Same as ixgbe. Should not be as chatty in log and should be
possible to compile away all the debug messages.
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
lib/librte_pmd_e1000/e1000_logs.h | 3 +--
lib/librte_pmd_e1000/em_ethdev.c | 10 ++++------
lib/librte_pmd_e1000/igb_ethdev.c | 16 ++++++----------
3 files changed, 11 insertions(+), 18 deletions(-)
diff --git a/lib/librte_pmd_e1000/e1000_logs.h
b/lib/librte_pmd_e1000/e1000_logs.h
index 4a92804..81e7bf5 100644
--- a/lib/librte_pmd_e1000/e1000_logs.h
+++ b/lib/librte_pmd_e1000/e1000_logs.h
@@ -35,8 +35,7 @@
#define _E1000_LOGS_H_
#define PMD_INIT_LOG(level, fmt, args...) \
- rte_log(RTE_LOG_ ## level, RTE_LOGTYPE_PMD, \
- "PMD: %s(): " fmt "\n", __func__, ##args)
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
#ifdef RTE_LIBRTE_E1000_DEBUG_INIT
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index 76f45c9..9189134 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -270,7 +270,7 @@ eth_em_dev_init(struct rte_eth_dev *eth_dev)
/* initialize the vfta */
memset(shadow_vfta, 0, sizeof(*shadow_vfta));
- PMD_INIT_LOG(INFO, "port_id %d vendorID=0x%x deviceID=0x%x",
+ PMD_INIT_LOG(DEBUG, "port_id %d vendorID=0x%x deviceID=0x%x",
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id);
@@ -1293,16 +1293,14 @@ eth_em_interrupt_action(struct rte_eth_dev *dev)
memset(&link, 0, sizeof(link));
rte_em_dev_atomic_read_link_status(dev, &link);
if (link.link_status) {
- PMD_INIT_LOG(INFO, " Port %d: Link Up - speed %u Mbps - %s",
+ PMD_INIT_LOG(DEBUG, " Port %d: Link Up - speed %u Mbps - %s",
dev->data->port_id, (unsigned)link.link_speed,
link.link_duplex == ETH_LINK_FULL_DUPLEX ?
"full-duplex" : "half-duplex");
} else {
- PMD_INIT_LOG(INFO, " Port %d: Link Down", dev->data->port_id);
+ PMD_INIT_LOG(DEBUG, " Port %d: Link Down", dev->data->port_id);
}
- PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
- dev->pci_dev->addr.domain, dev->pci_dev->addr.bus,
- dev->pci_dev->addr.devid, dev->pci_dev->addr.function);
+
tctl = E1000_READ_REG(hw, E1000_TCTL);
rctl = E1000_READ_REG(hw, E1000_RCTL);
if (link.link_status) {
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c
b/lib/librte_pmd_e1000/igb_ethdev.c
index b3892a5..7d00aed 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -580,7 +580,7 @@ eth_igb_dev_init(struct rte_eth_dev *eth_dev)
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
E1000_WRITE_FLUSH(hw);
- PMD_INIT_LOG(INFO, "port_id %d vendorID=0x%x deviceID=0x%x",
+ PMD_INIT_LOG(DEBUG, "port_id %d vendorID=0x%x deviceID=0x%x",
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id);
@@ -1906,21 +1906,17 @@ eth_igb_interrupt_action(struct rte_eth_dev *dev)
memset(&link, 0, sizeof(link));
rte_igb_dev_atomic_read_link_status(dev, &link);
if (link.link_status) {
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG,
" Port %d: Link Up - speed %u Mbps - %s",
dev->data->port_id,
(unsigned)link.link_speed,
link.link_duplex == ETH_LINK_FULL_DUPLEX ?
"full-duplex" : "half-duplex");
} else {
- PMD_INIT_LOG(INFO, " Port %d: Link Down",
+ PMD_INIT_LOG(DEBUG, " Port %d: Link Down",
dev->data->port_id);
}
- PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
- dev->pci_dev->addr.domain,
- dev->pci_dev->addr.bus,
- dev->pci_dev->addr.devid,
- dev->pci_dev->addr.function);
+
tctl = E1000_READ_REG(hw, E1000_TCTL);
rctl = E1000_READ_REG(hw, E1000_RCTL);
if (link.link_status) {
@@ -2204,12 +2200,12 @@ igbvf_dev_configure(struct rte_eth_dev *dev)
*/
#ifndef RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC
if (!conf->rxmode.hw_strip_crc) {
- PMD_INIT_LOG(INFO, "VF can't disable HW CRC Strip");
+ PMD_INIT_LOG(NOTICE, "VF can't disable HW CRC Strip");
conf->rxmode.hw_strip_crc = 1;
}
#else
if (conf->rxmode.hw_strip_crc) {
- PMD_INIT_LOG(INFO, "VF can't enable HW CRC Strip");
+ PMD_INIT_LOG(NOTICE, "VF can't enable HW CRC Strip");
conf->rxmode.hw_strip_crc = 0;
}
#endif
--
2.1.4
