Signed-off-by: Hemant Agrawal <hemant.agra...@nxp.com> --- v3: merge the patches
doc/guides/cryptodevs/dpaa2_sec.rst | 28 +++-------- doc/guides/eventdevs/dpaa2.rst | 50 ++----------------- doc/guides/nics/dpaa2.rst | 49 ++----------------- doc/guides/platform/dpaa2.rst | 98 +++++++++++++++++++++++++++++++++++++ doc/guides/platform/index.rst | 1 + 5 files changed, 114 insertions(+), 112 deletions(-) create mode 100644 doc/guides/platform/dpaa2.rst diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst index 9191704..aee79ab 100644 --- a/doc/guides/cryptodevs/dpaa2_sec.rst +++ b/doc/guides/cryptodevs/dpaa2_sec.rst @@ -129,7 +129,7 @@ AEAD algorithms: Supported DPAA2 SoCs -------------------- -* LS2080A/LS2040A +* LS2160A * LS2084A/LS2044A * LS2088A/LS2048A * LS1088A/LS1048A @@ -157,31 +157,15 @@ Prerequisites DPAA2_SEC driver has similar pre-requisites as described in :ref:`dpaa2_overview`. The following dependencies are not part of DPDK and must be installed separately: -* **NXP Linux SDK** - - NXP Linux software development kit (SDK) includes support for the family - of QorIQ® ARM-Architecture-based system on chip (SoC) processors - and corresponding boards. - - It includes the Linux board support packages (BSPs) for NXP SoCs, - a fully operational tool chain, kernel and board specific modules. - - SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_. - -* **DPDK Extra Scripts** - - DPAA2 based resources can be configured easily with the help of ready scripts - as provided in the DPDK helper repository. - - `DPDK Extra Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_. +See :doc:`../platform/dpaa2` for setup information Currently supported by DPDK: -* NXP SDK **17.08+**. -* MC Firmware version **10.3.1** and higher. -* Supported architectures: **arm64 LE**. +- NXP SDK **18.09+**. +- MC Firmware version **10.10.0** and higher. +- Supported architectures: **arm64 LE**. -* Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. +- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. Pre-Installation Configuration ------------------------------ diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst index ad94f24..2b1700a 100644 --- a/doc/guides/eventdevs/dpaa2.rst +++ b/doc/guides/eventdevs/dpaa2.rst @@ -26,7 +26,7 @@ The DPAA2 EVENTDEV implements many features in the eventdev API; Supported DPAA2 SoCs -------------------- -- LS2080A/LS2040A +- LX2160A - LS2084A/LS2044A - LS2088A/LS2048A - LS1088A/LS1048A @@ -34,52 +34,12 @@ Supported DPAA2 SoCs Prerequisites ------------- -There are three main pre-requisities for executing DPAA2 EVENTDEV on a DPAA2 -compatible board: - -1. **ARM 64 Tool Chain** - - For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_. - -2. **Linux Kernel** - - It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_. - -3. **Rootfile system** - - Any *aarch64* supporting filesystem can be used. For example, - Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained - from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_. - -As an alternative method, DPAA2 EVENTDEV can also be executed using images provided -as part of SDK from NXP. The SDK includes all the above prerequisites necessary -to bring up a DPAA2 board. - -The following dependencies are not part of DPDK and must be installed -separately: - -- **NXP Linux SDK** - - NXP Linux software development kit (SDK) includes support for family - of QorIQ® ARM-Architecture-based system on chip (SoC) processors - and corresponding boards. - - It includes the Linux board support packages (BSPs) for NXP SoCs, - a fully operational tool chain, kernel and board specific modules. - - SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_. - -- **DPDK Extra Scripts** - - DPAA2 based resources can be configured easily with the help of ready scripts - as provided in the DPDK Extra repository. - - `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_. +See :doc:`../platform/dpaa2` for setup information Currently supported by DPDK: -- NXP SDK **2.0+**. -- MC Firmware version **10.0.0** and higher. +- NXP SDK **18.09+**. +- MC Firmware version **10.10.0** and higher. - Supported architectures: **arm64 LE**. - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. @@ -155,4 +115,4 @@ DPAA2 drivers for DPDK can only work on NXP SoCs as listed in the Port-core binding ~~~~~~~~~~~~~~~~~ -DPAA2 EVENTDEV driver requires event port 'x' to be used on core 'x'. +DPAA2 EVENTDEV can support only one eventport per core. diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst index 66c03e1..53fb767 100644 --- a/doc/guides/nics/dpaa2.rst +++ b/doc/guides/nics/dpaa2.rst @@ -409,8 +409,7 @@ Features of the DPAA2 PMD are: Supported DPAA2 SoCs -------------------- - -- LS2080A/LS2040A +- LX2160A - LS2084A/LS2044A - LS2088A/LS2048A - LS1088A/LS1048A @@ -418,52 +417,12 @@ Supported DPAA2 SoCs Prerequisites ------------- -There are three main pre-requisities for executing DPAA2 PMD on a DPAA2 -compatible board: - -1. **ARM 64 Tool Chain** - - For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_. - -2. **Linux Kernel** - - It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_. - -3. **Rootfile system** - - Any *aarch64* supporting filesystem can be used. For example, - Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained - from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_. - -As an alternative method, DPAA2 PMD can also be executed using images provided -as part of SDK from NXP. The SDK includes all the above prerequisites necessary -to bring up a DPAA2 board. - -The following dependencies are not part of DPDK and must be installed -separately: - -- **NXP Linux SDK** - - NXP Linux software development kit (SDK) includes support for family - of QorIQ® ARM-Architecture-based system on chip (SoC) processors - and corresponding boards. - - It includes the Linux board support packages (BSPs) for NXP SoCs, - a fully operational tool chain, kernel and board specific modules. - - SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_. - -- **DPDK Extra Scripts** - - DPAA2 based resources can be configured easily with the help of ready scripts - as provided in the DPDK Extra repository. - - `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_. +See :doc:`../platform/dpaa2` for setup information Currently supported by DPDK: -- NXP SDK **17.08+**. -- MC Firmware version **10.3.1** and higher. +- NXP SDK **18.09+**. +- MC Firmware version **10.10.0** and higher. - Supported architectures: **arm64 LE**. - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. diff --git a/doc/guides/platform/dpaa2.rst b/doc/guides/platform/dpaa2.rst new file mode 100644 index 0000000..e9f4399 --- /dev/null +++ b/doc/guides/platform/dpaa2.rst @@ -0,0 +1,98 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2018 NXP + +NXP QorIQ DPAA2 Board Support Package +===================================== + +This doc has information about steps to setup NXP QoriQ DPAA2 platform +and information about common offload hw block drivers of +**NXP QorIQ DPAA2** SoC family. + +Supported DPAA2 SoCs +-------------------- + +- LX2160A +- LS2084A/LS2044A +- LS2088A/LS2048A +- LS1088A/LS1048A + +More information about SoC can be found at `NXP Official Website +<https://www.nxp.com/products/processors-and-microcontrollers/arm-based- +processors-and-mcus/qoriq-layerscape-arm-processors:QORIQ-ARM>`_. + + +Common Offload HW Block Drivers +------------------------------- + +1. **Nics Driver** + See :doc:`../nics/dpaa2` for NXP dpaa2 nic driver information. + +2. **Cryptodev Driver** + See :doc:`../cryptodevs/dpaa2_sec` for NXP dpaa2 cryptodev driver information. + +3. **Eventdev Driver** + See :doc:`../eventdevs/dpaa2` for NXP dpaa2 eventdev driver information. + + +Steps To Setup Platform +----------------------- + +There are four main pre-requisities for executing DPAA2 PMD on a DPAA2 +compatible board: + +1. **ARM 64 Tool Chain** + + For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05/aarch64-linux-gnu/gcc-linaro-7.3.1-2018.05-i686_aarch64-linux-gnu.tar.xz>`_. + +2. **Linux Kernel** + + It can be obtained from `NXP's Github hosting <https://source.codeaurora.org/external/qoriq/qoriq-components/linux>`_. + +3. **Rootfile system** + + Any *aarch64* supporting filesystem can be used. For example, + Ubuntu 16.04 LTS (Xenial) or 18.04 (Bionic) userland which can be obtained + from `here + <http://cdimage.ubuntu.com/ubuntu-base/releases/18.04/release/ubuntu-base-18.04.1-base-arm64.tar.gz>`_. + +4. **Resource Scripts** + + DPAA2 based resources can be configured easily with the help of ready scripts + as provided in the DPDK Extra repository. + +As an alternative method, DPAA2 PMD can also be executed using images provided +as part of SDK from NXP. The SDK includes all the above prerequisites necessary +to bring up a DPAA2 board. + +The following dependencies are not part of DPDK and must be installed +separately: + +- **NXP Linux SDK** + + NXP Linux software development kit (SDK) includes support for family + of QorIQ® ARM-Architecture-based system on chip (SoC) processors + and corresponding boards. + + It includes the Linux board support packages (BSPs) for NXP SoCs, + a fully operational tool chain, kernel and board specific modules. + + SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_. + + +.. _extra_scripts: + +- **DPDK Extra Scripts** + + DPAA2 based resources can be configured easily with the help of ready scripts + as provided in the DPDK Extra repository. + + `DPDK Extras Scripts <https://source.codeaurora.org/external/qoriq/qoriq-components/dpdk-extras>`_. + +Currently supported by DPDK: + +- NXP SDK **2.0+** (preferred: LSDK 18.09). +- MC Firmware version **10.10.0** and higher. +- Supported architectures: **arm64 LE**. + +- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` + to setup the basic DPDK environment. diff --git a/doc/guides/platform/index.rst b/doc/guides/platform/index.rst index fc7c6d4..98c6638 100644 --- a/doc/guides/platform/index.rst +++ b/doc/guides/platform/index.rst @@ -11,4 +11,5 @@ The following are platform specific guides and setup information. :numbered: dpaa + dpaa2 octeontx -- 2.7.4
