Hi Konstantin,
On 9/18/2018 6:12 PM, Ananyev, Konstantin wrote:
I am not saying this should be the ONLY way to do as it does not work
very well with non NPU/FPGA class of SoC.
So how about making the proposed IPSec library as plugin/driver to
rte_security.
As I mentioned above, I don't think that pushing whole IPSec data-path into
rte_security
is the best possible approach.
Though I probably understand your concern:
In RFC code we always do whole prepare/process in SW (attach/remove ESP
headers/trailers, so paddings etc.),
i.e. right now only device types: RTE_SECURITY_ACTION_TYPE_NONE and
RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO are covered.
Though there are devices where most of prepare/process can be done in HW
(RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL/RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL),
plus in future could be devices where prepare/process would be split between
HW/SW in a custom way.
Is that so?
To address that issue I suppose we can do:
1. Add support for RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL and
RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL
security devices into ipsec.
We planned to do it anyway, just don't have it done yet.
2. For custom case - introduce RTE_SECURITY_ACTION_TYPE_INLINE_CUSTOM and
RTE_SECURITY_ACTION_TYPE_LOOKASIDE_CUSTOM
and add into rte_security_ops new functions:
uint16_t lookaside_prepare(struct rte_security_session *sess, struct
rte_mbuf *mb[], struct struct rte_crypto_op *cop[], uint16_t num);
uint16_t lookaside_process(struct rte_security_session *sess, struct
rte_mbuf *mb[], struct struct rte_crypto_op *cop[], uint16_t num);
uint16_t inline_process(struct rte_security_session *sess, struct rte_mbuf
*mb[], struct struct rte_crypto_op *cop[], uint16_t num);
So for custom HW, PMD can overwrite normal prepare/process behavior.
Actually after another thought:
My previous assumption (probably wrong one) was that for both
RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL and
RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL
devices can do whole data-path ipsec processing totally in HW - no need for any
SW support (except init/config).
Now looking at dpaa and dpaa2 devices (the only ones that supports
RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL right now)
I am not so sure about that - looks like some SW help might be needed for
replay window updates, etc.
Hemant, Shreyansh - can you guys confirm what is expected from
RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL devices
(HW/SW roses/responsibilities)?
About RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL - I didn't find any driver
inside DPDK source tree that does support that capability.
So my question is there any devices/drivers that do support it?
If so, where could source code could be found, and what are HW/SW
roles/responsibilities for that type of devices?
Konstantin
In case of LOOKASIDE, the protocol errors like antireplay and sequence
number overflow shall be the responsibility of either PMD or the HW.
It should notify the application that the error has occurred and
application need to decide what it needs to decide next.
As Jerin said in other email, the roles/responsibility of the PMD in
case of inline proto and lookaside case, nothing much is required from
the application to do any processing for ipsec.
As per my understanding, the proposed RFC is to make the application
code cleaner for the protocol processing.
1. For inline proto and lookaside there won't be any change in the data
path. The main changes would be in the control path.
2. But in case of inline crypto and RTE_SECURITY_ACTION_TYPE_NONE, the
protocol processing will be done in the library and there would be
changes in both control and data path.
As the rte_security currently provide generic APIs for control path only
and we may have it expanded for protocol specific datapath processing.
So for the application, working with inline crypto/ inline proto would
be quite similar and it won't need to do some extra processing for
inline crypto.
Same will be the case for RTE_SECURITY_ACTION_TYPE_NONE and lookaside.
We may have the protocol specific APIs reside inside the rte_security
and we can use either the crypto/net PMD underneath it.
Moving the SPD lookup inside the ipsec library may not be beneficial in
terms of performance as well as configurability for the application. It
would just be based on the rss hash.
Please let me know if my understanding is not correct anywhere.
-Akhil
