ACTION_RSS;
> break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_encap(action, dev, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.encap_verb =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP;
> + actions_n++;
> + break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_encap_l3(action, dev, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.encap_verb =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> + actions_n++;
> + break;
> default:
> break;
> }
> dev_flow->dv.actions_n = actions_n;
> + return 0;
> }
>
> static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
> @@ -1259,8 +1468,10 @@
> matcher.egress = attr->egress;
> if (flow_dv_matcher_register(dev, &matcher, dev_flow, error))
> return -rte_errno;
> - for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
> - flow_dv_create_action(actions, dev_flow);
> + for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
> + if (flow_dv_create_action(actions, dev_flow, dev, error))
> + return -rte_errno;
> + }
> return 0;
> }
>
> @@ -1444,6 +1655,13 @@
> LIST_REMOVE(dev_flow, next);
> if (dev_flow->dv.matcher)
> flow_dv_matcher_release(dev, dev_flow->dv.matcher);
> +
No blank line.
> + if (dev_flow->dv.encap_verb) {
> + claim_zero(mlx5_glue->destroy_flow_action
> + (dev_flow->dv.encap_verb));
> + dev_flow->dv.encap_verb = NULL;
> + }
> +
No blank line.
> rte_free(dev_flow);
> }
> }
> --
> 1.8.3.1
>
